Abstract:Recently tetrapod piled jacket (TPJ) foundations are considered as a promising solution for offshore wind turbines in waters with depths ranging from 20 m to 50 m. This paper presents a numerical study into the monotonic lateral loading behaviour of TPJ foundations in medium sand, in terms of overall load-displacement responses of TPJ foundations and internal force within individual corner piles as well as pile-soil interaction. The results of previous centrifuge model tests are used to provide high-quality verification for the development of a 3D finite element model established by ABAQUS. A series of parametric studies is then carried out to look into more detailed response of TPJ foundations subjected to lateral loads, including the influence of spacing and slenderness ratio of piles, loading height as well as soil friction angle. The numerical results show that there are two various deformation models of TPJ foundations during lateral loading. One is shearing dominated deformation model under smaller loads, while another one is overturning dominated model under larger loads. Moreover, the lateral soil-pile interaction is found to be greatly influenced by enhancing/weakening effects of the axial forces of individual piles. The cause of this phenomenon is primarily due to the change in soil stress induced by pile vertical movement and radial deformation. To quantify this effect on pile-soil interaction of TPJ foundation, an enhancement factor Gamma(s), defined as the ratio of the soil resistance on downwind piles to that on upwind piles, is proposed. Consequently, the relationship between Gamma(s), depth of influence zone z(c )and four parameters are carefully investigated. For simplicity, the Gamma(s) is assumed constant and independent with pile lateral deflection as well as soil depths, based on which the values for Gamma(s) and z(c) are recommended for practical design uses. It is highlighted in the present study that these values should be chosen based on the specific loading conditions to provide much safer and more robust design for TPJ foundations.

Transmission Pole Foundations: Alternate Design Methods for Direct-Embedded Round, Wood Transmission Poles

Improved Design of Embedment Depths for Transmission Pole Foundations Subject to Lateral Loading

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Design of Direct Embedment Foundations for Poles Under Moment Loads in Granular Soils

Foundation Stability of Wood-Pole H-Frame Structures for Transmission Lines [includes discussion]

Calculation Method of Uplift Capacity of Pile-Anchor Composite Foundation and Influence of Parameters

Numerical Investigation on the Lateral Loading Behaviour of Tetrapod Piled Jacket Foundations in Medium Dense Sand

A feasibility study on construction methods of high voltage transmission towers’ foundations

Caisson-Bored Pile Composite Anchorage Foundation for Long-Span Suspension Bridge: Feasibility Study and Parametric Analysis

Steel Finned-Pipe Foundations for Single Pole Structures

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Numerical simulation of the uplift bearing behavior of pile foundations for transmission towers in expansive soil area

FEM Analysis and Design of Long Short Pile Composite Foundation

On Load-Bearing and Soil-Reacting Characteristics of Hybrid Pile-Bucket Foundations Subjected to Static Horizontal Loading

Ultimate Uplift Capacity of Transmission Tower Foundation in Undisturbed Excavated Soil

Construction Design of Prestressed Cast in place Piles for Transmission Line Engineering in Plateau Areas

Load-carrying behavior of tranmission-tower connected foundations subjected to different load directions

VERIFICATION OF SIGNAL POLE SHAFT FOUNDATION LRFD DESIGN USING FINITE ELEMENT METHOD

Study of the Prevention Method of ±800 kV Transmission Tower Foundation Deviation

Centrifuge Model Test Study of Static and Cyclic Behavior of a Pile Foundation for an Offshore Wind Generator