Abstract:Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor (TFET) is considered as one of the most promising low-power devices that can simultane-ously obtain low off-state current (IOFF), high on-state current (ION) and steep subthreshold swing (SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need. The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabri-cating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable. Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the defor-mation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film, which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape (TRT) is proposed. Based on the method we proposed, the MoS2/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS2 film with the relatively high crystal quality is confirmed by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman characterizations. Besides, the prominent negative differential resistance (NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS2/Si heterojunction. The bilayer MoS2/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.

Enhance Carrier Diffusion of Monolayer MoSe 2 by Interface Engineering

Enhancing Carrier Mobility in Monolayer MoS 2 Transistors with Process-Induced Strain

Multiphysics Modeling and Simulation of Carrier Dynamics and Thermal Transport in Monolayer MoS2/WSe2 Heterojunction

Enhancement of Carrier Mobility in Semiconductor Nanostructures by Carrier Distribution Engineering

Evolution Application of Two-Dimensional MoS2-Based Field-Effect Transistors

Enhancement of Carrier Mobility in Mos2 Field Effect Transistors by A Sio2 Protective Layer

A "click" Reaction to Engineer MoS2 Field-Effect Transistors with Low Contact Resistance.

MoS2/Si Tunnel Diodes Based on Comprehensive Transfer Technique

Strain Engineering for Enhancing Carrier Mobility in MoTe2 Field-Effect Transistors

Effect of Dielectric Interface on the Performance of MoS2 Transistors.

Enhanced Carrier Transport by Transition Metal Doping in WS2 Field Effect Transistors

Enhancement of Carrier Mobility in Multilayer InSe Transistors by van der Waals Integration

Enhancing the Carrier Transport in Monolayer MoS2 Through Interlayer Coupling with 2D Covalent Organic Frameworks

Enhancing the Performance of MoS2 Field-Effect Transistors Using Self-Assembled Monolayers: A Promising Strategy to Alleviate Dielectric Layer Scattering and Improve Device Performance

Wafer-scale Transferred Multilayer MoS2 for High Performance Field Effect Transistors

Scaling of MoS 2 Transistors and Inverters to Sub-10 nm Channel Length with High Performance

Improving electron mobility in MoS 2 field-effect transistors by optimizing the interface contact and enhancing the channel conductance through local structural phase transition

Interface Engineering for Efficient Photocarrier Generation and Transfer in Strongly Coupled Metallic/Semiconducting 1T'/2H MoS2 Heterobilayers.

Carrier Modulation in 2D Transistors by Inserting Interfacial Dielectric Layer for Area-Efficient Computation

Interfacial Flat-Lying Molecular Monolayers for Performance Enhancement in Organic Field-Effect Transistors

Performance and stability improvement of CVD monolayer MoS2 transistors through HfO2 dielectrics engineering