Abstract:The global demand for lithium-ion batteries (LIBs) is ever-increasing as many nations seek to achieve a net carbon neutrality by the late 2030s. LiNi x Mn y Co 1– x – y O 2 , (NMC) is one of the most widely-used Li-ion cathode active materials. Despite its excellent performance (e.g., reversible capacities up to ~220 mA h g –1 and 500+ cycles), NMC contains both Ni and Co, which are expensive and have vulnerable supply chains. Li-excess disordered rock salt (DRX) materials are promising new cathode materials that utilize earth-abundant transition metals such as Mn and Ti. Through a combination of cationic and anionic charge compensation, DRX materials can attain specific energies ≥700 Wh kg –1 . Doping F – into the DRX structure (Li 1+ x Mn y Ti 2–1– x – y O 2– z F z ) has been reported to improve the material’s cycling stability. Despite their promising properties, most DRX cathodes are prepared through solid-state synthesis routes which require high-energy milling, provide little-to-no control over the particle morphology, and are difficult to scale. In this work, we developed a scalable combustion synthesis route (the glycine nitrate process) to produce high purity, high performance DRX cathodes. More specifically, we prepared two DRX precursors with nominal compositions of Li 1.2 Mn 0.5 Ti 0.3 O 1.95 and Li 1.2 Mn 0.7 Ti 0.1 O 1.85 . When the precursors were heated under Ar to 1000 °C for 1 – 4 h, only 50% Li 1.2 Mn 0.5 Ti 0.3 O 1.95 adopted a DRX structure, and no DRX formed for Li 1.2 Mn 0.7 Ti 0.1 O 1.85 . However, adding LiF to the precursors facilitates DRX phase formation during annealing and yields high purity DRX powders with the nominal compositions Li 1.25 Mn 0.5 Ti 0.3 O 1.95 F 0.05 and Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 . In situ X-ray diffraction was employed to study the synthesis process, revealing DRX begins to form at just 600 °C, which is much lower than traditional solid-state routes. Furthermore, electrochemical tests on the Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 cathode reveal these materials attain excellent performance with initial reversible capacities up to 215 mA h g –1 and stable cycling performance. These promising results demonstrate that combustion synthesis is a viable method for the scale-up of DRX materials. This research was conducted at Oak Ridge National Laboratory, managed by UT Battelle, LLC, for the U.S. Department of Energy (DOE) and was sponsored by the Vehicle Technologies Office (VTO) under the Office of Energy Efficiency and Renewable Energy (EERE). Some measurements were conducted at the Center for Nanophase Materials Sciences (CNMS), which is a DOE Office of Science User Facility.

An Experimental Approach to Assess Fluorine Incorporation into Disordered Rock Salt Oxide Cathodes

Understanding the Conversion Mechanism and Performance of Monodisperse FeF2 Nanocrystal Cathodes

The Limited Incorporation and Role of Fluorine in Mn-rich Disordered Rocksalt Cathodes

Direct Mapping of Fluorine in Cation Disordered Rocksalt Cathodes

Fluorination‐Enhanced Surface Stability of Disordered Rocksalt Cathodes

Monodisperse FeF2 Nanorods in Ionic Liquid Electrolytes: A Comprehensive Study of the Conversion Mechanism

A Fluorination Method for Improving Cation‐Disordered Rocksalt Cathode Performance

Effect of Fluorination on Lithium Transport and Short‐Range Order in Disordered‐Rocksalt‐Type Lithium‐Ion Battery Cathodes

Fluorination of Lithium‐Excess Transition Metal Oxide Cathode Materials

Reversible cationic-anionic redox in disordered rocksalt cathodes enabled by fluorination-induced integrated structure design

Exploring the Properties of Disordered Rocksalt Battery Cathode Materials by Advanced Characterization

The Intercalation Chemistry of the Disordered RockSalt Li3V2O5 Anode from Cluster Expansions and Machine Learning Interatomic Potentials

Unlocking Fast Li-ion Transport in Micrometer-Sized Mn-based Cation-Disordered Rocksalt Cathodes

The Mechanism of Fluorine Doping for the Enhanced Lithium Storage Behavior in Cation‐Disordered Cathode Oxide

Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes Enabled by a Graphite Conductive Additive

Morphology Control to Enable High Capacity Li-Rich Disordered Rock Salt Cathodes

Structural Evolution in Disordered Rock Salt Cathodes

Redox Engineering of Fe‐Rich Disordered Rock‐Salt Li‐Ion Cathode Materials

Structural regulation-induced Li-electron disentanglement for stabilized oxygen redox of Li-excess disordered rock-salt cathode materials

Improving Ruddlesden-Popper Electrocatalysts Through Interstitial Fluorination-Driven Rearrangements of Local Coordination Environment

Exploring a New, Scalable Synthesis Route to Disordered Rock Salt (DRX) Cathode Materials