Abstract:The global demand for lithium-ion batteries (LIBs) is ever-increasing as many nations seek to achieve a net carbon neutrality by the late 2030s. LiNi x Mn y Co 1– x – y O 2 , (NMC) is one of the most widely-used Li-ion cathode active materials. Despite its excellent performance (e.g., reversible capacities up to ~220 mA h g –1 and 500+ cycles), NMC contains both Ni and Co, which are expensive and have vulnerable supply chains. Li-excess disordered rock salt (DRX) materials are promising new cathode materials that utilize earth-abundant transition metals such as Mn and Ti. Through a combination of cationic and anionic charge compensation, DRX materials can attain specific energies ≥700 Wh kg –1 . Doping F – into the DRX structure (Li 1+ x Mn y Ti 2–1– x – y O 2– z F z ) has been reported to improve the material’s cycling stability. Despite their promising properties, most DRX cathodes are prepared through solid-state synthesis routes which require high-energy milling, provide little-to-no control over the particle morphology, and are difficult to scale. In this work, we developed a scalable combustion synthesis route (the glycine nitrate process) to produce high purity, high performance DRX cathodes. More specifically, we prepared two DRX precursors with nominal compositions of Li 1.2 Mn 0.5 Ti 0.3 O 1.95 and Li 1.2 Mn 0.7 Ti 0.1 O 1.85 . When the precursors were heated under Ar to 1000 °C for 1 – 4 h, only 50% Li 1.2 Mn 0.5 Ti 0.3 O 1.95 adopted a DRX structure, and no DRX formed for Li 1.2 Mn 0.7 Ti 0.1 O 1.85 . However, adding LiF to the precursors facilitates DRX phase formation during annealing and yields high purity DRX powders with the nominal compositions Li 1.25 Mn 0.5 Ti 0.3 O 1.95 F 0.05 and Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 . In situ X-ray diffraction was employed to study the synthesis process, revealing DRX begins to form at just 600 °C, which is much lower than traditional solid-state routes. Furthermore, electrochemical tests on the Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 cathode reveal these materials attain excellent performance with initial reversible capacities up to 215 mA h g –1 and stable cycling performance. These promising results demonstrate that combustion synthesis is a viable method for the scale-up of DRX materials. This research was conducted at Oak Ridge National Laboratory, managed by UT Battelle, LLC, for the U.S. Department of Energy (DOE) and was sponsored by the Vehicle Technologies Office (VTO) under the Office of Energy Efficiency and Renewable Energy (EERE). Some measurements were conducted at the Center for Nanophase Materials Sciences (CNMS), which is a DOE Office of Science User Facility.

Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes Enabled by a Graphite Conductive Additive

Unlocking Fast Li-ion Transport in Micrometer-Sized Mn-based Cation-Disordered Rocksalt Cathodes

Alternate Synthesis Method for High‐Performance Manganese Rich Cation Disordered Rocksalt Cathodes

Review—Recent Progress of Lithium-Rich Cation Disordered Rocksalt Cathode for High Performance Lithium-Ion Batteries

Exploring the Properties of Disordered Rocksalt Battery Cathode Materials by Advanced Characterization

Design Principle of Disordered Rocksalt Type Overlithiated Anode for High Energy Density Batteries

Enhanced Li+ Diffusion and Lattice Oxygen Stability by the High Entropy Effect in Disordered‐Rocksalt Cathodes

Improved Cycling Performance of Cation-Disordered Rock-Salt Li1.2Ti0.4Mn0.4O2 Cathode through Mo-Doping and Al2O3-Coating

Reduced Potential Barrier of Sodium-Substituted Disordered Rocksalt Cathode for Oxygen Evolution Electrocatalysts

Redox Engineering of Fe‐Rich Disordered Rock‐Salt Li‐Ion Cathode Materials

The Intercalation Chemistry of the Disordered RockSalt Li3V2O5 Anode from Cluster Expansions and Machine Learning Interatomic Potentials

Integrated rocksalt–polyanion cathodes with excess lithium and stabilized cycling

Direct observation of the ultrafast formation of cation-disordered rocksalt oxides as regenerable cathodes for lithium-ion batteries

Over‐stoichiometric Metastabilization of Cation‐Disordered Rock Salts

A green aqueous binder to enhance the electrochemical performance of Li-rich disordered rock salt cathode material

Structural Evolution in Disordered Rock Salt Cathodes

Dialing in the Voltage Window: Reconciling Interfacial Degradation and Performance Decay for Cation-Disordered Rocksalt Cathodes

Nearly all-active-material cathodes free of nickel and cobalt for Li-ion batteries

Exploring a New, Scalable Synthesis Route to Disordered Rock Salt (DRX) Cathode Materials

Aqueous solution-based synthesis approach for carbon-disordered rocksalt composite cathode development and its limitations