Abstract:Glasses, which date back to about 2500 BC, originated in Mesopotamia and were later brought to Egypt in approximately 1450 BC. In contrast to the long-range order materials (crystalline materials), the atoms and molecules of glasses, which are noncrystalline materials (short-range order) are not organized in a definite lattice pattern. Metallic glassy materials with amorphous structure, which are rather new members of the advanced materials family, were discovered in 1960. Due to their amorphous structure, metallic glassy alloys, particularly in the supercooled liquid region, behave differently when compared with crystalline alloys. They reveal unique and unusual mechanical, physical, and chemical characteristics that make them desirable materials for many advanced applications. Although metallic glasses can be produced using different techniques, many of these methods cannot be utilized to produce amorphous alloys when the system has high-melting temperature alloys (above 1500 °C) and/or is immiscible. As a result, such constraints may limit the ability to fabricate high-thermal stable metallic glassy families. The purpose of this research is to fabricate metallic glassy (Zr70Ni25Al5)100-xWx (x; 0, 2, 10, 20, and 35 at. %) by cold rolling the constituent powders and then mechanically alloying them in a high-energy ball mill. The as-prepared metallic glassy powders demonstrated high-thermal stability and glass forming ability, as evidenced by a broad supercooled liquid region and a high crystallization temperature. The glassy powders were then consolidated into full-dense bulk metallic glasses using a spark plasma sintering technique. This consolidation method did not result in the crystallization of the materials, as the consolidated buttons retained their short-range order fashion. Additionally, the current work demonstrated the capability of fabricating very large bulk metallic glassy buttons with diameters ranging from 20 to 50 mm. The results indicated that the microhardness of the synthesized metallic glassy alloys increased as the W concentration increased. As far as the authors are aware, this is the first time this metallic glassy system has been reported.

Mechanosynthesized and ultra-fast quenched AgI–Ag2O–B2O3 materials with high AgI contents

STUDY OF PREPARATION AND PROPERTIES OF NANO-SCALE AgI- POROUS SiO2 COMPOSITES

Influence of quenching rate on the crystallization behaviors of Mg63Ni22Pr15 metallic glass

Performance research and engineering application of B2O3-Bi2O3-ZnO glass powder for solidifying iodine-containing silver silica gel

Sintering Bi2O3–B2O3–ZnO Ternary Low Temperature Glass by Hydration Device to Solidify Iodine Containing Silver-Coated Silica Gel

In situ synthesis of AgI on the nanosilica surface for potential application as a cloud seeding material

Direct Immobilization of Iodine-Loaded Silver-Coated Silica Gel with Silicate Glass Powders at Low Temperature

Preparation and investigation of high purity Ge–Te–AgI glasses for optical application

Stabilization of Ultra-Small [ag2]2+ and [agm]n+ Nano-Clusters Through Negatively Charged Tetrahedrons in Oxyfluoride Glass Networks: to Largely Enhance the Luminescence Quantum Yields.

Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders

Low-sintering-temperature borosilicate glass to immobilize silver-coated silica-gel with different iodine loadings

Controllable Precipitation and Dissolution of Silver Nanoparticles in Ultrafast Laser Pulses Irradiated Ag+-doped Phosphate Glass.

Synthesis and characterization of AgI thin films at low temperature

Sintering of a Crystallizable CaO‐B2O3‐SiO2 Glass with Silver

Preparation, physical, optical, ESR and γ-ray attenuation efficacy investigation of copper oxide/silver borosilicate glass

Immobilization of silver-coated silica gel with varying iodine loading in silicate glass ceramics

Size-controlled stabilization of the superionic phase to room temperature in polymer-coated AgI nanoparticles

Phase Transformations from Nanocrystalline to Amorphous (Zr70Ni25Al5)100-xWx (x; 0, 2, 10, 20, 35 at. %) and Subsequent Consolidation

Isothermal Stability and Selected Mechanical Properties of Zr48Cu36Al8Ag8 Bulk Metallic Glass

Irradiation-induced Ag nanocluster nucleation in silicate glasses: Analogy with photography

Microstructure-mechanical properties of Ag0/Au0 doped K-Mg-Al-Si-O-F glass-ceramics