Abstract:Superhydrophobic surfaces (SHSs) and slippery lubricant infused porous surfaces (SLIPSs) are receiving increasing attention for their excellent anti-icing, anti-fogging, self-cleaning and condensation heat transfer properties. The ability of such surfaces to passively shed and repel water is mainly due to the low-adhesion between the liquid and the solid surface, i.e., low contact angle hysteresis, when compared to hydrophilic or to hydrophobic surfaces. In this work we investigated the effect of surface structure on the condensation performance on SHSs and SLIPSs. Three different SHSs with structures varying from the micro- to the nano-scale were fabricated following easy and scalable etching and oxidation growth procedures. The condensation performance on such surfaces was evaluated by optical microscopy in a temperature and humidity controlled environmental chamber. On SHSs important differences on the size and on the number of the coalescing droplets required for the jump to ensue were found when varying the surface structure underneath the condensing droplets. A surface energy analysis is proposed to account for the suppression of the droplet jumping performance in the presence of microstructures. On other hand, by impregnating the same SHSs with a low surface tension oil, i.e., SLIPSs, the adhesion between the condensate and the SLIPSs can be further reduced. On SLIPSs slight differences on the droplet density over time and shedding performance upon the inclusion of microstructures were observed. Droplets were found to shed faster and with smaller diameters on SLIPSs in the presence of microstructures when compared to solely nanostructured SLIPSs.We conclude that on SHSs the droplet-jumping performance of micrometer droplets is deteriorated in the presence of microstructures with the consequent decrease in the heat transfer performance, whereas on SLIPSs the droplet self removal is actually improved in the presence of microstructures.

Ultra-Slippery Hydrophilic Surfaces by Hybrid Monolayers

Universal and Stable Slippery Coatings: Chemical Combination Induced Adhesive-Lubricant Cooperation

A Novel Ultra‐hydrophobic Surface: Statically Non‐wetting but Dynamically Non‐sliding

Investigation and Application of an Ultrahydrophobic Hybrid-Structured Surface with Anti-Sticking Character

Covalently Attached Liquids: Instant Omniphobic Surfaces with Unprecedented Repellency

Effect of Hierarchical Structure on Slippery Lubricant Infused Porous Surfaces SLIPSs

Molecular origin of slippery behaviour in tethered liquid layers

Micro-nano-engineered slippery liquid-infused porous surface coating with highly sustainable superhydrophobicity and omniphobicity

Effect of Microstructures on Superhydrophobic and Slippery Lubricant-Infused Porous Surfaces During Condensation Phase Change

Omniphobic Slippery Coatings Based on Lubricant-Infused Porous Polyelectrolyte Multilayers

Robust Superhydrophobic Surfaces via the Sand-In Method

Antiwetting and Antifouling Performances of Different Lubricant-Infused Slippery Surfaces.

Di-particles-derived Slippery Lubricant-Infused Porous Surface with Broad Anti-Adhesion Performance

Ultraslippery Surface for Efficient Fog Harvesting and Anti-Icing/Fouling

Super-Hydrophobic PDMS Surface with Ultra-Low Adhesive Force

Underwater Superoleophobic Surface Based on Silica Hierarchical Cylinder Arrays with a Low Aspect Ratio

Uniting Superhydrophobic, Superoleophobic and Lubricating Fluid Infused Slippery Behavior on Copper Oxide Nano-structured Substrates

A Facile All-Solution-Processed Surface with High Water Contact Angle and High Water Adhesive Force

Ultrahigh Subcooling Dropwise Condensation Heat Transfer on Slippery Liquid-like Monolayer Grafted Surfaces

A Superhydrophobicity-Slipperiness Switchable Surface with Magneto- and Thermo-responsive Wires for Repelling Complex Droplets

Transparent PDMS Surfaces with Covalently Attached Lubricants for Enhanced Anti-adhesion Performance