A High 6318-PPI Pixel Circuit That Realizes 10-bit Gray Levels for Analog-PWM Driven Micro-LED Displays

Shih-Song Cheng,Paul C.-P. Chao
DOI: https://doi.org/10.1109/ted.2023.3347183
IF: 3.1
2024-02-02
IEEE Transactions on Electron Devices
Abstract:A new pixel circuit is proposed to realize 10-bit gray levels for high 6318 pixel-per-inch (PPI) micro-light-emitting-diode (micro-LED) displays, with a ramping voltage varied from high to low, outputting a pulse-form pixel current ( , while the pulsewidth of this can be modulated with two data voltages ( 's). The first is inputted and varies along the main 7-bit emitted grays, and the extra 3-bit gray levels are expanded as the second joins on the basis of the original 7-bit. Therefore, these 10-bit grays with the maximum 7-bit are realized in a smaller range ( as opposed to a conventional 10 bit obtained with a 10-bit . The proposed circuit was fabricated in the pixel array of 6318PPI via the 55-nm CMOS process. The actual of 0.635 V allows this circuit to be able to majorly constructed by the 1.2-V low-voltage field-effect transistor (LVFET), differing from the conventional 10-bit that is realized in of above 5 V by all high-voltage FET (HVFET)-made pixel circuits, that is, the circuit composition of LVFET substituting for HVFET is in favor of the layout shrinking of a pixel, offered the advantage of this technique on high PPI. Based on the experiments, the gamma-corrected 8-bit trimmed from the outputted 10-bit grays shows a favorable result that the obtained gamma distributes within 1.99 and 2.26 with standard deviation of 0.03, successfully validating the proposed high PPI pixel circuit for realizing 10-bit gray levels.
engineering, electrical & electronic,physics, applied
What problem does this paper attempt to address?