Apparatus and method for measuring individual color-matching functions

Luvin Munish Ragoo,Ivar Farup,Jan Henrik Wold

DOI: https://doi.org/10.1364/oe.536643

IF: 3.8

2024-10-30

Optics Express

Abstract:Luvin Munish Ragoo, Ivar Farup, Jan Henrik Wold This article presents a compact visual colorimeter for the purpose of measuring color-matching functions (CMFs) of individual observers ... [Opt. Express 32, 41127-41155 (2024)]

optics

What problem does this paper attempt to address?

A Multispectral Imaging Approach to Colour Measurement and Colour Matching of Single Yarns Without Winding

Lin Luo,Hui-Liang Shen,Si-Jie Shao,John H. Xin

DOI: https://doi.org/10.1111/cote.12162

2015-01-01

Coloration Technology

Abstract:This paper investigates a multispectral imaging approach to colour measurement and colour matching of single yarns. The small size of a single yarn makes it impossible for spectrophotometers directly to acquire its spectral reflectance. Multispectral imaging systems, on the other hand, have the potential to measure the reflectance of single yarns as they can record both the spectral and the spatial information of a sample. A multispectral imaging system, namely imaging colour measurement, has been developed to conduct colour measurement of single yarns. A single yarn is first detected from backgrounds by a modified K‐means clustering method. The reflectance of the single yarn is then specified by an averaging method. Comparative experiments based on 100 pairs of single yarns and corresponding yarn windings show that the reflectance magnitude of a single yarn acquired by imaging colour measurement is smaller than that of corresponding yarn winding measured by a Datacolor 650 spectrophotometer. Experiments on 16 single yarns show that the repeatability and spatial reproducibility of the imaging colour measurement system in measuring a single yarn colour are 0.1185 and 0.2827 CMC(2:1) units. A colour matching comparison experiment (pass or fail), using 24 pairs of single yarns and corresponding pairs of solid‐colour yarn dyed fabrics, shows that single yarns measured by imaging colour measurement can achieve similar colour matching results to solid‐colour yarn dyed fabrics measured by the Datacolor 650 spectrophotometer, with degrees of similarity of 87.5 and 83.3% when the CMC(2:1) and CIE2000(2:1:1) colour difference formulas are employed.
Colorimetric Characterization of Scanner by Measures of Perceptual Color Error.

Hui-Liang Shen,Tong-Sheng Mon,John H. Xin

DOI: https://doi.org/10.1117/1.2199872

IF: 0.829

2006-01-01

Journal of Electronic Imaging

Abstract:Two methods for coldrimetric characterization of color scanner are proposed based on the measures of perceptual color difference error. The first method is used to minimize the total color differences between the actual and predicted color samples. The second one, which is a generalization of the existing cubic-root preprocessing technique, derives the mapping between the p'th root of scanner responses and Commission Internationale de l'Eclairage L*a*b* (CIELAB) values. The experiment results indicate that the color accuracies of the proposed methods, especially the second one, are better than those of the traditional CIE XYZ (CIEXYZ)-space-based characterization methods. (c) 2006 SPIE and IS&T.
Colour Matching Comparison Between Spectrophotometric and Multispectral Imaging Measurements

Lin Luo,Hui-Liang Shen,Si-Jie Shao,John H. Xin

DOI: https://doi.org/10.1111/cote.12191

2016-01-01

Coloration Technology

Abstract:This paper compares colour matching of yarn‐dyed fabrics by spectrophotometric and multispectral imaging techniques. While it is well known that multispectral imaging systems can measure the colour of fabrics that cannot be acquired by spectrophotometers, comparison of these two types of instrument has not yet been well explored. Colour measurements of 44 pairs of standard and batch solid‐colour yarn‐dyed fabrics by means of a Datacolor 650 spectrophotometer and an imaging colour measurement (ICM) multispectral imaging system were compared. Experimental results show that the ICM system has the capability to measure similar hue a* differences and larger lightness L* and hue b* differences than the Datacolor 650 spectrophotometer. When the tolerance of colour matching is set to 1.0 CMC(2:1) (colour difference) unit, the ICM system can achieve the same colour matching results as the Datacolor 650 spectrophotometer, except for two dark samples.
Colour Matching Results from Two Distinct Observers Via a Visual Trichromator System

Keyu Shi,Ming Ronnier Luo,Tingwei Huang,Jianlong Zhang

DOI: https://doi.org/10.1007/978-981-19-9024-3_2

2023-01-01

Abstract:Human colour vision is represented by Colour Matching Function (CMF). A colour matching experiment based upon Maxwell's matching method was performed. Avisual trichromator based on spectrum tunable LED system consisting of control panelswas built. The fixed "standard" half-fieldwas white, while the "test" half-field was illuminated by three standard primaries one of which was replaced by a spectrally offset primary. The results from two distinct observers were reported in terms of inter- and intra-observer variations, 95% perception ellipses and individual CMFs.
Adaptation and Colour Matching of Display and Surface Colours

Boris Oicherman,M. Ronnier Luo,Brian Rigg,Alan R. Robertson

DOI: https://doi.org/10.1002/col.20492

2009-01-01

Abstract:In an asymmetric colour matching experiment, eleven observers adjusted computer displays to colour-match surface samples in a viewing booth. We found systematic discrepancies between the observers' judgments and the predictions of the CIE 1964 Standard Colorimetric Observer. The features of the discrepancies are consistent with previous reports on adaptation in colour matching and on failures of colorimetric additivity, but have never been confirmed to be significant in practical colorimetry. We attribute the discrepancies to post-receptoral adaptation mainly of the blue-yellow chromatic channel, and report a framework of an adaptation transform based on the MacLeod-Boynton chromaticity diagram which can compensate for them without abandoning traditional colorimetry and the use of tristimulus values. (C) 2009 Wiley Periodicals, Inc. Col Res Appl, 34, 182-193, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20492
The Llab Model For Colour Appearance And Colour Difference Evaluation

Mr Luo

DOI: https://doi.org/10.1117/12.236975

1996-01-01

Abstract:An ideal system of colorimetry should provide measures agreeing to what we see in three respects: color specification, difference and appearance. A successful method to quantify these measures depends upon the reliability of psychophysical experimental data. These data sets have been accumulated and were used to derive the LLAB model. The model includes two parts: a chromatic adaptation transform and a uniform color space. Tristimulus values under a particular set of illuminant/observer conditions are transformed to those of D65/2 degree(s) conditions via a chromatic adaptation transform. A modified version of CIELAB is then used to calculate six perceived attributes: lightness (LL), redness-greenness (AL), yellowness-blueness (BL), colorfulness (CL), hue angle (hL) and hue composition (HL). The model gives similar degree of prediction in comparison with the other state of the art models using the accumulated data sets. The LLAB model demonstrates that it is possible to achieve a system, which provides precise measures to quantify color match, difference and appearance.
Impact of Color-Matching Primaries on Observer Matching: Part I – Accuracy

Jiaye Li,Peter Hanselaer,Kevin A. G. Smet

DOI: https://doi.org/10.1080/15502724.2020.1864395

2021-02-17

Abstract:A good color description starts with the availability of accurate color-matching functions (CMFs) or cone fundamentals (CF). Recent work indicates a discrepancy between visual metamers and those calculated using the standard CIE CMFs or other CMF sets, especially for narrowband sources. In the current study, 54 observers (varying in age, gender, ethnicity, and eye color) performed a series of achromatic color-matching experiments with a 10° stimulus using eight different narrowband primaries under an immersive, perceptually neutral (4673 K) viewing conditions. The reference stimulus was provided by a 70 cd/m2 gray (4613 K) card illuminated by a spectrally broadband light source. The results confirm that substantial and significant differences between experimental and calculated metamers exist, particularly when a short wavelength primary (404 nm) is included and especially for the CIE 1931 2° CMFs. It is found that the primary set characterized by the peak wavelengths 636 nm, 521 nm, and 447 nm, which are close to those of typical RGB primaries widely used in industry, results in the most stable matching performance across all CMF sets. Finally, in addition to the impact of primary wavelength and CMF set, the potential effect of age, gender, ethnicity, and eye color has also been investigated. The effect of age on the color matches is found to be significant and is due to differences in spectral sensitivity of young and old observers with respect to the blue primary; the impact of observer gender, ethnicity, and eye color, on color-matching accuracy is not significant.

construction & building technology,optics
The Uncertainty of Colour-Matching Data.

B Oicherman,R Luo,A Tarrant,A Robertson

DOI: https://doi.org/10.2352/cic.2005.13.1.art00063

2005-01-01

Abstract:A colour matching experiment of the maximum-saturation type has been conducted on a group of five observers. The sources of uncertainty in its outcomes were identified and analysed. The variability introduced by the instrumentation was found to make a significant contribution to the total data variation for a single observer. Variability for a single observer, in its turn, contributes significantly to the overall observer-related variability. The CIE Standard Deviate Observer significantly underestimates the variability of colour matching according our study. The choice of the primary lights has an effect on the variability of colour matching. The results generally agree with previous findings by other researchers, although there are some differences in detail.
Corresponding-colour Datasets

MR Luo,PA Rhodes

DOI: https://doi.org/10.1002/(sici)1520-6378(199908)24:4<295::aid-col10>3.3.co;2-b

IF: 1.668

1999-01-01

Color Research & Application

Abstract:Color Research & ApplicationVolume 24, Issue 4 p. 295-296 COMMUNICATIONS AND COMMENTS Corresponding-colour datasets M. Ronnier Luo, M. Ronnier Luo Colour & Imaging Institute, University of Derby, EnglandSearch for more papers by this authorPeter A. Rhodes, Peter A. Rhodes Colour & Imaging Institute, University of Derby, EnglandSearch for more papers by this author M. Ronnier Luo, M. Ronnier Luo Colour & Imaging Institute, University of Derby, EnglandSearch for more papers by this authorPeter A. Rhodes, Peter A. Rhodes Colour & Imaging Institute, University of Derby, EnglandSearch for more papers by this author First published: 17 June 1999 https://doi.org/10.1002/(SICI)1520-6378(199908)24:4<295::AID-COL10>3.0.CO;2-KCitations: 17AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL No abstract is available for this article. References 1 Luo MR, Hunt RWG. Testing colour-appearance models using corresponding-colour and magnitude-estimation datasets. Col Res Appl 1998; 23: 147– 153. 2 Luo MR, Hunt RWG. The structure of the CIE1997 colour appearance model (CIECAM97). Col Res Appl 1998; 23: 138– 146. 3 Luo MR, Hunt RWG. A chromatic adaptation transform and a colour inconstancy index. Col Res Appl 1998; 23: 154– 158. 4 Mori L, Sobagaki H, Komatsubara H, Ikeda K. Field trials on CIE chromatic adaptation formula. Proc CIE 22nd Session; 1991. p 55– 58. 5 Helson H, Judd DB, Warren MH. Object-color changes from daylight to incandescent filament illumination. Illum Eng 1952; 47: 221– 233. 6 Lam KM. Metamerism and colour constancy. Ph. D. thesis, Univ Bradford, 1985. 7 Luo MR, Clarke AA, Rhodes PA, Scrivener SAR, Schappo A, Tait CJ. Quantifying colour appearance. Part I. LUTCHI colour appearance data. Col Res Appl 1991; 16: 166– 180. 8 Kuo WG, Luo MR, Bez H. Various chromatic-adaptation transforms tested using new colour appearance data in textiles. Col Res Appl 1995; 20: 313– 327. 9 Breneman EJ. Corresponding chromaticities for different states of adaptation to complex visual fields. J Opt Soc Am 1987; 4: 1115– 1129. 10 McCann JJ, McKees P, Taylor TH. Quantitative studies in retinex theory. Vision Res 1976; 16: 445– 458. 11 Braun KM, Fairchild MD. Psychophysical generation of matching images for cross-media color reproduction. In: IS&T and SID's 4th Col Imag Conf, Springfield, Va.: IS&T; 1996. p 214– 220. 12 Nayatani Y, Takahama K, Sobagaki H. Prediction of color appearance of object colors in a complex visual field. J Light & Vis Env 1995; 19: 5– 14. Citing Literature Volume24, Issue4August 1999Pages 295-296 ReferencesRelatedInformation
Observer metamerism and colorimetric additivity failures in soft-proofing.

Boris Oicherman,M. Ronnier Luo,Alan R. Robertson

DOI: https://doi.org/10.2352/cic.2006.14.1.art00006

2006-01-01

Abstract:Eleven observers made colour matches between LCD and CRT monitors and paint samples in viewing conditions similar to those of soft-proofing. The matches were used to evaluate the practical significance of observer metamerism and of failures of colorimetric additivity in cross-media colour matching.The individual variations in matches are of magnitudes that are expected to have practical consequences in graphic arts applications; they can not be explained by observer metamerism and thus can not be modelled by the Standard Deviate Observer. At the other hand, these variations are modelled well by the CIEDE2000 colour difference formula.Failures of colorimetric additivity lead to systematic disagreements in cross-media matches made by individual observers and predicted by the CIE 1964 Standard Colorimetric Observer. The discrepancies are consistent with all the reports on the subject, but have never been confirmed to exist in practical colorimetry. A chromatic adaptation modelling framework can be used to compensate for the failures in practical applications.We conclude that additivity failure is a significant contributor to the uncertainty of colour matching, and needs to be accounted for in industrial colour management systems. The practical implications of individual variability which is not the result of observer metamerism remains unclear.
Effect of observer metamerism on colour matching of display and surface colours

Boris Oicherman,M. Ronnier Luo,Bryan Rigg,Alan R. Robertson

DOI: https://doi.org/10.1002/col.20429

2008-01-01

Abstract:We studied the individual variability of asymmetric metameric colour matching between computer displays and object colour stimuli in conditions typical for the surface colour industries. Using two different computational techniques. we assessed the contribution of observer metamerism to this variability. It? the studied conditions of spatially separated computer display and surface colour stimuli, this contribution was found to be insignificant for all colours but neutrals. In the chromaticness plane, the range of matches made by different observers practically coincides with the range of matches made by at? individual observer. Consequently, we conclude that it? the task of matching spatially separated display and surface colours, the range of matches made by a group of observers cannot be determined from variations it? their colour-matching funtions, and thus the paradigm of the Standard Deviate Observer is shown to be inapplicable to the studied conditions. We suggest that individual variability in these conditions is governed by mechanisms of chromatic discrimination, and can be modeled by advanced colour difference formulae with suitably adjusted parametric coefficients. (C) 2008 Wiley Periodicals, Inc.
A multi‐primary trichromator to derive individual color matching functions and cone spectral sensitivities

Keyu Shi,Ming Ronnier Luo,Andrew T. Rider,Tingwei Huang,Lihao Xu,Andrew Stockman

DOI: https://doi.org/10.1002/col.22928

IF: 1.668

2024-03-31

Color Research & Application

Abstract:A multi‐primary trichromator was utilized to obtain individual color matching functions and cone spectral sensitivities, observers were tasked with completing five identical experiments using this device, and the resulting data will be compared with CIEPO06. Measuring color matching differences between observers is an important means of investigating individual differences in human color vision. In this article, we introduce a new LED‐based visual trichromator with which we have estimated color matching functions and cone spectral sensitivities in a group of five normal observers. The trichromator has side‐by‐side semi‐circular matching fields that are illuminated by two spectrally tunable LED light sources, each comprised of 18 LEDs with center wavelengths ranging from 400 to 700 nm. We used Maxwell's method to derive a set color match. A fixed triplet of red‐green‐blue (RGB) primaries produced the white standard field of 120 cd/m2 in one field. The other field, the mixture field, was illuminated by one of 11 different triplets of lights with various center wavelengths. Observers adjusted the intensities of the triplets in the mixture field to match the white standard field. All matches were made for field diameters of 2° and 10° of visual angle to allow comparisons with colorimetric standards and were repeated five times. Calibrations and tests showed that the trichromator and the measurements were stable and repeatable. Grassmann's laws predict that at the 11 color matches the excitations in the three cone types should be the same. Consequently, we can use those matches and a model of how cone spectral sensitivities vary between individuals to estimate the three underlying corneal cone spectral sensitivities for each observer (and thus how they vary from the standard (or mean) observer). We find good agreement with the CIE 2006 standards, but our observers show small but consistent differences.

imaging science & photographic technology,chemistry, applied,optics
Investigation of Parametric Colour Difference on Physical Size Effect for Sample Pairs with Separation

Qiang Xu,Changjun Li,Ming Ronnier Luo

DOI: https://doi.org/10.1007/978-981-19-9024-3_6

2023-01-01

Abstract:Present study investigates the use of 1931 and 1964 standard colorimetric observers in colorimetry. It was recommended by the CIE to apply them below and above 4 degrees field of view (FoV), respectively. An experiment was carried out to evaluate parametric colour difference on different physical sizes using a grey-scale method on a display. 280 sample pairs of display colours were assessed 20 times by 46 normal colour-vision observers (mean age 24 years). Sample pairs were selected surrounding the 5 CIE colour centres, having mean colour difference of 4 CIELAB units, with separation between two colours on a pair, having 4 physical sizes, 2 degrees, 4 degrees, 10 degrees and 20 degrees. The visual results were used to test the effects of different colour matching functions (CMFs) and colour difference equations. It was found that CIEDE2000 performed the best, followed by CAM16-UCS and CIELAB the worst. Finally, CIE 1931, CIE 1964, CIE 2006-2 degrees, CIE 2006-10 degrees and 2006-4 degrees CMFs had similar performance in calculating colour differences.
A Parametric Colour-difference Study on the Separation and CMF Effects.

Qiang Xu,Keyu Shi,Ming Ronnier Luo

DOI: https://doi.org/10.2352/cic.2022.30.1.09

2022-01-01

Abstract:An experiment was carried out to investigate separation and CMF effects on colour-difference evaluation using display colours. In total, 1120 sample pairs around 5 CIE recommended colour centres were assessed 20 times using the grey-scale method. Sample pairs were selected to have colour-difference of 4 and 8 CIELAB units, include or exclude separation between two colours on a pair, have four fields of view (FoVs), 2º, 4º, 10º and 20º. The experiment results were used to test 3 colour-difference equations or uniform colour spaces, CIELAB, CIEDE2000 and CAM16-UCS. For separation (S) sample pairs, CIEDE2000 performed the best, followed by CAM16-UCS and CIELAB the worst. For no-separation (NS) sample pairs, all models gave worse performance than separation (S) sample pairs. The parametric formula derived earlier was verified to predict colour-difference for sample pairs to have no-separation line. Five colour matching functions (CMFs), CIE 1931, CIE 1964, CIE 2006-2º, CIE 2006-10º and 2006-4º were tested and the results indicated very small CMF effect on calculating colour-difference.
Impact of Color Matching Primaries on Observer Matching: Part II – Observer Variability

Jiaye Li,Peter Hanselaer,Kevin A. G. Smet

DOI: https://doi.org/10.1080/15502724.2020.1864396

2021-02-25

Abstract:In this study, the observer variability in a 10° achromatic color matching experiment using systematically different primaries under immersive, perceptually neutral (4673 K) and stable adapted viewing conditions have been investigated for four different sets of CIE color matching functions (CMFs). The matching reference was illuminated by a spectrally broadband light source at 70 cd/m2 and 4613 K. Fifty-four observers varying in age, gender, ethnicity and eye color participated. The results indicate that certain wavelength regions are more sensitive to generate interobserver variability, such as when a short wavelength primary (404 nm) was applied. Furthermore, of the primary sets investigated, that with peak-wavelengths (636–521–447 nm) close to the "typical" RGB-primaries widely known and used in industry had the smallest interobserver variability. In addition to the significant effect of primary set and CMF set, a significant effect of age on matching variability is also found, whereby the change of the blue primary resulted in a substantial difference in dispersion between younger and older observers, likely caused by age-induced yellowing of the lens. Furthermore, different primary sets tend to have a different impact on intra-observer variability than on interobserver variability. Finally, by comparing the observer variability in the current work with previous studies, the CIE standard deviate observer is found to substantially underestimate the interobserver variability, especially for the primary sets containing a 404 nm LED. Our observers also tend to have similar to smaller inter-variability than those reported in literature, possibly due to methodological differences.

construction & building technology,optics
Development of the Ies Method for Evaluating the Color Rendition of Light Sources

Aurelien David,Paul T. Fini,Kevin W. Houser,Yoshi Ohno,Michael P. Royer,Kevin A. G. Smet,Minchen Wei,Lorne Whitehead

DOI: https://doi.org/10.1364/oe.23.015888

IF: 3.8

2015-01-01

Optics Express

Abstract:We have developed a two-measure system for evaluating light sources' color rendition that builds upon conceptual progress of numerous researchers over the last two decades. The system quantifies the color fidelity and color gamut (change in object chroma) of a light source in comparison to a reference illuminant. The calculations are based on a newly developed set of reflectance data from real samples uniformly distributed in color space (thereby fairly representing all colors) and in wavelength space (thereby precluding artificial optimization of the color rendition scores by spectral engineering). The color fidelity score R(f) is an improved version of the CIE color rendering index. The color gamut score R(g) is an improved version of the Gamut Area Index. In combination, they provide two complementary assessments to guide the optimization of future light sources. This method summarizes the findings of the Color Metric Task Group of the Illuminating Engineering Society of North America (IES). It is adopted in the upcoming IES TM-30-2015, and is proposed for consideration with the International Commission on Illumination (CIE).
Parametric Effects in Color-Difference Evaluation

Qiang Xu,Keyu Shi,Ming Ronnier Luo

DOI: https://doi.org/10.1364/oe.462628

IF: 3.8

2022-01-01

Optics Express

Abstract:An experiment was conducted to investigate three parameters affecting color-difference evaluation on a display: 4 sample sizes (2°, 4°, 10°, and 20°), 2 color-difference magnitudes (4 and 8 CIELAB units), and 2 separations (inclusion or exclusion of the separation line between two colors in a pair). Sample pairs surrounding 5 CIE recommended color centers were prepared. In total, 1120 sample pairs of colors were assessed 20 times using the grey-scale method. The experimental results were used to reveal various parametric effects and to verify the performance of different color matching functions (CMFs) and four color difference formulae and uniform color spaces. It was found that there was little difference in terms of ΔE values calculated using different CMFs for all the color models tested. A parametric formula was proposed to predict three parametric effects for sample pairs having no-separation line: 1) differences in sample size, 2) media (surface and self-luminous colors), and 3) color-difference magnitudes.
Deriving the cone fundamentals: a subspace intersection method

Brian A. Wandell,Thomas Goossens,David H. Brainard

DOI: https://doi.org/10.1101/2024.02.04.577470

2024-02-05

Abstract:Two ideas, proposed by Thomas Young and James Clerk Maxwell, form the foundations of color science: (1) Three types of retinal receptors encode light under daytime conditions, and (2) color matching experiments establish the critical spectral properties of this encoding. Experimental quantification of these ideas are used in international color standards. But, for many years the field did not reach consensus on the spectral properties of the biological substrate of color matching: the sensitivity of the (cone fundamentals). By combining auxiliary data (thresholds, inert pigment analyses), complex calculations, and color matching from genetically analyzed dichromats, the human cone fundamentals have now been standardized. Here we describe a new computational method to estimate the cone fundamentals using only color matching from dichromatic observers. We show that it is not necessary to include data from trichromatic observers in the analysis or to know the primary lights used in the matching experiments. Remarkably, it is even possible to estimate the fundamentals by combining data from experiments using different, unknown primaries. We then suggest how the new method may be applied to color management in modern image systems.

Neuroscience
Methods for Quantifying Metamerism. Part 2‐instrumental Methods

WG Kuo,MR Luo

DOI: https://doi.org/10.1111/j.1478-4408.1996.tb01773.x

1996-01-01

Journal of the Society of Dyers and Colourists

Abstract:This is the second part of this series of articles, in which the experimental data described in Part 1 are used to evaluate three types of metamerism indices. The results show that the index based upon one of the three advanced colour‐difference formulae (CMC, BFD, and CIE94) gave a quite satisfactory prediction to the visual results. The degree of precision from these formulae is equal to or higher than the typical observer precision found in this study. A set of colour‐matching functions was also derived. In comparison with those of the CIE 1964 standard colorimetric observer, the new set gives closer agreement with the visual results, particularly under source D65. This new set could be used for indicating the degree of observer metamerism. Another set of experimental data was also assessed. Similar tests were conducted and the results confirm the earlier findings. The advanced colour‐difference formulae can be confidently used for evaluating the degree of metamerism for industrial applications.

Apparatus and method for measuring individual color-matching functions

A Multispectral Imaging Approach to Colour Measurement and Colour Matching of Single Yarns Without Winding

Colorimetric Characterization of Scanner by Measures of Perceptual Color Error.

Colour Matching Comparison Between Spectrophotometric and Multispectral Imaging Measurements

Colour Matching Results from Two Distinct Observers Via a Visual Trichromator System

Adaptation and Colour Matching of Display and Surface Colours

The Llab Model For Colour Appearance And Colour Difference Evaluation

Impact of Color-Matching Primaries on Observer Matching: Part I – Accuracy

The Uncertainty of Colour-Matching Data.

Corresponding-colour Datasets

Observer metamerism and colorimetric additivity failures in soft-proofing.

Effect of observer metamerism on colour matching of display and surface colours

A multi‐primary trichromator to derive individual color matching functions and cone spectral sensitivities

Investigation of Parametric Colour Difference on Physical Size Effect for Sample Pairs with Separation

A Parametric Colour-difference Study on the Separation and CMF Effects.

Impact of Color Matching Primaries on Observer Matching: Part II – Observer Variability

Development of the Ies Method for Evaluating the Color Rendition of Light Sources

Parametric Effects in Color-Difference Evaluation

Deriving the cone fundamentals: a subspace intersection method

Methods for Quantifying Metamerism. Part 2‐instrumental Methods