Abstract:Photocurable polymer provides fast curable properties via ultraviolet (UV) light for 3D‐printed propellants. This work outlines the preparation and characterization of photocurable fluorinated polyether‐based reactive inks. Acrylate‐terminated poly‐2‐((2,2,3,3,3‐pentafluoropropoxy)‐methyl) ethylene oxide (P5F‐AA) was synthesized as photocurable binder through the esterification of acrylic acid, and the terminal hydroxyl group of poly‐2‐((2,2,3,3,3‐pentafluoropropoxy)‐methyl) ethylene oxide (P5F), which was synthesized through cationic ring‐opening polymerization of 2‐((2,2,3,3,3‐pentafluoropropoxy)methyl) oxy‐ethane (PFEE) by using butane diol as initiator. In comparison with P5F, P5F‐AA had a lower glass transition temperature (Tg) of −63.3°C. A new type of photocurable resin, which may be used for additive manufacturing of energetic materials, was prepared via UV radiation in an LED UV curing tank by using P5F‐AA as prepolymer, diphenyl (2,4,6‐trimethyl benzoyl) phosphine oxide (TPO) as photo‐initiator, and tri‐fluoroethyl acrylate (3F‐AA) and 1,6‐hexanediol diacrylate (HDDA) as mono‐ and multifunctional diluents, respectively. When the mass ratio of P5F‐AA/3F‐AA/HDDA binder matrix was 1:1:0.5, the sample exhibited maximal mechanical strength of 6.56 MPa with elongation at break of 13.38%, which was due to the introduction of HDDA effectively increasing the "entanglement" between molecular chains. Thermogravimetric analysis (TGA‐DTG) was utilized to evaluate the ability to decompose thermally of the binder matrix, and the results showed the initial degradation temperature started at nearly 181°C and two consecutive stages in thermal decomposition. Overall, the obtained results from the different techniques suggested that P5F‐AA/3F‐AA/HDDA binder matrix may be a photocurable reactive ink for 3D‐printed propellants, which would provide a certain reference value and guiding importance for design of reactive inks.

The three-component photoinitiating systems based on flavonol sulfonate and application in 3D printing

Efficient 3D Printing Via Photooxidation of Ketocoumarin Based Photopolymerization

Grayscale Color 3D/4D Printing Via Orthogonal Photochemistry

Bisbenzothieno[b]-fused BODIPYs in panchromatic photoinitiating for the free radical and cationic photopolymerization and application in 3D printing

Triphenylamine-substituted BODIPY dye based photoinitiators for free radical and cationic photopolymerization under visible LED irradiation and application in 3D printing

High-efficiency pentafluorostilbene-based photocatalysts dedicated to preparing fluorescent 3D printed polymer nanocomposites

Novel di-2-thienyl ketone derivatives photoinitiators enable fast visible light polymerization and 3D printing

Conjugated Bifunctional Carbazole-Based Oxime Esters: Efficient and Versatile Photoinitiators for 3D Printing under One- and Two-Photon Excitation

Synthesis and Characterization of Stereolithography 3D Printing Fluorescent Resin

A General Strategy for Sustainable 3D Printing Based on A Multifunctional Photoinitiator

Construction of Photoinitiator Functionalized Spherical Nanoparticles Enabling Favorable Photoinitiating Activity and Migration Resistance for 3D Printing.

Preparation and characterization of photocurable fluorinated polyether‐based reactive inks

Reconfigurable Polymer Networks for Digital Light Processing 3D Printing

Cleavable Unimolecular Photoinitiators Based on Oxime‐Ester Chemistry for Two‐Photon Three‐Dimensional Printing

Novel Benzophenone Derivatives for Low Intensity Visible Light Polymerization and Multi-Color 3D Printing

3D Printing/Vat Photopolymerization of Photopolymers Activated by Novel Organic Dyes as Photoinitiators

Novel Ketone Derivatives Involving Triphenylamine Electron-Donating Group As Low Migration Photoinitiators for Visible Light Radical Polymerization and 3D Printing

Photoinitiation behavior of phenothiazines containing two oxime ester functionalities (OXEs) in free radical photopolymerization and 3D printing application

Visible‐Light‐Driven Rapid 3D Printing of Photoresponsive Resins for Optically Clear Multifunctional 3D Objects (Adv. Mater. 19/2024)

Water-soluble bis-chalcone-based photoinitiators with long-wavelength absorption for radical polymerization and 3D printing

High-fidelity 3D Printing using Flashing Photopolymerization