Abstract:To fabricate efficient dye-sensitized solar cells (DSSCs), 4-tert-butylpyridine (TBP) is commonly used as an additive in the electrolytes for improving the photovoltages (VOC). However, TBP cannot play a positive role in improving the photocurrent (JSC) because of the lack of absorption in the visible-wavelength range. We herein report a light-absorbing pyridine derivative N1 as an additive for the axial coordination with porphyrin dyes. N1 was synthesized by introducing a (bis(4-methoxyphenyl)amino)anthryl moiety into the para-position of pyridine via an acetylene bridge, and porphyrin dye XW64 containing meso-3,5-disubstituted phenyl groups was synthesized considering that the meta-substituted phenyl groups may induce weaker steric hindrance with the axial pyridyl ligand, as compared with wrapped and strapped porphyrin dyes. Thus, N1 was used as an electrolyte additive together with TBP. When optimized concentrations of 6 mM N1 and 0.5 M TBP were used for fabricating DSSCs based on XW64, enhanced photovoltaic performance was achieved, with JSC, VOC, and efficiency of 15.65 mA·cm-2, 0.701 V, and 7.35%, respectively, superior to those of the corresponding DSSCs without using the additives (JSC = 14.86 mA·cm-2, VOC = 0.599 V, and efficiency = 5.94%). The enhancement of JSC can be ascribed to the improved light-harvesting ability induced by the axially coordinated N1. Furthermore, the two additives also can be used to fabricate efficient solar cells based on the wrapped porphyrin dye XW42, achieving high efficiency of 10.3%, indicative of their general applicability in fabricating high-performance DSSCs. These results indicate that the simultaneous employment of the traditional TBP additive and a pyridyl ligand with light-harvesting ability in the electrolyte for the axial coordination to a porphyrin dye is a promising approach for developing efficient DSSCs.

Investigation on the Coordination between Methylpyridine Additives with [Cu(dmp)2]2+/+ Redox Couple and Its Improvement to the Stability of the Dye-Sensitized Solar Cells

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Enhance the Performance of Co-Sensitized Solar Cell by a Series Efficient Pyridine-Anchor Co-Adsorbents of N,N′-bis((pyridin-2-yl)methylene)-p-phenylenediimine and a Ruthenium Dye of N719

Efficiency of Ruthenium Dye Sensitized Solar Cells Enhanced by 2,6-Bis[1-(phenylimino)ethyl]pyridine As a Co-Sensitizer Containing Methyl Substituents on Its Phenyl Rings.

N,N'-Bis((6-methoxylpyridin-2-yl)methylene)-p-phenylenediimine Based D(10) Transition Metal Complexes and Their Utilization in Co-Sensitized Solar Cells.

Photocurrent Enhancement by Employing 2,6-Bis[1-(2,4,6-trimethyl-phenylimino)ethyl]Pyridine as a Co-Sensitizer with Ruthenium in Dye Sensitized Solar Cell

The Effects of Pyridine Derivative Additives on Interface Processes at Nanocrystalline TiO2 Thin Film in Dye‐sensitized Solar Cells

High stability tetradentate ligand copper complexes and organic small molecule hybrid electrolyte for dye-sensitized solar cells

Shielding Effects Of Additives In A Cobalt(Ii/Iii) Redox Electrolyte: Toward Higher Open-Circuit Photovoltages In Dye-Sensitized Solar Cells

Theoretical exploration of copper based electrolytes for third generation dye sensitized solar cells

Co-sensitization promoted light harvesting with a new mixed-addenda polyoxometalate [Cu(C12H8N2)2]2[V2W4O19]·4H2O in dye-sensitized solar cells

Anion Effect on the CuII-Neocuproine Mediator and Its Electrocatalysts for Dye-Sensitized Solar Cells: Polymeric Chalcogenides of PEDOT-PEDTT and [Ag2(SePh)2]n

Efficient dye-sensitized solar cells based on bioinspired copper redox mediators by tailoring counterions

Alkyl effects on charge recombination in copper electrolyte-based dye-sensitized solar cells: Insights for targeted molecular design towards high performance

A Copper Coordination Polymer with Matching Energy Level for Modifying Hole Transport Layers to Improve the Performance of Perovskite Solar Cells.

Fine-Tuning by Triple Bond of Carbazole Derivative Dyes to Obtain High Efficiency for Dye-Sensitized Solar Cells with Copper Electrolyte

Light-Absorbing Pyridine Derivative As a New Electrolyte Additive for Developing Efficient Porphyrin Dye-Sensitized Solar Cells

D-A-π-A Organic Dyes with Fluorenyl-Substituted Bulky Donor for Efficient Dye-Sensitized Solar Cells

New Diketopyrrolopyrrole (dpp) Dyes for Efficient Dye-Sensitized Solar Cells

Phenanthrene‐Fused‐Quinoxaline As a Key Building Block for Highly Efficient and Stable Sensitizers in Copper‐Electrolyte‐Based Dye‐Sensitized Solar Cells