Abstract:The lift force is an important component that affects the aerodynamic performance of bio-inspired flapping-wing micro aerial vehicles. However, there is a lack of endeavors in the optimization of the flapping wing parameters that affect the lift force of micro aerial vehicles. This research is therefore to establish a methodology that combines computational fluid dynamic simulation for the evaluation of the lift generation and wing parameters. The Taguchi’s framework for design of experiments, combined with the computational fluid dynamics simulations, is performed on a simplified robotic fly wing model used in the experiment found in Dickinson et al. (1999), under the hovering flight mode, to identify the most influential parameters on the lift generation of micro aerial vehicles. A commercial computational fluid dynamics code, ANSYS/FLUENT, along with a three-dimensional Navier–Stokes solver is used to simulate the unsteady flow field. With the optimization of the time-averaged lift force as the optimization objective, five typical parameters (flapping frequency, maximum angle of attacks during the upstroke and downstroke motions, stroke amplitude, and rotation type) in the flapping trajectory equation are selected as the input factors with each having four levels. Specific computational fluid dynamics cases are simulated in accordance with the chosen orthogonal arrays. By conducting statistical analyses with analyses of means and variance, the flapping frequency and the stroke amplitude are determined to be the two most influential parameters. The response surface of the time-averaged lift force and the power consumption contour are constructed with respect to these two parameters to determine the optimal combination for the generation of lift forces under a specific power constrain and provide a guideline for bio-inspired micro aerial vehicle designs.

Influence of area distribution along the span direction on flapping wing aerodynamics in hover based on numerical modelling analysis

The Wing Kinematics Effects on Performance and Wake Structure Produced by Finite-Span Hovering Wings

Influences of Flapping Modes and Wing Kinematics on Aerodynamic Performance of Insect Hovering Flight

NUMERICAL STUDIES ON THE PROPULSION AND WAKE STRUCTURES OF FINITE-SPAN FLAPPING WINGS WITH DIFFERENT ASPECT RATIOS

Numerical Investigation on Aerodynamic Performance of a 2-D Inclined Hovering Wing in Asymmetric Strokes

Sensitivity Analysis of Wing Geometric and Kinematic Parameters for the Aerodynamic Performance of Hovering Flapping Wing

Effects of Stroke Deviation on Hovering Aerodynamic Performance of Flapping Wings

Numerical Simulation Of Flapping-Wing Insect Hovering Flight At Unsteady Flow

Aerodynamics of a Two-Dimensional Flapping Wing Hovering in Proximity of Ground

Optimization of Lift Force for a Bio-Inspired Flapping Wing Model in Hovering Flight

The evolution of vortices determines the aeroacoustics generated by a hovering wing

Effects of thickness and camber on aerodynamic performance of flapping wings during forward flight

Experimental Investigation on Aerodynamic Performance of Inclined Hovering with Asymmetric Wing Rotation

Study of high aerodynamic lift mechanics of hovering insect flapping wing at low Reynolds number

Numerical Investigation of Wingtip Aerodynamic Interference of Two Flapping Wings on Opposite Sides

Ground Effect of a Two-Dimensional Flapping Wing Hovering in Inclined Stroke Plane

Numerical Investigation on Flapping Aerodynamic Performance of Dragonfly Wings in Crosswind

Wake of a Bio-Inspired Flapping Wing with Morphing Wingspan

Optimal Settings of Aerodynamic Performance Parameters in Hovering Flight

Computational study on the hovering mechanisms of a chordwise flexible wing

Near Wake Vortex Dynamics of a Hovering Hawkmoth