Abstract:Rare earth elements (REEs) are recognized as one of the most critical elements and considered essential for the development of sustainable energy technologies, lasers, electronics, alloys, catalysts, and other applications. In order to meet the increasing demand to ensure those essential usages, the supply of REEs is however limited from the primary sources. Recovery of REEs from secondary resources, such as discarded electrical and electronic equipment, referred to as electronic waste (e-waste) is consequently crucial. Fluorescent lamps among such wastes are of special concern due to the high quantity of REEs present in them. This article discusses a potential hydrometallurgical method for recovering REEs (yttrium and europium) from fluorescent lamp waste via nitric acid leaching. The effects of leaching factors including acid concentration and temperature were examined. To assist the leaching yields of those metals, the effect of alkaline fusion was specifically examined. The kinetics of both processes, direct- and alkaline fusion-assisted leaching were investigated based on the shrinking core model. In the case of direct leaching, the metal dissolution was controlled by surface chemical reaction with apparent activation energies of 43.9 and 48.1 kJ/mol for yttrium and europium, respectively, in the temperature range 303–333 K. Pretreatment, viz., the alkaline fusion changed the subsequent leaching mechanism to diffusion control with apparent activation energies of 7.4 and 9.5 kJ/mol for the respective metal in the same temperature range. Optimization of the alkaline fusion-assisted acid leaching process was undertaken by applying response surface methodology (RSM) based on the central composite design (CCD). Under the alkaline fusion conditions such as soda/fluorescent powder mass ratio of 0.65 g/g, temperature of 1223 K and reaction time of 7200 s followed by acid leaching (nitric acid concentration – 3.5 M, temperature-323 K, pulp density – 30 g/L and leaching duration – 1200 s), the leaching efficiencies of 92.6% and 99.5% for yttrium and europium, respectively, could be achieved.

Supercritical fluid extraction of rare earth elements from luminescent material in waste fluorescent lamps

Studies on the Solvent Extraction of Rare Earth Metals from Fluorescent Lamp Waste Using Cyanex 923

Leaching of yttrium and europium from fluorescent lamp phosphor powder using nitric acid: kinetics and optimization

Rare Earth Elements Recovery from Waste Fluorescent Lamps: A Review

Recovery of rare earth element from waste cathode ray tube phosphors by concentrated sulfuric acid directional transformation-water leaching

Selective recovery of yttrium oxide and yttrium–europium oxide particles from fluorescent wastes by solvent extraction, precipitation, and calcination

Recovery of yttrium and europium from spent fluorescent lamps using pure levulinic acid and the deep eutectic solvent levulinic acid-choline chloride

Fast Extraction and Enrichment of Rare Earth Elements from Waste Water Via Microfluidic-Based Hollow Droplet

Rare Earth Metal Recovery from Typical E-Waste

Chelator-induced recovery of rare earths from end-of-life fluorescent lamps with the aid of mechano-chemical energy

Production of high purity rare earth mixture from iron-rich spent fluid catalytic cracking (FCC) catalyst using acid leaching and two-step solvent extraction process

Design of a Magnetic Field-Controlled Chromatography Process for Efficient and Selective Fractionation of Rare Earth Phosphors from End-of-Life Fluorescent Lamps

Recovery of rare earth elements from waste fluorescent phosphors: Na2O2 molten salt decomposition

Extraction of rare earth elements from their oxides using organophosphorus reagent complexes with HNO3 and H2O in supercritical CO2

Treatment of exhaust fluorescent lamps to recover yttrium: experimental and process analyses

Enhanced Recovery of Rare Earth Elements from Waste Phosphors by Mechanical Activation

Recovery of rare earth elements from spent fluid catalytic cracking catalysts using leaching and solvent extraction techniques

Optimization of intensified leaching and selective recovery of Y and Eu from waste cathode ray tube phosphor

Identification of lanthanum-specific peptides for future recycling of rare earth elements from compact fluorescent lamps

Redox Assisted Solvent Extraction to Enable Highly Efficient Separation of Cerium from Other Lanthanides: Experimental Studies and DFT Calculations

Rare earth elements recovery from secondary wastes by solid-state chlorination and selective organic leaching