Abstract:Rare earth elements (REEs) are recognized as one of the most critical elements and considered essential for the development of sustainable energy technologies, lasers, electronics, alloys, catalysts, and other applications. In order to meet the increasing demand to ensure those essential usages, the supply of REEs is however limited from the primary sources. Recovery of REEs from secondary resources, such as discarded electrical and electronic equipment, referred to as electronic waste (e-waste) is consequently crucial. Fluorescent lamps among such wastes are of special concern due to the high quantity of REEs present in them. This article discusses a potential hydrometallurgical method for recovering REEs (yttrium and europium) from fluorescent lamp waste via nitric acid leaching. The effects of leaching factors including acid concentration and temperature were examined. To assist the leaching yields of those metals, the effect of alkaline fusion was specifically examined. The kinetics of both processes, direct- and alkaline fusion-assisted leaching were investigated based on the shrinking core model. In the case of direct leaching, the metal dissolution was controlled by surface chemical reaction with apparent activation energies of 43.9 and 48.1 kJ/mol for yttrium and europium, respectively, in the temperature range 303–333 K. Pretreatment, viz., the alkaline fusion changed the subsequent leaching mechanism to diffusion control with apparent activation energies of 7.4 and 9.5 kJ/mol for the respective metal in the same temperature range. Optimization of the alkaline fusion-assisted acid leaching process was undertaken by applying response surface methodology (RSM) based on the central composite design (CCD). Under the alkaline fusion conditions such as soda/fluorescent powder mass ratio of 0.65 g/g, temperature of 1223 K and reaction time of 7200 s followed by acid leaching (nitric acid concentration – 3.5 M, temperature-323 K, pulp density – 30 g/L and leaching duration – 1200 s), the leaching efficiencies of 92.6% and 99.5% for yttrium and europium, respectively, could be achieved.

Enhanced Recovery of Rare Earth Elements from Waste Phosphors by Mechanical Activation

Innovative Application of Mechanical Activation for Rare Earth Elements Recovering: Process Optimization and Mechanism Exploration

Improvement in Rare Earth Element Recovery from Waste Trichromatic Phosphors by Mechanical Activation

Rare Earth Elements Recovery from Waste Fluorescent Lamps: A Review

Rare Earth Metal Recovery from Typical E-Waste

Chelator-induced recovery of rare earths from end-of-life fluorescent lamps with the aid of mechano-chemical energy

Optimization of intensified leaching and selective recovery of Y and Eu from waste cathode ray tube phosphor

Intelligent leaching rare earth elements from waste fluorescent lamps

Leaching of yttrium and europium from fluorescent lamp phosphor powder using nitric acid: kinetics and optimization

Rare earth elements recovery from secondary wastes by solid-state chlorination and selective organic leaching

Enhanced leaching recovery of rare earth elements from a phosphatic waste clay through calcination pretreatment

Rare earth elements from waste

Recovery of rare earth elements from waste fluorescent phosphors: Na2O2 molten salt decomposition

Efficient recovery of rare earth elements from discarded NdFeB magnets by mechanical activation coupled with acid leaching

A green process for selective REEs recovery from Rare earth waste through mechanochemical activation

Rare Earths’ Recovery from Phosphogypsum: An Overview on Direct and Indirect Leaching Techniques

Extraction of rare earth Eu from waste blue phosphor strengthened by microwave alkali roasting

Selective leaching of calcium from mechanically activated mixed rare earth concentrate

Recovery of rare earth elements from waste phosphors using phosphonic acid-functionalized silica adsorbent

Studies on the Solvent Extraction of Rare Earth Metals from Fluorescent Lamp Waste Using Cyanex 923

Rare Earth Elements Recovery and Waste Management of Municipal Solid Waste Incineration Ash