Abstract:The current available selective laser sintering (SLS) materials are often high in cost and limited in variety; the mechanical properties of wood-composite SLS parts are low quality, which restricts the development of SLS technology. This article aims to optimize the SLS processing parameters to enhance the mechanical properties of the Prosopis chilensis powder (PCP)/polyethersulfone (PES) composite (PCPC) part fabricated via SLS. The PCP and PES powder were proposed as the feedstock of the PCPC powder bed for SLS. First, the thermal decomposition and glass transition temperatures (Tg) of PCP and PES powder were estimated to reduce the produced PCPC parts from warping and deformation during SLS. An orthogonal experimental methodology with five factors and four levels was used to optimize the SLS parameters for the PCPC SLS test. The scanning speed, preheating temperature, and laser power are selected as the main affecting factors on this study. The influence of these factors on dimension accuracies, bending and tensile strengths, and surface roughness quality of the produced PCPC parts was studied. The PCPC particle distribution and microstructure were inspected via scanning electron microscopy. Furthermore, the synthesis weighted scoring methods were utilized to determine the optimal SLS processing parameters of the produced PCPC parts. The combined results of tests showed that the optimal SLS parameters were as follows: the scanning speed is 1.8 m/s, preheating temperature is 80°C, and the laser power is 12 W. Thus, the quality of PCPC SLS parts was significantly enhanced when the optimal parameters were utilized in the SLS process. This article provided the main reference values of SLS parameters of the PCPC. To further enhance the surface roughness quality and mechanical strengths, the postprocessing infiltration with wax was introduced; after wax infiltration, the surface roughness and mechanical strengths were significantly improved.

Preparation of high-porosity biomass-based carbon electrodes by selective laser sintering

Briefing: Selective laser sintering technology to print walnut shell/phenolic resin new biomass-based porous electrode

A novel process study of biomass-based graphene-enriched body based on selective laser sintering technology

Walnut shell/phenolic resin carbon electrodes via laser sintering and KOH activation

Preparation of carbon black/graphene nanosheets/PP composites with 3D separated conductive networks based on selective laser sintering

Microstructure and electrochemical properties of porous carbon derived from biomass

A Novel Fabrication Method of Carbon Electrodes Using 3D Printing and Chemical Modification Process.

Bioselective Synthesis of a Porous Carbon Collector for High-Performance Sodium-Metal Anodes

Metal-Embedded Porous Graphitic Carbon Fibers Fabricated from Bamboo Sticks As a Novel Cathode for Lithium-Sulfur Batteries

Biomass-derived high value-added porous carbon as the interlayer material for advanced lithium–sulfur batteries

Construction of three-dimensional ordered porous carbon bulk networks for high performance lithium-sulfur batteries.

3D printing PEDOT-CMC-based high areal capacity electrodes for Li-ion batteries

Fabrication and Characterization of 3D-Printed Highly-Porous 3D LiFePO₄ Electrodes by Low Temperature Direct Writing Process.

Biomass-Derived Carbon for High-Performance Lithium-Sulfur Batteries

Preparation of biomass-based N, P, and S co-doped porous carbon with high mesoporosity based on the synergistic effect of NaOH/thiourea and melamine phosphate and its application in high performance supercapacitors

Preparation of spherical porous carbon from lignin-derived phenolic resin and its application in supercapacitor electrodes

Selective Laser Sintering Parameter Optimization of Prosopis Chilensis/Polyethersulfone Composite Fabricated by AFS-360 SLS

Biomass Waste Inspired Highly Porous Carbon for High Performance Lithium/Sulfur Batteries

Fabrication of 3D self-supporting hierarchical poplar-based thick carbon electrode via coupling delignification and gradient carbonization for electrochemical performance

Synthesis of Sustainable Lignin Precursors for Hierarchical Porous Carbons and Their Efficient Performance in Energy Storage Applications

Expediting the electrochemical kinetics of 3D-printed sulfur cathodes for Li–S batteries with high rate capability and areal capacity