Abstract:The particle damper is an efficient passive control device, which has been the focus of extensive research. It has certain applications in the fields of machinery, aviation, and aerospace, and is currently being investigated in the field of civil engineering. The current theoretical model of the particle damper is based on observations of the vibration phenomena of particles and a controlled structure, which cannot directly reveal its damping mechanism. In this paper, a multiple unidirectional single-particle damper (MUSPD) is discussed. Its mechanical model is established, and the corresponding numerical simulation method is proposed. Both the rationality and feasibility of the numerical simulation method are verified using a shaking table test. Secondly, based on the analysis of the damping mechanism of the MUSPD, the collision force between a particle and the controlled structure is equivalent to an impulse force; hence, an equivalent mechanical model for the MUSPD is established which is solved analytically in the frequency-time domain. Next, based on the equivalent mechanical model, a performance optimization method for the MUSPD under dynamic load is proposed. Finally, the accuracy of the equivalent mechanical model and the performance optimization method, along with the effectiveness of the latter, are verified by numerical simulation of the MUSPD. The results indicate that the MUSPD has a fine damping effect, and its numerical simulation method is reasonable and effective. The equivalent mechanical model of the MUSPD can directly represent its damping mechanism and has high accuracy, and the performance optimization method is both reasonable and feasible.

Numerical and experimental study towards a novel torque damper with minimized air flow instability

An adjacent-effects resistant damper integrating control and measurement functions for duct systems

Numerical Simulation and Test for a Turbine Damper

Research on Adaptive Damper Based on Cone-Slide Valve Combination Regulation Principle

Numerical and Experimental Investigation on Opening Direction Steady Axial Flow Force Compensation of Converged Flow Cartridge Proportional Valve

Dynamic Impact of Hydraulic Systems Using Pressure Feedback for Active Damping

Numerical Study of Porous Tip Treatment in Suppressing Tip Clearance Vortices in Cavitating Flow

Experimental and Numerical Investigation of Flow Forces in a Seat Valve Using a Damping Sleeve with Orifices

Mechanical Modeling of Viscous Fluid Damper with Temperature and Pressure Coupling Effects

Optimal design for working clearance of rotary MRF dampers

Development and characterization of a magnetorheological damper with low-velocity sensitivity

Damping characteristics of a magneto-rheological damper with dual independent controllable ducts

Experimental and Theoretical Investigations on an Asynchronized Parallel Double‐Stage Viscous Fluid Damper

Development of a Rotary Damper Integrated with Magnetorheological Bearings Toward Extremely High Torque–Volume Ratio

Experimental and optimization analysis of a multiple unidirectional single-particle damper

3D FSI FEA SIMULATION AND ANALYSES OF THE DYNAMIC CHARACTERISTICS OF A DISPLACEMENT-SENSITIVE LIQUID DAMPER

Investigation of thermoacoustic oscillation attenuation by modified Helmholtz dampers with dual frequency bands

Numerical Investigation on Static and Rotor-Dynamic Characteristics of Convergent-Tapered and Divergent-Tapered Hole-Pattern Gas Damper Seals.

Numerical and Experimental Studies on Temperature Field of Rotary Mrf Dampers

Numerical Study of the Improvement in Stability and Performance by Use of a Partial Vaned Diffuser for a Centrifugal Compressor Stage

Study on the Characteristics of Gas Spring-Damping Modified Model Bladder-Damper Based on Dynamic Mesh Technology