Abstract:In this paper, a novel magnetorheological (MR) damper working in the squeeze-valve bi-mode of MR fluid (MRF) was developed. The damper was consisted of two parts: the valve part and the squeeze part. Both of the two working parts could provide damping force when the damper worked. Firstly, the model of the novel damper was established to ensure that the damper structure was suitable for our design. Then, the magnetic field distribution inside the MR damper was simulated. The simulated results showed that the magnetic flux density was 120 mT when the current in the coil was 2.0 A, and the magnetic field distribution was uniform at the working area of the MRF. The magnetic flux density inside the damper could be controlled by changing the current in the coil. Finally, the damper was fabricated and its mechanical properties were tested by the universal testing machine (MTS 809). The influences of the displacement, frequency, current, and velocity on the damping force were systematically analyzed. The test results indicated that the largest damping force provided by the MR damper was about 6.5 kN. The curves of the damping force versus displacement were plump, which indicated that the ability of the damper to expend energy was well. The effective damping increased from 31.5 to 620 kNs m(-1) when the current increased from 0 to 2 A. The results indicated the properties of the damper could change in a huge range. To analyze the semi-active control performance of the damper, the back propagation neural network was trained to predict the damping force. The predicted results matched well with the experimental results, which indicated that this novel MR damper had great potential in the semi-active control field.

Numerical and Experimental Studies on Temperature Field of Rotary Mrf Dampers

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Modeling and experimental evaluation of vibration reduction of hydraulic-driven joint with a MRF damper

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Optimal design for working clearance of rotary MRF dampers

Experimental investigation on the dynamic behaviour of a disk-type damper based on magneto-rheological grease

A Disc-Type Magneto-Rheologtic Fluid Damper

Experimental Investigation on the Dynamic Behavior of A Disk-Type Damper Based on Magnetorheological Grease

Design and FEM Analysis of MRF Based Rotary Damper

Magnetic and Mechanical Performance of Magnetorheological Fluid Damper with Different Dimension

DYNAMIC BEHAVIOUR OF SHEAR-TYPE MAGNETORHEOLOGIC GREASE DAMPER ROTOR SYSTEM

Behavior Of A Compressible Magnetorheological Fluid Damper At High Temperatures

A ROUTE TO DESIGN ROTARY MAGNETORHEOLOGICAL DAMPERS

A Disk-Type Magneto-Rheological Fluid Damper for Rotor System Vibration Control

Effect of temperature on the mechanics of magnetorheological fluid damper

Experimental and Theoretical Investigation on Dynamic Behavior of a Flexible Rotor Supported on a Shear-Type Magnetorheologic Fluid Damper

An Experimental Study into Dynamic Behavior of a Magnetorheological Fluid Squeeze Film Damper – Overhung Flexible Rotor

Numerical Analysis of Damping Torque and Construct Design of Rotary MR Dampers

Dynamics of A Rotor Supported on Magnet-Rheological Fluid Squeeze Film Damper

Research on Rotary Disc-Type Mrf Dampers with Nonhomogeneous Magnetic Fields

Mechanical performance of a novel magnetorheological fluid damper based on squeeze-valve bi-mode of MRF