Abstract:By 2030 up to 50% of energy is expected to be carried in the bonds of H2. Global electrolysis capacity must increase from the current 240 MW to an anticipated 300 GW in 2030 and 3500 GW in 2050 to enable this transition. Alkaline and PEM electrolyzers are commercially mature with the currently market share of new installations roughly an equal split between these technologies. However, each of these electrolyzers are associated with challenges – alkaline electrolyzers operate at low current density, and require high concentration electrolytes (30 wt% KOH) to conduct hydroxides through the porous electrode separator (I.e., Zirfon). PEM electrolyzers use a proton conductive membrane to enable high current densities, however, running the reaction in acidic electrolyte requires platinum group catalysts and component coatings that hinder scalability at 2050 targets. AEM water electrolyzers address both of these challenges by pairing anion exchange membrane with alkaline electrolyte to enable high current density operation, at high pressure, without noble metal catalysts. These attributes enable the most cost-effective green hydrogen - bringing the DOE hydrogen shot target of $1/kg within reach. Anion exchange membrane chemistries have previously hindered this type of electrolyzer – AEMs based on quaternary amines, or pendant imidazolium groups chemically degrade in concentrated alkaline electrolyte, and mechanically degrade (from swelling) in low concentration alkaline media. Ionomr's Aemion+ membranes are based on a sterically-protected polybenzimidazole chemistry and are chemically robust (stable in up to 10 M KOH), and exhibit low swelling to enable operation in low concentration electrolytes. These membranes are an enabling technology for long duration water and CO2 electrolysis. This talk highlights how Ionomr's Aemion+ membranes enable performance in excess of 1 A/cm2 at 1.8 V with non-PGM catalysts and a variety of configurations, and >4000 hours of durability in continuous operation. Figure 1

Engineered Thin Diffusion Layers for Anion-Exchange Membrane Electrolyzer Cells with Outstanding Performance

Progress in Constructing High-Performance Anion Exchange Membrane: Molecular Design, Microphase Controllability and In-device Property

LDH Nanosheets Anchored on Bacterial Cellulose-Based Composite Anion Exchange Membranes for Significantly Enhanced Strength and Ionic Conductivity

Engineering Robust Triazine Crosslinked and Pyridine Capped Anion Exchange Membrane for Advanced Water Electrolysis

Interfacial and Vacancy Engineering on 3D-Interlocked Anode Catalyst Layer for Achieving Ultralow Voltage in Anion Exchange Membrane Water Electrolyzer

Hydrogen Production by water Electrolysis with an Ultrathin Anion-exchange membrane (AEM)

Non-precious high entropy alloys and highly alkali-resistant composite membranes based high performance anion exchange membrane water electrolyzers

Pathways Toward Efficient and Durable Anion Exchange Membrane Water Electrolyzers Enabled By Electro‐Active Porous Transport Layers

High-performance anion exchange membrane water electrolyzers with a current density of 7.68 A cm<SUP>-2</SUP> and a durability of 1000 hours

Anion Exchange Membrane Water Electrolyzer: Electrode Design, Lab-Scaled Testing System and Performance Evaluation

High Performance Anion Exchange Membrane Electrolysis Using Plasma-Sprayed, Non-Precious-Metal Electrodes

High Performance Anion Exchange Membranes with Confined Sub‐2‐nm Ion Channel

Advanced Patterned Membranes for Efficient Alkaline Membrane Electrolyzers

Advanced development of anion-exchange membrane electrolyzers for hydrogen production: from anion-exchange membranes to membrane electrode assemblies

Bioinspired Spatially Topological Strategy Boosts the Anion Exchange Membrane for Industrial-scale Water Electrolysis

Durable and Highly-Efficient Anion Exchange Membrane Water Electrolysis Using Poly(biphenyl Alkylene) Membrane

Investigation of thin/well-tunable liquid/gas diffusion layers exhibiting superior multifunctional performance in low-temperature electrolytic water splitting

Improving mass transfer in anion exchange membrane water electrolysis by ordered gas diffusion layer

High Performance AEM Water Electrolysis with Aemion® Membranes

Integrated Reference Electrodes in Anion-Exchange-Membrane Electrolyzers: Impact of Stainless-Steel Gas-Diffusion Layers and Internal Mechanical Pressure

Achieving High‐Performance and 2000 h Stability in Anion Exchange Membrane Fuel Cells by Manipulating Ionomer Properties and Electrode Optimization