Abstract:Herein, a green and novel FeCl3-catalyzed hydrothermal pretreatment method is adopted to convert the bamboo shavings waste into bamboo-based hierarchical porous carbons (BHPCs) with ultra-high specific surface area and excellent electrochemical properties. Utilizing this mild FeCl3 catalyst can not only promote the dehydration, condensation, and carbonization of bamboo shavings to catalyze the formation of hydrochar, but also facilitate the development of the pore structure of hydrochar. Moreover, the effects of different FeCl3 solution concentrations, activation temperatures, and KOH/hydrochar ratios on the pore structure of BHPCs and the electrochemical performance of supercapacitors are thoroughly investigated. Compared with the hydrothermal carbonization without FeCl3 addition, the BHPCs (1-BHPC-800-5) electrode materials obtained by FeCl3-catalyzed hydrothermal pretreatment have superior specific surface area (up to 3688 m(2) g(-1)) and total pore volume (as high as 1.989 cm(3) g(-1)). Meanwhile, the best-performing 1-BHPC-800-5 demonstrates outstanding electrochemical performance in supercapacitor applications, providing a pleasant capacitance of 378 F g(-1) at 0.5 A g(-1) and capacitance retention of 96.6% after 10 000 charge/discharge cycles at 5.0 A g(-1) in 6.0 M KOH electrolyte. The energy density can reach 10.3 Wh kg(-1) at a power density of 250 W kg(-1) in a two-electrode system. Therefore, this novel and efficient catalytic hydrothermal pretreatment method offers a promising prospect for converting waste biomass into hierarchical porous carbon materials with a large specific surface area and excellent electrochemical properties. Key Points center dot Adopting a green FeCl3-catalyzed hydrothermal pretreatment method to convert bamboo shavings waste into BHPCs. center dot BHPCs exhibit a hierarchical porous structure and an ultra-high specific surface area (up to 3688 m(2) g(-1)). center dot A very high capacitive performance (378 F g(-1) at 0.5 Ag-1) is achieved. The excellent rate performance (nearly 71% capacitance retention), outstanding cycle stability (capacitance retention of 96.6% after 10 000 charge/discharge cycles) and large energy density (10.3 Wh kg(-1) at 250 W kg(-1)) are demonstrated.

A Low‐Temperature Dehydration Carbon‐Fixation Strategy for Lignocellulose‐Based Hierarchical Porous Carbon for Supercapacitors

Green Synthesis of Nitrogen-doped Porous Carbon Derived from Rice Straw for High-performance Supercapacitor Application

Synthesis of rice husk derived porous carbon as low-cost and high-performance electrode material for supercapacitors

Hierarchical Micro-/Mesoporous Carbon Derived from Rice Husk by Hydrothermal Pre-Treatment for High Performance Supercapacitor

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

One/Two-Step Contribution to Prepare Hierarchical Porous Carbon Derived from Rice Husk for Supercapacitor Electrode Materials

Cellulose-Solvent-Assisted, One-Step Pyrolysis to Fabricate Heteroatoms-Doped Porous Carbons for Electrode Materials of Supercapacitors

Fabricating N, P-Codoped Hierarchical Porous Carbons from Lignin via Assembled Templating and Activation Strategy for High-Performance Supercapacitors

Preparation of Hierarchical Porous Carbon Based on Corn- Straw Carbon Nanofiber as an Efficient Electrode Material for Supercapacitors

A facile synthesis of hierarchical porous carbon derived from renewable lignin for high-performance supercapacitor

Sustainable Lignin-Derived Hierarchical Porous Carbon for Supercapacitors: A Novel Approach for Holding Electrochemical Attraction Natural Texture Property of Precursor

Facile and low-cost fabrication of interconnected hierarchically porous carbon for high-performance supercapacitors

Nitrogen-Doped Porous Carbon Derived from Cellulose Microfibers of Rice Straw for High-Performance Electrodes of Supercapacitors

The changing structure by component: Biomass-based porous carbon for high-performance supercapacitors

Novel scalable freezing-pore-forming strategy for constructing hierarchically porous carbon materials for supercapacitors

Fabricating sustainable lignin-derived porous carbon as electrode for high-performance supercapacitors

Hierarchical Porous Carbon Derived from Recycled Bamboo Waste As Supercapacitors Electrodes Based on FeCl 3 ‐catalyzed Hydrothermal Pretreatment: Pore Regulation and High‐performance Analysis

Sustainable and Scalable Synthesis of 2D Ultrathin Hierarchical Porous Carbon Nanosheets for High‐Performance Supercapacitor

Facile and Sustainable Synthesis of Sodium Lignosulfonate Derived Hierarchical Porous Carbons for Supercapacitors with High Volumetric Energy Densities

Nitrogen-doped carbon layer on cellulose derived free-standing carbon paper for high-rate supercapacitors

N-doped hierarchically porous carbon from lignite-derived residue for high-performance supercapacitor