Abstract:The present work proposes to investigate the effect of an ultrahigh molecular weight silicone rubber (UHMW-SR) and two ethylene methyl acrylate copolymers (EMA) with different methyl acrylate (MA) content on the mechanical and fire performance of a fireproof acrylonitrile butadiene styrene copolymer (ABS) composite, with an optimum amount of ammonium polyphosphate (APP) and aluminum diethyl phosphinate (AlPi). ABS formulations with a global flame retardant weight content of 20 wt.% (ABS P) were melt-compounded, with and without EMA and UHMW-SR, in a Brabender mixer. During this batch process, ABS P formulations with UHMW-SR and/or EMA registered lower torque values than those of ABS P. By means of scanning electron microscopy (SEM), it was possible to observe that all ABS composites exhibited a homogenous structure without phase separation or particle agglomeration. Slightly improved interfacial interaction between the well-dispersed flame-retardant particles in the presence of EMA and/or UHMW-SR was also noticed. Furthermore, synergies in mechanical properties by adding both EMA and UHMW-SR into ABS P were ascertained. An enhancement of molecular mobility that contributed to the softening of ABS P was observed under dynamic mechanical thermal analysis (DMTA). An improvement of its flexibility, ductility and toughness were also registered under three-point-bending trials, and even more remarkable synergies were noticed in Charpy notched impact strength. Particularly, a 212% increase was achieved when 5 wt.% of EMA with 29 wt.% of MA and 2 wt.% of UHMW-SR in ABS P (ABS E29 S P) were added. Thermogravimetric analysis (TGA) showed that the presence of EMA copolymers in ABS P formulations did not interfere with its thermal decomposition, whereas UHMW-SR presence decreased its thermal stability at the beginning of the decomposition. Although the addition of EMA or UHMW-SR, as well as the combination of both in ABS P increased the pHRR in cone calorimetry, UL 94 V-0 classification was maintained for all flame-retarded ABS composites. In addition, through SEM analysis of cone calorimetry sample residue, a more cohesive surface char layer, with Si-O-C network formation confirmed by Fourier transform infrared (FTIR), was shown in ABS P formulations with UHMW-SR.

Stereolithographic 3D Printing of Intrinsically Flame‐Retardant Shape‐Memory Polymers

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

High-Temperature Shape Memory Photopolymer With Intrinsic Flame Retardancy And Record-High Recovery Stress

A Thermoset Shape Memory Polymer-Based Syntactic Foam with Flame Retardancy and 3D Printability.

Bio‐Based Gradient Composites for 3D/4D Printing With Enhanced Mechanical, Shape Memory, and Flame‐Retardant Properties

Fabrication of Flame Retardant Poly(methyl methacrylate) with Excellent Comprehensive Properties Based on a New Phosphorus-silicon-Nitrogen-Synergistic System

Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing

Design and Synthesis of Shape Memory Phenol-Formaldehyde with Good Irradiation Resistance, Thermal, and Mechanical Properties

Design and Preparation of Shape Memory Phenol–formaldehyde Foam Composites with Excellent Thermal Stability and Mechanical Properties

Flame Retardant Additives in Polylactic Acid (PLA) Photopolymer Resin for 3D Printing Digital Light Processing (DLP)

In situ synthesis of a novel transparent poly (methyl methacrylate) resin with markedly enhanced flame retardancy

3D Printed Shape Memory Polymers Produced via Direct Pellet Extrusion

Synthesis and Characterization of Stereolithography 3D Printing Fluorescent Resin

Thermal, Crystalline and Mechanical Properties of Flame Retarded Poly(lactic Acid) with a PBO-like Small Molecule - Phenylphosphonic Bis(2-aminobenzothiazole)

4D Printing of Shape Memory Polyurethane Via Stereolithography

Synthesis and thermal behavior of a novel UV-curable transparent flame retardant film and phosphorus-nitrogen synergism of flame retardancy

Enhancing shape memory properties of multi-layered and multi-material polymer composites in 4D printing

Characterization of 4D printed shape memory and conventional polymer blends for thermal responsive applications

Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer

Functional Materials for DLP-SLA 3D Printing Using Thiol–Acrylate Chemistry: Resin Design and Postprint Applications

4D Printing of Recyclable Lightweight Architectures Using High Recovery Stress Shape Memory Polymer