Abstract:Process layout of 4D printed CF/PEKK composite. High temperature shape memory polymers (HT‐SMPs) have great utilization in self‐deployable hinges/morphing structures for space/aerospace, and high‐temperature sensors/actuators for electronics. However, HT‐SMPs have many drawbacks, such as low stiffness, strength, thermal stability, and dynamic mechanical properties. This work aims at improving these properties of highly utilized space grade HT‐SMP, PEKK (polyether ketone ketone), by reinforcing it with low‐cost carbon fibers (CFs), and developing its composite via additive manufacturing. The additively manufactured CF/PEKK composites are annealed at 200 °C (CF/PEKK‐A200) and 250 °C (CF/PEKK‐A250), and for the first time, investigated for shape memory effect (SME). The shape fixity and the shape recovery of the CF/PEKK‐UNA (un‐annealed), CF/PEKK‐A200, and CF/PEKK‐A250 are noted to be 95.97%, 88.95%, and 86.40%, and 88.70%, 92.70%, and 95.19%, respectively with a significant weight saving potential of ⁓21%. Dispersion of CFs in PEKK and suitability of processing parameters (blending, extrusion, and 3D printing) are confirmed through scanning electron microscopy (SEM). Thermal degradation temperature (Td ) of the printed CF/PEKK composite (⁓568 °C) is found to be ⁓3.5% higher than PEKK (⁓549 °C). CF/PEKK‐A250 exhibited the highest storage modulus (4438.23 MPa), ~158% higher than PEKK (1722.3 MPa), while CF/PEKK‐A200 demonstrated the highest tensile modulus (10.9 GPa), which is 138.5% higher than PEKK (4.57 GPa) and 312.88% higher than CF/PEKK‐UNA (2.64 GPa). Moreover, CF/PEKK‐A200 exhibited 237.46%, 138.51%, 127.08%, 61.48%, 32.93%, and 50.35% higher tensile modulus than PEEK, PEKK, PEK, CF/PEK, CF/PEEK, and CF/PEKK composites, respectively, showing great potential to replace them. Highlights Printed CF/PEKK composites are investigated for shape memory behavior. The printed composites exhibited outstanding shape memory properties. Printed‐A200 exhibited 138.51% enhanced tensile modulus than pure PEKK. Also, the printed‐A200 showed 313% enhanced modulus than printed‐UNA. Td (568 °C) of the printed composites is found ⁓4% greater than pure PEKK.

High-Temperature Shape Memory Photopolymer With Intrinsic Flame Retardancy And Record-High Recovery Stress

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

Tunable Shape-Memory Behaviors in Amorphous Polymers Through Bound Solvent

Shape Memory Polymers with Regionally Defined Glass Transition Temperature via Digital Photocuring

A Thermoset Shape Memory Polymer-Based Syntactic Foam with Flame Retardancy and 3D Printability.

Stereolithographic 3D Printing of Intrinsically Flame‐Retardant Shape‐Memory Polymers

Thermal responsive photopolymerization 3D printed shape memory polymers enhanced by heat transfer media

An end-capping strategy for shape memory phthalonitrile resins via annealing enables conductivity and wave-absorption

Preparation and characterization of photocurable fluorinated polyether‐based reactive inks

3D Printing Thermally Stable High‐Performance Polymers Based on a Dual Curing Mechanism

Multireusable Thermoset with Anomalous Flame-Triggered Shape Memory Effect.

Low Dielectric Constant Photocurable Fluorinated Poly (Phthalazinone Ether) Ink with Excellent Mechanical Properties and Heat Resistance

4D-printing of high-temperature shape-memory polymers based on polyimide, N,N-dimethylacrylamide and photoactive cross-linkers

4D printing of heat‐stimulated shape memory polymer composite for high‐temperature smart structures/actuators applications

4D Printing of Shape‐Memory Semi‐Interpenetrating Polymer Networks Based On Aromatic Heterochain Polymers

4D Printing of Shape Memory Polyurethane Via Stereolithography

Synthesis of Novel Shape Memory Thermoplastic Polyurethanes (SMTPUs) from Bio-Based Materials for Application in 3D/4D Printing Filaments

Vat photopolymerization of tough glassy polymers with multiple shape memory performances

3D printed epoxy/acrylate hybrid polymers with excellent mechanical and shape memory properties via UV and thermal cationic dual-curing mechanism

4D Printing of Recyclable Lightweight Architectures Using High Recovery Stress Shape Memory Polymer

Design and Synthesis of Shape Memory Phenol-Formaldehyde with Good Irradiation Resistance, Thermal, and Mechanical Properties