Abstract:This study focuses on the great challenges for combined cooling and power supply on hypersonic aircrafts. To address the issues of low thermal efficiency and high fuel consumption of heat sink by the existing CO2 supercritical Brayton cycle, a novel fuel-based CO2 transcritical cooling and power (FCTCP) system is constructed. A steady-state simulation model is built to investigate the impacts of combustion chamber wall temperatures and fuel mass flow rates on the FCTCP system. Thermal efficiency of the CO2 transcritical cycle reaches 25.2~32.8% under various combustion chamber wall outlet temperatures and endothermic pressures. Compared with the supercritical Brayton cycle, the thermal efficiency of novel system increases by 54.5~80.9%. It is found from deep insights into the thermodynamic results that the average heat transfer temperature difference between CO2 and fuel is effectively reduced from 153.4 K to 16 K by split cooling of the fuel in the FCTCP system, which greatly enhances the matching of CO2–fuel heat exchange temperatures and reduces the heat exchange loss of the system. Thermodynamic results also show that, in comparison to the supercritical Brayton cycle, the cooling capacity and power generation per unit mass flow rate of working fluid in the FCTCP system increased by 75.4~80.8% and 12.9~51.6%, respectively. The FCTCP system exhibits a substantial performance improvement, significantly enhancing the key characteristic index of the combined cooling and power supply system. This study presents a novel approach to solving the challenges of cooling and power supply in hypersonic aircrafts under limited fuel heat sink conditions, laying the groundwork for further exploration of thermal management technologies of hypersonic aircrafts.

Optimization of Power and Thermal Management System of Hypersonic Vehicle with Finite Heat Sink of Fuel

Conceptual Design and Optimization of Scramjet Engines Using the Exergy Method

Performance Analysis and Optimization of a Novel S-CO2 Closed-Brayton-cycle-based Thermal Management System for Scramjets

Performance Evaluation of Fuel Indirect Cooling Based Thermal Management System Using Liquid Metal for Hydrocarbon-Fueled Scramjet

Performance analysis of a thermal management system based on hydrocarbon-fuel regenerative cooling technology for scramjets

Thermal management of fuel heat sink in aircraft via flow path optimization

Analysis of the Maximum Flight Mach Number of Hydrocarbon-Fueled Scramjet Engines under the Flight Cruising Constraint and the Combustor Cooling Requirement

Efficient utilization of heat sink of hydrocarbon fuel for regeneratively cooled scramjet

Thermodynamic optimization for a scramjet with Re-cooled Cycle

Integrated Thermal Management Method of Energy Based on Closed Brayton Cycle for Scramjet

Thermal Management System Performance Analysis of Hypersonic Vehicle Based on Closed Brayton Cycle

Study on Combined Thermal Protection Scheme Integrating Supercritical CO2 Regenerative Cooling and Fuel Film Cooling Used for Scramjet Engines

Performance Analysis and Dynamic Optimization of Integrated Cooling and Power Generation System Based on Supercritical CO2 Cycle for Turbine-Based Combined Cycle Engine

Thermal management method of fuel in advanced aeroengines

On compression level of hypersonic airflow in high-mach scramjet

Thermodynamic Analysis and Parametric Study of a Closed Brayton Cycle Thermal Management System for Scramjet

Optimization Research on the Heat Transfer Capacity of an Aircraft Fuel Thermal Management System

Performance Analysis of Multi Turbines and SOFC Combined Power Generation System for Hypersonic Vehicles

Optimization of Thermal Management for the Environmental Worthiness Design of Aviation Equipment Using Phase Change Materials

Experimental study on the thermodynamic characteristics of the high temperature hydrocarbon fuel in the cooling channel of the hypersonic vehicle

A Novel Fuel-Based CO2 Transcritical Cycle for Combined Cooling and Power Generation on Hypersonic Aircrafts