Abstract:The glazing systems are considered as the critical components in terms of the building energy consumption owing to the undesired insulation performance and poor thermal inertial mass. To overcome those challenges, the glazing systems integrated with silica aerogel and PCM (SA-PCM) are confirmed as a promising technology to improve photothermal performance. However, the inevitable conflict remains between the energy saving and daylighting performance when the PCM and silica aerogel are filled into two different layers. Therefore, an innovative roof based on SA-PCM glazing systems is proposed, in which the original PCM layer is divided into five cavities for filling PCM and air. A numerical model to investigate the thermal performance and energy efficiency of the innovative roof is developed. The evaluation of the thermal performance of the innovative roof is conducted by the indicators of temperature decrement factor and temperature time lag, while the energy efficiency is evaluated by the total heat loss through the inner surface of the innovative roof. To evaluate the optical performance of the innovative roof, the dynamic optical properties (transmittance, absorptance, and reflectance) are obtained in conditions of different PCM fill ratios. The photothermal and energy performance of the innovative roof are investigated over a 24-hour period in the severe cold region of the city Daqing (China). The results show that the thermal performance of the innovative roof is improved with the addition of PCM amount embodied in the decrease in magnitude and the increase in phase shift of temperature waves on the inner surface. Besides, both the transmittance and absorptance of the innovative roof change significantly along with the PCM fill ratio over the course of the day, while the change in reflectance is slight. Additionally, the optimal energy performance of the innovative roof occurs at 80% fill ratio of PCM, in which the total heat loss and the energy saving rate account for 2595 kJ/m2·d-1 and 11.37%, respectively. Based on the principle of prioritizing the energy efficiency while considering the demand for light transmission properties of the innovative roof, the fill ratio of PCM is recommended as 60%.

Thermal performance of an innovative double-skin ventilated façade with multistep-encapsulated PCM integration

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Energy and Thermal Performance Analysis of PCM-Incorporated Glazing Units Combined with Passive and Active Techniques: A Review Study

Seasonal thermal performance of a macro-encapsulated phase change material blind integrated double skin façade system: An experimental study

Thermal performance evaluation of glass window combining silica aerogels and phase change materials for cold climate of China

Comparative study of dynamic thermal performance of photovoltaic double skin façades influenced by glass transmittance and natural ventilation

Experimental evaluation of the thermal, lighting, and energy performances of a mechanically ventilated double-skin façade with Venetian blinds and a light shelf

Performance analysis on the concentrated photovoltaic /thermal air collector with phase change material and vacuum double-glazing for temperature regulation

Thermal performance of a novel double-glazed window combining PCM and solar control glass in summer

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Photothermal and energy performance of an innovative roof based on silica aerogel-PCM glazing systems

Summer performance of a naturally ventilated double-skin facade with adjustable glazed louvers for building energy retrofitting

Assessing the effect of night ventilation on PCM performance in high-rise residential buildings

Numerical simulations on the thermal performance of ventilated walls with passive solar heating and latent heat storage in winter

3D Numerical Modeling to Assess the Energy Performance of Solid–Solid Phase Change Materials in Glazing Systems

Combining photovoltaic double-glazing curtain wall cooling and supply air reheating of an air-conditioning system: Energy-saving potential investigation

Potential building energy savings by passive strategies combining daytime radiative coolers and thermochromic smart windows

Thermal performance of a reversible multiple-glazing roof filled with two PCM

Parameter global optimization and climatic adaptability analysis of PCM glazed system for long-term application

Enhancing energy efficiency of PCM wall in winter with novel PCM-DLCB coupling design

Improving thermal performance of a passive ventilation and cooling system by integrating a phase-change material: Dynamic characteristics and parametric examinations