Self-calibrated defocused speckle imaging for remote surface motion measurements

Juuso Heikkinen,Gary S Schajer

DOI: https://doi.org/10.1016/j.optlaseng.2023.107914

IF: 5.666

2024-02-01

Optics and Lasers in Engineering

Abstract:Defocused Speckle Imaging (DSI) is a non-contact optical method that can measure multiaxial object motions at microscopic sensitivity using a simple and mechanically robust optical setup. The object surface is illuminated by a laser beam, and the scattered interference speckle pattern is tracked with a defocused camera. DSI measurement sensitivity increases with distance, and the sensitivity can be tuned by simple camera defocus adjustment. These characteristics make DSI an attractive choice for tracking remote objects in field conditions. However, the use of DSI for practical measurements is limited because the speckle signals due to linear and rotational surface motions mix together, and because the instrument calibration requires accurate object range and surface orientation parameters. To address these issues, the work described here combines two recently presented concepts: 1) a defocused camera pair, and 2) a diffraction-based self-calibration principle. The proposed approach was demonstrated by a series of self-calibrated multiaxial motion measurements performed at an extended (30.7-m) distance. The studied motions included in-plane displacements and out-of-plane rotations (tilts), whereas out-of-plane displacements and in-plane rotations were excluded. The experiments showed DSI's capability for high tilt sensitivity down to 0.0006°, standalone remote angle measurements, and suitability for retroreflective surfaces. The diffraction-based self-calibration approach could monitor sampling distances at a 6.4 % accuracy and the relative surface angles of 2.5–7.4° at a 0.2° accuracy. The defocused camera pair tracked microscopic in-plane displacements (400 µm) and very fine out-of-plane tilts (0.003°) at a high accuracy, with a maximum uncertainty of 6.0 %. The proposed DSI approach is particularly suited for monitoring large objects and for operating in hazardous environments. The findings pave a way for interesting new applications, like high-range remote angle measurements, high-sensitivity straightness measurements, and 3D-positioning utilizing retroreflective markers that already exist in the built infrastructure.

optics