Abstract:Based on the framework of elastic-plastic-hydrocode concrete model, this study established a novel constitutive model of ultra-high performance concrete (UHPC) for impact and blast loadings considering the compaction of shear dilation. First, the established UHPC model is introduced, including five parts: (i) the dynamic failure strength surface, which is divided into tensile, compressive, and tensile-to-compressive regions and considers the Lode-dependence and strain rate effect; (ii) equation of state (EOS) that accounts for the nonlinear volumetric compaction; (iii) damage of strength, which contains independently described tensile and compressive strength hardening or softening formulae; (iv) damage of stiffness for depicting the compaction of shear dilation; (v) plastic flow rule, where the radial return algorithm is adopted for updating stress and an independent plastic potential function is employed to model the shear dilation. Then, parameters of the established UHPC model are systematically calibrated according to tests and empirical suggestions, and are further validated by conducting single element tests under varying loading paths. Through simulating the tests of reinforced UHPC beams/columns and UHPC filled steel tubes under drop hammer impact and reinforced UHPC panels under field explosion, it demonstrates that both the damage patterns and deflection-time histories of UHPC members are precisely reproduced by the established UHPC model. Furthermore, based on comparative simulations, it shows the compaction of shear dilation is critical for predicting the structural residual deflection of reinforced UHPC members. This study discloses a possibility to establish a constitutive model of concrete suitable for impact and blast scenarios with a wide range of strain rate and hydrostatic pressure.

Application of closest point projection method to unified hardening model

Implicit Integration of an Anisotropic Egg-Shaped Elastoplastic Model for Saturated Soft Clay

Loading–unloading judgement for advanced plastic UH model

Geotechnical analysis involving strain localization of overconsolidated soils based on unified hardening model with hardening variable updated by a composite scheme

Unified hardening (UH) model for clays and sands

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

A Return Mapping Algorithm For Unified Strength Theory Model

Drained Cavity Expansion Analysis with a Unified Hardening (UH) Model for Clays and Sands

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Stability Analysis of Overconsolidated Unsaturated Red Clay Slope Based on Modified UH Model

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

A Coupled Elastoplastic Damage Model for Clayey Rock and Its Numerical Implementation and Validation

Novel constitutive model of UHPC under impact and blast loadings considering compaction of shear dilation

Unified Elastoplastic Finite Difference and Its Application

A novel dynamic constitutive model for UHPC under projectile impact

A sequential linear complementarity problem for multisurface plasticity

AN INTEGRATION ALGORITHM FOR DRUCKER-PRAGER ELASTIC-PLASTIC MODEL WITH NON-ASSOCIATED FLOW RULE AND ISOTROPIC HARDENING

Study of Combined Multi-Point Constraint Multi-Scale Modeling Strategy for Ultra-High-Performance Steel Fiber-Reinforced Concrete Structures

Unified Elasto-Plastic Associated and Non-Associated Constitutive Model and Its Engineering Applications

Mesoscopic modelling of UHPCC material under dynamic tensile loadings

A convex cone programming based implicit material point method