Abstract:Daylight-redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. Microstructured prismatic window films can be manufactured using low-cost, roll-to-roll fabrication methods and adhered to the inside surface of existing windows as a retrofit measure or installed as a replacement insulating glass unit in the clerestory portion of the window wall. A clear film patterned with linear, 50- to 250-μm-high, four-sided asymmetrical prisms was fabricated and installed in the south-facing, clerestory low-e, clear glazed windows of a full-scale testbed facility. Views through the film were distorted. The film was evaluated in a sunny climate over a 2-year period to gauge daylighting and visual comfort performance. The daylighting aperture was small (window-to-wall ratio of 0.18) and the lower windows were blocked off to isolate the evaluation to the window film. Workplane illuminance measurements were made in the 4.6-m (15-ft)-deep room furnished as a private office. Analysis of discomfort glare was conducted using high dynamic range imaging coupled with the EvalGlare software tool, which computes the daylight glare probability and other metrics used to evaluate visual discomfort. The window film was found to result in perceptible levels of discomfort glare on clear sunny days from the most conservative view point in the rear of the room looking toward the window. Daylight illuminance levels at the rear of the room were significantly increased above the reference window condition, which was defined as the same glazed clerestory window but with an interior Venetian blind (slat angle set to the cut-off angle), for the equinox to winter solstice period on clear sunny days. For partly cloudy and overcast sky conditions, daylight levels were improved slightly. To reduce glare, the daylighting film was coupled with a diffusing film in an insulating glazing unit. The diffusing film retained the directionality of the redirected light spreading it within a small range of outgoing angles. This solution was found to reduce glare to imperceptible levels while retaining for the most part the illuminance levels achieved solely by the daylighting film.

Full-Scale Assessment of a Liquid CsWO 3 -SnO 2 Near-Infrared Shielding Coating and a Nanoceramic WO 3 Photochromic Window Film for In-Situ Window Retrofits

Design, fabrication, and physical properties analysis of laminated Low-E coated glass for retrofit window solutions

Energy Performance and Comfort Analysis of Three Glazing Materials with Distinct Thermochromic Responses as Roller Shade Alternative in Cooling- and Heating-Dominated Climates

Empirical Assessment of a Prismatic Daylight-Redirecting Window Film in a Full-Scale Office Testbed

Energy and daylight performance of a smart window: Window integrated with thermotropic parallel slat-transparent insulation material

Natural Airflow in a Reversible Double-Glass Window with Reflective Film for Building Applications

Thermal analysis of a double-glazing window using a Nano-Disbanded Phase Changing Material (NDPCM)

Assessing the Performance of a Thermoresponsive Liquid‐Based Smart Windows for Building Thermal Regulation through Outdoor Experimentation and Computational Modeling

Assessment of the visual, thermal and energy performance of static vs thermochromic double-glazing under different European climates

Low energy consumption thermochromic smart windows with flexibly regulated photothermal gain and radiation cooling

Thermal performance of secondary glazing as a retrofit alternative for single-glazed windows

Numerical Study on the Thermal Insulation of Smart Windows Embedded with Low Thermal Conductivity Materials to Improve the Energy Efficiency of Buildings

Annual Energy‐Saving Smart Windows with Actively Controllable Passive Radiative Cooling and Multimode Heating Regulation

Performance Demonstration and Simulation of Thermochromic Double Glazing in Building Applications

Energy assessment of a sliding window integrated with PV cell and multiple PCMs

Scalable Photochromic Film for Solar Heat and Daylight Management

Spectrally selective nanoparticle-enhanced phase change materials: A study on data-driven optical/thermal properties and application of energy-saving glazing under different climatic conditions

Comfort assessment and energy performance analysis of a novel adjustable semi-transparent photovoltaic window under different rule-based controls

Zwitterionic hydrogel smart windows: Radiative cooling, privacy protection and energy savings

Near-infrared absorbing glazing for energy-efficient windows: A critical review and performance assessments from the building requirements