Abstract:Methyl laurate, a high cetane biofuel, was produced by a high‐shear mixing assisted liquid esterification and a Central Composite Design of experiments is used to investigate the simultaneous effect of five reaction variables. Summary Lauric acid (LA) is the precursor of methyl laurate (ML), which is identified as a valuable large cetane number methyl ester. In this work, LA is converted via high‐shear mixing (HSM)‐assisted homogeneous acid esterification with methanol at varying reaction conditions. A central composite design (CCD) is used to investigate formally the simultaneous influence of methanol:LA ratio (2‐13 mol/mol), temperature (30°C‐60°C), mixing speed (500‐2000 rpm), catalyst mass (0.25‐4.0 g) and time (1‐12 min) on LA conversion. By combining CCD statistical results and response surface methodology, it is found that catalyst mass, methanol:LA ratio and temperature are the most influencing factors on LA conversion, while only the quadratic effects of catalyst mass and methanol:LA and three of the 10 possible two‐way linear interactions, viz., methanol:LA ratio‐catalyst mass, temperature‐time and temperature‐catalyst mass, are statistically significant. Obtained numerically, the maximum LA conversion (92%) is achieved at 60°C, 13 methanol:LA ratio, 4.0 g of catalyst, 2000 rpm and 12 min. Interestingly, assisting the said esterification by HSM results in a little mixing speed‐sensitive process with low mixing speed and reduced time operation being sufficient to conduct the reaction efficiently.

Esterification of Free Fatty Acids Using Layered Carboxylates and Hydroxide Salts as Catalysts

Hydrodecarboxylation of fatty acids into liquid hydrocarbons over a commercial Ru/C catalyst under mild conditions

Catalytic in Situ Hydrogenation of Fatty Acids into Fatty Alcohols over Cu-Based Catalysts with Methanol in Hydrothermal Media

Investigating the high‐shear mixed catalytic esterification of lauric acid with methanol using central composite design

A new heterogeneous acid catalyst system for esterification of free fatty acids into methyl esters

Synthesis and Optimization of Methyl Laurate Using Sulfonated Pyrrolidonium Ionic Liquid as a Catalyst

Mesoporous Sulfonic Acids as Selective Heterogeneous Catalysts for the Synthesis of Monoglycerides

Metal-Exchanged Phosphomolybdic Acid Salts-Catalyzed Esterification of Levulinic Acid

Esterification And Transesterification On Al2o3-Doped Sulfated Tin Oxide Solid Acid Catalysts

Balance between Catalyst Acidity and Hydrophilicity in Biofuel Production from Fatty Acid Esterification over Al-SBA-15

Supercritical CO2 as solvent for fatty acids esterification with ethanol catalyzed by Amberlyst-15

Methanesulfonic Acid As a More Efficient Catalyst for the Synthesis of Lauraldehyde Glycerol Acetal

Efficient Carbon-Based Solid Acid Catalysts for the Esterification of Oleic Acid

Fatty Acid Methyl Ester Synthesis over Fe3+-Vanadyl Phosphate Catalysts

Solid acid catalysts based on sulfonated carbon nanostructures embedded in an amorphous matrix produced from bio-oil: esterification of oleic acid with methanol

Effect of Structure of CuO/ZnO/Al2O3 Composites on Catalytic Performance for Hydrogenation of Fatty Acid Ester

Lipase catalyzed epoxidation of fatty acid methyl esters derived from unsaturated vegetable oils in absence of carboxylic acid

Transesterification of edible, non-edible and used cooking oils for biodiesel production using calcined layered double hydroxides as reusable base catalysts

Preparation of Solid Acid Catalyst from Industrial Waste Kraft Lignin for Methyl Oleate Production by Esterification

On the influence of Si:Al ratio and hierarchical porosity of FAU zeolites in solid acid catalysed esterification pretreatment of bio-oil