Abstract:The flow condensation heat transfer coefficient of R134a inside two helical micro-fin tubes with outer diameter of 6.35 mm and helical angles of 18o and 28o respectively were experimentally studied at a high mass flux ranging from 500 to 1100 kg m−2 s−1. The condensation temperatures are 35°C, 40°C and 45°C, and the vapor qualities ranges from 0.95 to 1.00 at the inlet section and from 0.00 to 0.05 at the outlet section. Experimental results show that there are annular and intermittent flow regimes inside the tube under experimental conditions, the ratio of annular flow region to the total heat transfer region is about 70%. The liquid film flow changes from rotational flow to coexistence of rotational and horizontal flows when the vapor quality is 0.475±0.08, 0.486±0.06 and 0.521±0.05, respectively and the corresponding saturation temperature is 35°C, 40°C and 45°C. Based on the experimental data, the heat transfer coefficient increases with increasing mass flux and fin helical angle, and with decreasing saturation temperature and Reynolds number of cooling water. In addition, the heat transfer coefficient of annular flow is greater than that of intermittent flow, in other words, the heat transfer coefficient increases with increasing vapor quality. The heat transfer coefficient obtained at high mass flux was compared with the calculated data of some published correlations used at low mass flux. It was found that most correlations underestimate the experimental heat transfer coefficient inside the micro-fin tube, and these prediction deviation increases with increasing mass flux and fin helical angle. By introducing some dimensionless numbers as well as considering the flow mechanism of liquid film inside the tube, two heat transfer coefficient correlations were proposed based on the experimental data. The ratio of liquid film thickness to fin height was used to characterize whether the liquid film flow is rotational flow or coexistence of rotational and horizontal flows in the proposed correlation, which shows a better prediction accuracy with a mean deviation of less than 7.3%.

The Mass Transfer Analogy to Heat Transfer in Fluids With Temperature-Dependent Properties

Heat and mass transfer in an unsteady squeezed Casson fluid flow with novel thermophysical properties: Analytical and numerical solution

Effects of Shear Dependent Viscosity and Variable Thermal Conductivity on the Flow and Heat Transfer in a Slurry

The Heat and Mass Transfer Process of the Counter-Flow Dew Point Evaporative Cooler

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Eckert number application for scaling of heat-mass transfer analogy in transonic film cooling

Heat Transfer and Flow of a Slag-Type Non-Linear Fluid: Effects of Variable Thermal Conductivity.

Understanding coupled mass-heat transport in fluids by approach-to-equilibrium molecular dynamics

Mass Transfer outside a Horizontal Tube for an Indirect Evaporative Cooler

Asymptotic analysis of fluid thermodynamic behaviors in the near-critical region under highly variable physical properties

Mass and Thermodiffusion in Non-equilibrium Fluctuating Hydrodynamics

Consolidated theory of fluid thermodiffusion

Similarity Solution of Heat and Mass Transfer for Natural Convection over a Moving Vertical Plate with Internal Heat Generation and a Convective Boundary Condition in the Presence of Thermal Radiation, Viscous Dissipation, and Chemical Reaction

Friction and heat transfer in forced air convection with variable physical properties

Fundamental Heat and Entropy Transfer Mechanisms of Convection Underlying the First and Second Laws for an Unsteady Multiport System and Their Applications in Parallel Flow Heat Exchangers

General Heat Conduction Equations Based on the Thermomass Theory

A standard formulation of the steady convective mass transfer problem

Thermodynamic and thermophysical effects enabling high-forced convection heat transfer coefficients in supercritical fluids

Mass Nature Of Heat And Its Application Vii: Coupled Heat And Mass Transfer Optimization Based On The Entransy Theory

Analysis methodology during heat transfer in fluid domain: Conduction-advection thermal resistance in parallel

Influence of variable fluid properties on mixed convective Darcy–Forchheimer flow relation over a surface with Soret and Dufour spectacle