Abstract:The use of film cooling is crucial to avoid high metal temperatures in gas turbine applications, thus ensuring a high lifetime for vanes and blades. The complex turbulent mixing process between the coolant and the main flow requires an accurate numerical prediction to correctly estimate the impact of ejection conditions on the cooling performance. Recent developments in numerical models aim at using hybrid approaches that combine high precision with low computational cost. This paper is focused on the numerical simulation of a cylindrical film cooling hole that operates at a unitary blowing ratio, with a hot gas Mach number of Mam = 0.6, while the coolant is characterized by plenum conditions (Mac = 0). The adopted numerical approach is the Stress-Blended Eddy Simulation model (SBES), which is a blend between a Reynolds-Averaged Navier–Stokes approach and a modeled Large Eddy Simulation based on the local flow and mesh characteristics. The purpose of this paper is to investigate the ability of the hybrid model to capture the complex mixing between the coolant and the main flow. The cooling performance of the hole is quantified through the film cooling effectiveness, the Net Heat Flux Reduction (NHFR), and the discharge coefficient CD calculation. Numerical results are compared both with the experimental data obtained by the University of Karlsruhe during the EU-funded TATEF2 project and with a Scale Adaptive Simulation (SAS) run on the same computational grid. The use of λ2 profiles extracted from the flow field allows for isolating the main vortical structures such as horseshoe vortices, counter-rotating vortex pairs (e.g., kidney vortices), Kelvin–Helmholtz instabilities, and hairpin vortices. Eventually, the contribution of the unsteady phenomena occurring at the hole exit section is quantified through Proper Orthogonal Decomposition (POD) and Spectral Proper Orthogonal Decomposition methods (SPOD).

Eckert number application for scaling of heat-mass transfer analogy in transonic film cooling

Prediction of transonic film cooling using the turbulent viscosity correction method

Numerical Investigation Of Coolant-To-Mainstream Scaling Parameters With Film Cooling On Pressure And Suction Side Of A Gas Turbine Blade

Mixing and film cooling in supersonic duct flows

Conjugate Heat Transfer Analysis of Film Cooling Flows

NUMERICAL INVESTIGATION OF DIFFERENT TURBULENCE MODELS APPLIED IN COMBINED IMPINGEMENT AND FILM COOLING

Scalar Diffusion Equation-Based Model to Predict 2-Dimensional Film Cooling Effectiveness of a Shaped Hole

Evaluation of Film Cooling Adiabatic Effectiveness and Net Heat Flux Reduction on a Flat Plate Using Scale-Adaptive Simulation and Stress-Blended Eddy Simulation Approaches

Conjugate Heat Transfer Predictions on Combined Impingement and Film Cooling of a Blade Leading Edge Model

Algebraic Anisotropic Eddy-Viscosity Modeling for Application to Turbulent Film Cooling Flows

ON THE RELIABILITY OF RANS TURBULENCE MODELS FOR ENDWALL COOLING PREDICTION

Large Eddy Simulation of Highly Compressible Film Cooling in Transonic Crossflow

Experimental and numerical investigations of overall cooling effectiveness on a vane endwall with jet impingement and film cooling

Systematic Investigation On Conjugate Heat Transfer Rates Of Film Cooling Configurations

Numerical analysis of cooling efficiency for turboshaft engines with converging-diverging film cooling holes

The interaction between upstream and downstream film cooling rows in flow field and heat transfer

Comprehensive Evaluation on Conjugate Heat Transfer and Thermal Stress Performance of Film Cooling

A Comparative Study of Film Cooling with Combined Impingement and Film Cooling

Numerical Simulation of Shock Wave-Boundary Layer Interaction with Supersonic Film Cooling

Large-Eddy Simulation of Film Cooling with Internal Coolant Crossflow Effects

Large Eddy Simulation of Energy Transport in Highly Compressible Transverse Jets