Abstract:A numerical double-freeform-optical-surface design method is proposed for beam shaping applications. In this method, both the irradiance distribution and the wavefront of the output beam are taken into account. After numerically obtaining the input-output ray mapping based on Energy conservation using the variable separation method, the two freeform optical surfaces can be constructed simultaneously and point by point corresponding to the ray mapping based on Snell's law and the constancy of the optical path length. The method is only applicable for separable irradiance distributions. However, such a restriction is fulfilled by many practical laser beam shaping examples. Moreover, the restriction can simplify the computation considerably. Therefore, the method may be quite useful in practice, although it is not applicable to more general cases. As an example, the method was applied to design a two-plano-freeform-lens system for transforming a collimated 20 mm Gaussian laser beam (beam waist: 5mm) into a uniform 10 x 40 mm(2) rectangular one without changing the wavefront. Simulation results show that we can obtain a dual lens beam shaping system with the relative root mean square deviation of the irradiance ranging from 0.0652 to 0.326 and the power ratio concentrated on the desired region ranging from 97.5% to 88.3% as the output beam transfers from 0mm to 1000mm. (C)2013 Optical Society of America

Freeform mirror design for beam shaping by a combined approach using Poisson-based grid optimization and a discrete cosine transform

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

Design Beam Shapers with Double Freeform Surfaces to Form a Desired Wavefront with Prescribed Illumination Pattern by Solving a Monge-Ampère Type Equation

Design of reflective lens with Zernike polynomial free form surfaces

Design of Freeform Illumination Optics

A mathematical model of the single freeform surface design for collimated beam shaping.

Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Freeform Surface Lens Design for Uniform Illumination

Design of Off-angle Beaming Device Based on Subwavelength Metal Thin Film Microstructure

Designing Two Freeform Surfaces with Monge–Ampère Equation Method for Point-Like Sources

The design of the freeform reflector for uniform illumination

Beam shaping system design using double freeform optical surfaces.

Towards Automatic Freeform Optics Design: Coarse and Fine Search of the Three-Mirror Solution Space

Double Freeform Surfaces Design for Laser Beam Shaping with Monge–Ampère Equation Method

Differentiable design of freeform diffractive optical elements for beam shaping by representing phase distribution using multi-level B-splines

Design Method of Freeform Off-Axis Multi-Mirror Optical Systems

Beam Shaping Based on Axisymmetric Aspheric Mirrors

Design method of freeform off-axis three-mirror reflective imaging systems

Tailoring Freeform Beam-Shaping Lenses for Edge-Emitting Lasers

Efficient Optimal Design of Smooth Optical Freeform Surfaces Using Ray Targeting