Abstract:There have been over 17 million COVID-19 infections worldwide up to July 31, 2020, but the exact transmission route remains a subject for debate. Virus load in different-sized respiratory droplets is the key to address the above question. Investigation on the droplet deposition characteristics during exhalation inside the respiratory tract will facilitate the understanding of their origin and importance in transmitting the respiratory infection. Based on a realistic respiratory model, this study utilized the computational fluid dynamic (CFD) simulation to investigate the deposition of droplets originating from infection sites like pharynx, larynx and trachea under three flow conditions, namely 30 L/min (representing the normal breathing condition), 60 L/min (speaking) and 180 L/min (coughing). The SST k-omega turbulence model integrated in ANSYS Fluent software was utilized to obtain the flow field inside the respiratory tract by solving the continuity and momentum equations, and the Lagrangian approach was used to calculate droplet motion and deposition with the discrete random walk model to account for the turbulence fluctuation effect. Evaporation of droplets was not considered inside the saturated respiratory tract. Droplet diameter, flow rate of the exhaling air, and complexity of the respiratory tract geometry are the most important factors in determining the deposition pattern of respiratory droplets. It is revealed that the largest droplet that originates from the joint of pharynx and larynx and is able to escape out of the respiratory tract is about 20 mu m (30 L/min) or 10 mu m (60-180 L/min) in diameter; the so-called cut-off sizes for vocal cord and trachea originated droplets are 7 mu m (30 L/min), 5 mu m (60 L/min) or 3 mu m (180 L/min). Larynx and joint of larynx and pharynx are the most important deposition sites due to their complexity in geometry and the existence of the laryngeal jet, whose velocity is up to 102 m/s during coughing and 32 m/s during speaking; the nasal cavity is also effective in trapping relatively small droplets as the airflow has a sudden change in direction before entering the oral cavity. Under the investigated speaking scenario (60 L/min), the escape rate of 1 mu m droplets is around 50%, and the maximum escape rates of 5 and 10 mu m droplets are respectively 13.1% and 1.3% (originating from the joint of pharynx and larynx). Although large droplets up to several hundred micrometers can be produced inside the oral cavity due to the atomization mechanism, they seldom carry pathogen. Thus, for COVID-19 patents in the early stage of infection who show upper respiratory symptoms, the cut-off size of virus-laden droplets released into the environment is about 20 mu m; with the shifting of infection to the lower respiratory tract in the later stage, the cut-off size decreases to 7 mu m. Respiratory droplets evaporate immediately after escaping into the indoor environments and shrink to about one third of their initial size, so airborne route is speculated to be important in the transmission of COVID-19. Further investigations considering realistic flow conditions together with droplet sampling experiments on human volunteers are necessary to confirm these cut-off sizes.

Superspreading events suggest aerosol transmission of SARS-CoV-2 by accumulation in enclosed spaces

Numerical Investigation on the Origin of Virus-Laden Droplets in the Respiratory Tract

Airborne transmission of SARS-CoV-2 in indoor environments: A comprehensive review

Analyzing the dominant SARS-CoV-2 transmission routes toward an ab initio disease spread model

Airborne Transmission Route of COVID-19: Why 2 Meters/6 Feet of Inter-Personal Distance Could Not Be Enough

Analyzing the dominant SARS-CoV-2 transmission routes towards an ab initio SEIR model

Environmental Effects on Viable Virus Transport and Resuspension in Ventilation Airflow

Aerosol Transmission of SARS-CoV-2? Evidence, Prevention and Control

Long distance airborne transmission of SARS-CoV-2: rapid systematic review

Airborne transmission of COVID‐19 virus in enclosed spaces: An overview of research methods

SARS-CoV-2 Aerosol Transmission and Detection

Aerodynamic analysis of SARS-CoV-2 in two Wuhan hospitals

Indoor Model Simulation for COVID-19 Transport and Exposure

Risk assessment for long and short range airborne transmission of SARS-CoV-2, indoors and outdoors

Superspreading of SARS-CoV-2 at a choir rehearsal in Finland-A computational fluid dynamics view on aerosol transmission and patient interviews

Extended lifetime of respiratory droplets in a turbulent vapour puff and its implications on airborne disease transmission

Consideration of the Aerosol Transmission for COVID‐19 and Public Health

CFD modelling of indoor aerosol transport to infer airborne SARS-CoV-2 transmission risk

Transmission Via Aerosols: Plausible Differences among Emerging Coronaviruses

Mitigating airborne transmission of SARS-CoV-2

Estimation of airborne viral emission: Quanta emission rate of SARS-CoV-2 for infection risk assessment