Abstract:The stability of coal and rock masses in water-rich mines is affected by both mine water erosion and dynamic disturbances. Thus, it is necessary to study the dynamic mechanical response and failure characteristics of coal and rock under the combination of saltwater and a high strain rate. To this end, a split Hopkinson pressure bar device was employed to investigate the effects of impact velocity, water content, and immersion liquid on the dynamic mechanical behaviours of coal and rock. The results revealed that the weakening effect of saltwater on the dynamic mechanical properties of coal and rock is much greater than that of distilled water. With increasing moisture content, the dynamic compressive strength of the coal specimens decreases monotonically, while that of the rock shows a trend of first increasing and then decreasing. The failure process and destruction of coal and rock are comprehensively affected by both the external impact load and the physical and mechanical properties of the material. The degree of damage of the coal and rock specimens increases with increasing impact velocity and water content. Moreover, the influence of various factors on the impact fracture mechanism of coal and rock under saltwater immersion conditions was revealed. These findings are highly important for the design and maintenance of underground coal and rock building structures.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the mechanical response and failure characteristics of coal rock under dynamic load under the condition of brine immersion. Specifically, the research aims to explore the influence of impact velocity, water content and immersion liquid on the dynamic mechanical behavior of coal rock. By using the Split Hopkinson Pressure Bar (SHPB) device, the researchers analyzed the influence of brine on the dynamic mechanical properties of coal rock and compared it with distilled water. The research shows that the weakening effect of brine on the dynamic mechanical properties of coal rock is greater than that of distilled water. With the increase of water content, the dynamic compressive strength of coal sample specimens decreases monotonically, while rock specimens show a trend of first increasing and then decreasing. In addition, the damage degree of coal - rock specimens increases with the increase of impact velocity and water content. These findings are of great significance for the design and maintenance of underground coal - rock building structures. ### Main research questions: 1. **Influence of brine on the dynamic mechanical properties of coal rock**: Research on the weakening effect of brine on the dynamic mechanical properties of coal rock relative to distilled water. 2. **Influence of water content on the dynamic mechanical properties of coal rock**: Explore the change of the dynamic compressive strength of coal rock under different water contents. 3. **Influence of impact velocity on the dynamic mechanical properties of coal rock**: Analyze the damage degree and failure characteristics of coal rock under different impact velocities. 4. **Failure mechanism of coal rock under brine immersion conditions**: Reveal the failure mechanism of coal rock under dynamic load under brine immersion conditions. ### Research methods: - **Specimen preparation**: Coal - rock specimens were collected from the coal seam and basic roof of the 14,030 working face in Zhaogou No. 2 Coal Mine in Xinxiang City, China, and made into cylindrical specimens with a diameter of 50 mm and a length - to - diameter ratio of 1:1. - **Experimental system**: The SHPB impact loading system developed by China University of Mining and Technology (Beijing) was used for the experiment. The system includes a stress wave generator, a rod system, and a data processing and image acquisition unit. - **Water absorption design**: The specimens were dried before the experiment and then immersed in distilled water and 0.1 mol/L NaCl solution for different times respectively to achieve different water contents. - **Data processing**: The stress - strain signals were recorded by strain gauges, and the failure images of coal - rock specimens during the impact process were captured by a high - speed camera. Parameters such as dynamic stress, strain, strain rate and energy dissipation were calculated. ### Key formulas: 1. **Specimen saturation**: \[ \omega_t=\frac{m_t - m_d}{m_s - m_d}\times100\% \] where \(m_t\) is the mass of the treated specimen, \(m_d\) is the mass of the dried specimen, and \(m_s\) is the mass of the specimen after saturation with water. 2. **Specimen water content**: \[ \omega_w=\frac{m_w - m_d}{m_d}\times100\% \] where \(m_w\) is the mass of the specimen before treatment, and \(m_d\) is the mass of the dried specimen. 3. **Dynamic stress**: \[ \sigma(t)=\frac{1}{2}E_0[\varepsilon_i(t)+\varepsilon_r(t)+\varepsilon_t(t)] \] 4. **Dynamic strain**: \[ \varepsilon(t)=\frac{C_0}{L}\int_0^t[\varepsilon_i(t)-\varepsilon_r(t)-\varepsilon_t(t)]dt \] 5. **Strain rate**: \[ \dot{\varepsilon}(t)=\frac{C_0}{L}[\varepsilon_i(t)-\varepsilon_r(t)-\varepsilon_t(t)] \] 6. **Incident wave energy**: \[ W_I(t)=A_0C_0E_0\int_0^t\varepsilon

Dynamic mechanical response and failure characteristics of coal and rock under saltwater immersion conditions

Water-immersion softening mechanism of coal rock mass based on split Hopkinson pressure bar experiment

Experimental study on dynamic mechanical properties of multidirectional constrained water-bearing coal samples under dynamic-static coupling loading

Study on the effects of temperature and immersion on the acoustic emission and electromagnetic radiation signals of coal rock damage under load

Dynamic tensile properties, deformation, and failure testing of impact-loaded coal samples with various water content

Damage degradation law of mechanical properties of sandstone under different water-rich states

Dynamic behaviour and failure mechanism of coal subjected to coupled water-static-dynamic loads

Damage Effect and Deterioration Mechanism of Mechanical Properties of Fractured Coal–Rock Combined Body Under Water–Rock Interaction

Influence characteristics and macro-meso mechanism of pressure immersion time on tensile properties for coal materials

Experimental investigation of dynamic mechanical characteristics of inhomogeneous composite coal-sandstone combination for coalbed methane development

Microstructural Evolution and Damage Mechanism of Water-Immersed Coal Based on Physicochemical Effects of Inorganic Minerals

Experimental Study on the Damage and Deterioration Behaviour of Deep Soft Rock under Water-Rock Interaction

Mechanical Response Characteristics and Law of Instantaneous Energy Conversion for Water-Bearing Coal–Rock Masses Subjected to Mining-Induced Stress

Investigation of dynamic fracture behavior and energy dissipation of water-bearing coal under impact load

Aging deterioration of mechanical properties on coal-rock combinations considering hydro-chemical corrosion

Experimental Investigation on Mechanical and Damage Properties of Single Fractured Coal Subjected to Water Pressure and Triaxial Compression

Experimental Study on the Dynamic Tensile Characteristics of Coal Samples

Analysis of mechanical response mechanism and energy evolution characteristics of saturated coal with a single pre-existing hole

Macroscopic and microscopic mechanical behavior and seepage characteristics of coal under hydro-mechanical coupling

Dynamic Mechanics and Crystal Structure Fracture Characteristics of Rock-like Materials in Coal Mines

Experimental Study on Uniaxial Compression Failure Characteristics and Mechanical Properties of Composite Aquiclude Rock