Abstract:The deterioration of mechanical properties and structural instability of coal–rock system under water–rock interaction seriously affect the efficient mining of coal and the safety of workers. The interlayer weak zone between coal seam and rock strata in coal–rock system is the main area of fracture distribution. The existence of fractures speeds the process of water–rock interaction, accounting for aggravating the damage of coal–rock system. Considering penetrating fractures and water–rock interaction, five kinds of coal–rock combined body with different fracture widths were prefabricated, and uniaxial compression tests under different soaking time were carried out. The research shows that: (1) The larger the fracture width and the longer the soaking time, the more obvious the compaction stage and the plastic stage, the less obvious the elastic stage, and the slower the damage. (2) With the increase of fracture width, the compressive strength, elastic modulus, pre-peak energy, post-peak energy and impact energy index decrease gradually, and there is a linear relationship between fracture width and each parameter. With the increase of soaking time, the compressive strength, elastic modulus, pre-peak energy, post-peak energy and impact energy index all decrease gradually, but there is a non-linear relationship between soaking time and each parameter. (3) The crack evolution law of coal–rock combined body under the influence of fracture width and soaking time is analyzed. It is found that the fracture width and soaking time have a certain influence on the wing crack, secondary inclined crack, secondary coplanar crack, inclined crack, secondary derivative crack, wing crack derivative crack, far field crack and flake phenomenon. (4) With the increase of fracture width and soaking time, the cohesion and internal friction angle decrease gradually. (5) Considering the influence of fracture width and soaking time, the D–P criterion is modified. Two parameters and are introduced into the Drucker–Prager criterion, and the strength criterion considering fracture width and soaking time is constructed and verified. The error range of all samples is 2.48–9.30%, which indicates that the modified D–P strength criterion has high accuracy and good rationality. (6) The energy migration model of fractured coal–rock combined body is constructed, and the energy migration mechanism of intact and fractured coal–rock combined body is compared and analyzed. The two ends of the fracture are the main energy accumulation areas. When the fracture end of the coal component is destroyed, a part of the energy is transported from the coal component to the fracture end of the rock component, and released in the form of deformation or failure of the rock component. (7) The deterioration mechanism of mechanical properties of coal–rock combined body under water–rock interaction is analyzed. The physical, chemical and mechanical effects between water and coal–rock combined body lead to the damage inside the coal rock, and the continuous accumulation of damage leads to the macroscopic damage of the sample. The deterioration effect of mechanical properties under water–rock interaction is a process of continuous accumulation of damage.

Aging deterioration of mechanical properties on coal-rock combinations considering hydro-chemical corrosion

Damage degradation law of mechanical properties of sandstone under different water-rich states

Damage Effect and Deterioration Mechanism of Mechanical Properties of Fractured Coal–Rock Combined Body Under Water–Rock Interaction

Influence of water saturation on mechanical characteristics and fracture evolution of coal rock assemblage with rough interfaces

Mechanisms of failure in coal samples from underground water reservoir

Progressive microstructural evolution characteristics and weakening mechanism of coal exposed to Acid Mine drainage (AMD)

Experimental research on compressive strength deterioration of coal seam floor sandstone under the action of acidic mine drainage

Mechanical Failure Modes and Fractal Characteristics of Coal Samples under Repeated Drying–Saturation Conditions

Deterioration of compressive properties of coal rocks under water and gas coupling

Study on Microscopic Mechanism and Failure Mode of Water–Rock Coupling in Fine Sandstone Under Uniaxial Compression

Experimental Research on the Mechanical Characteristics and the Failure Mechanism of Coal-Rock Composite under Uniaxial Load

Study on the strength deterioration characteristic and damage model of coal pillar dams with repeated water immersion in underground reservoirs

Influence characteristics and macro-meso mechanism of pressure immersion time on tensile properties for coal materials

Effects of Water on Mechanical Behavior and Acoustic Emission Characteristics of Coal in Brazilian Tests

Experimental Study on the Damage and Deterioration Behaviour of Deep Soft Rock under Water-Rock Interaction

Study on time-effect to the strength deterioration of carbonaceous mudstone under water-rock interaction

Study on the Effect of Dry–Wet Cycles on Dynamic Mechanical Properties of Sandstone Under Sulfuric Acid Solution

The Effect of Chemical Erosion on Mechanical Properties and Fracture of Sandstone under Shear Loading: an Experimental Study.

Experimental study on the deterioration of mechanical properties of sandy mudstone under different water-gas interactions

Progressive failure characteristics and water-induced deterioration mechanism of fissured sandstone under water–rock interaction

Experimental Study on Uniaxial Compression Failure Characteristics and Mechanical Properties of Composite Aquiclude Rock