Microstructural, spectroscopic and mechanical properties of hot-pressed Er:SrF2 transparent ceramics
Zuodong Liu,Yumeng Ji,Chunyan Xu,Yuqing Wang,Yang Liu,Qilong Shen,Guoqiang Yi,Yongsheng Yu,Bingchu Mei,Peng Liu,Qiangshan Jing
DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.03.041
IF: 5.7
2021-08-01
Journal of the European Ceramic Society
Abstract:Raw SrF2 powders were synthesized by the chemical precipitation method, and the mean particle size was 58.48 nm. Er:SrF2 transparent ceramics were obtained by hot-pressed (HP) technique, and the effect of ErF3 levels on the transparency, microstructure, luminescence spectroscopic and microhardness were studied. The ratio of emission intensities R (Red/Green) increased with the ErF3 doping levels. The addition of ErF3 was found effectively to reduce grain size and has a positive effect on improving the microhardness. The SrF2 ceramic doped with 5 wt.% ErF3 (2 mm thick) showed the best optical transparency, the transmittance at 500 nm and 1200 nm are 87.9 % and 89.5 %, respectively. The average grain size, Vickers hardness (Hv), and fracture toughness (KIC ) for the SrF2 ceramic were 21.1 ± 4.5 μm, 1.73 ± 0.04 GPa, and 0.52 ± 0.08 MPa·m1/2, respectively.
materials science, ceramics