Abstract:Sintering is a process of bonding between solid particles which typically occurs under high temperature. Currently, simulation of sintering process is mainly concentrated on the single-phase polycrystalline materials. As there are a lot of materials which are biphasic porous system, it is of practical significance to simulate the microstructural evolution of biphasic porous system during sintering process. In this work, a new phase field model is established to simulate sintering process in biphasic porous system. The evolution of the component is governed by Cahn-Hilliard equation, while the orientation field by the time-dependent Allen-Cahn equation. A function is established to describe the relationship between atomic diffusion coefficient and grain boundary diffusion, surface diffusion and volume diffusion. A group of phenomenological coefficients are obtained by analyzing the characteristic of the phase-field model. The simulation results show that the new phase-field model can effectively simulate the sintering process in biphasic porous system. The formation and growth of sintering neck, the seal spheroidization and disappearance of pores as well as the mergence and growth of grains are observed during simulation. The sintering necks between the parent phase and the second phase grow very fast at the early stage of simulation, while at the late stage, because of the pinning effect, the growth rate of the sintering neck slows down obviously, pores become isolated by the grains, and its shape change from concave to convex, the relative small pores are eliminated, which leads to densification. As the sintering proceeds, the grain size of the second phase gradually decreases and the parent-phase grains are wrapped by the second-phase grains. Because of the pinning effect of the second phase, the migration rate of the grain boundary of the parent phase is restrained. The evolution course of pores depends largely on the interaction between the second phase and the pores. The evolution rate of pores is quantitatively compared between the biphasic porous system and the single-phase system. In the case of biphasic porous system, the evolution rate of pores is slower than that in single-phase system. The simulating growth exponents of the parent phase are calculated with different volume fractions of the second phase. As the volume fractions of the second phase increase from 15% to 25%, the grain growth exponent changes from 2.9 to 3.4.

Electrochemical grand potential-based phase-field simulation of electric field-assisted sintering

Phase-Field Simulation of Process in Sintering Ceramics

A defect-chemistry-informed phase-field model of grain growth in oxide electroceramics

Flash sintering can induce an anisotropic microstructure in ceramics. A phase field modeling insight

An improved grand-potential phase-field model of solid-state sintering for many particles

Phase-field modeling of non-isothermal grain coalescence in the unconventional sintering techniques

Phase Field Simulations of the Poling Process and Nonlinear Behavior of Ferroelectric Polycrystals with Semiconducting Grain Boundaries

2-D Phase-Field Simulation of Pore Evolution in Sintering Ceramics

Phase Field Modeling of Pressure Induced Densification in Solid Electrolytes

Phase field simulation of sintering process in biphasic porous material

A general thermodynamically consistent phase-field-micromechanics model of sintering with coupled diffusion and grain motion

Ionomigration of Neutral Phases in Ionic Conductors

Phase Field Simulations of the Sintering Process of UO2

Simulating Effects of Pores on Grain Growth during Final Stage of Sintering in Ceramics through Phase Field Modeling

Thermo-electro-mechanical modeling of spark plasma sintering processes accounting for grain boundary diffusion and surface diffusion

Phase-field Simulation of Sintering Process of Ceramic Composite Fuel

A thermodynamically consistent phase‐field‐micromechanics model of sintering with coupled diffusion and grain motion

Fully Coupled Thermal–electric-Sintering Simulation of Electric Field Assisted Sintering of Net-Shape Compacts

Enhanced Sintering Kinetics in Aluminum Alloy Powder Consolidated Using Dc Electric Fields

Unravelling densification during sintering by multiscale modelling of grain motion

Uncovering electromigration effect on densification during electrical field assisted sintering