Abstract:Sintering is a process of bonding between solid particles which typically occurs under high temperature. Currently, simulation of sintering process is mainly concentrated on the single-phase polycrystalline materials. As there are a lot of materials which are biphasic porous system, it is of practical significance to simulate the microstructural evolution of biphasic porous system during sintering process. In this work, a new phase field model is established to simulate sintering process in biphasic porous system. The evolution of the component is governed by Cahn-Hilliard equation, while the orientation field by the time-dependent Allen-Cahn equation. A function is established to describe the relationship between atomic diffusion coefficient and grain boundary diffusion, surface diffusion and volume diffusion. A group of phenomenological coefficients are obtained by analyzing the characteristic of the phase-field model. The simulation results show that the new phase-field model can effectively simulate the sintering process in biphasic porous system. The formation and growth of sintering neck, the seal spheroidization and disappearance of pores as well as the mergence and growth of grains are observed during simulation. The sintering necks between the parent phase and the second phase grow very fast at the early stage of simulation, while at the late stage, because of the pinning effect, the growth rate of the sintering neck slows down obviously, pores become isolated by the grains, and its shape change from concave to convex, the relative small pores are eliminated, which leads to densification. As the sintering proceeds, the grain size of the second phase gradually decreases and the parent-phase grains are wrapped by the second-phase grains. Because of the pinning effect of the second phase, the migration rate of the grain boundary of the parent phase is restrained. The evolution course of pores depends largely on the interaction between the second phase and the pores. The evolution rate of pores is quantitatively compared between the biphasic porous system and the single-phase system. In the case of biphasic porous system, the evolution rate of pores is slower than that in single-phase system. The simulating growth exponents of the parent phase are calculated with different volume fractions of the second phase. As the volume fractions of the second phase increase from 15% to 25%, the grain growth exponent changes from 2.9 to 3.4.

2-D Phase-Field Simulation of Pore Evolution in Sintering Ceramics

Phase field simulation of sintering process in biphasic porous material

Monte-Carlo simulation of isotropic and anisotropic grain growth in liquid phase sintered ceramics

Phase field modeling of the effect of porosity on grain growth kinetics in polycrystalline ceramics

Monte-Carlo simulation of grain growth in Vapor-Liquid-Solid phase sintered material

Phase-field modeling of non-isothermal grain coalescence in the unconventional sintering techniques

A general thermodynamically consistent phase-field-micromechanics model of sintering with coupled diffusion and grain motion

Phase-field Simulation of Sintering Process of Ceramic Composite Fuel

A Phase-Field-Micromechanics Study on the Microstructural Evolution during Viscous Sintering

Multi-Phase Field Simulation of Grain Growth in Multiple Phase Transformations of A Binary Alloy

Three-dimensional non-isothermal phase-field modeling of microstructure evolution during selective laser sintering

Unravelling densification during sintering by multiscale modelling of grain motion

Phase-Field Modeling of Stored-Energy-Driven Grain Growth with Intra-Granular Variation in Dislocation Density

An improved grand-potential phase-field model of solid-state sintering for many particles

The atomic scale mechanisms of the interaction between pore and grain boundary during sintering

Revealing process and material parameter effects on densification via phase-field studies

Multi-phase Field Simulation of Multi-Grain Peritectic Transition in Multiple Phase Transformation

Electrochemical grand potential-based phase-field simulation of electric field-assisted sintering

Phase Field Simulations of the Sintering Process of UO2

A thermodynamically consistent phase‐field‐micromechanics model of sintering with coupled diffusion and grain motion