Abstract:This paper investigates the machinability and microscopic surface damage mechanisms of aluminum alloy 7075 subjected to different heat treatment processes during micro-cutting. Focusing on T6 and T73 heat-treated aluminum alloy 7075, the study employs a combination of experiments and simulations to analyze micro-cutting surface morphology, cutting forces, microstructure evolution, residual stress, and damage characteristics. The findings reveal that micro-cutting of aluminum alloy 7075 after T6 heat treatment exhibits no apparent speed sensitivity in the primary cutting force, while T73 heat treatment demonstrates noticeable speed sensitivity. The surface microscopic damage during micro-cutting is influenced by both cutting speed and depth, resulting in distinct forms and degrees of damage under varying conditions.An analysis of the residual compressive stress field indicates that the magnitude of residual compressive stress on the micro-cutting surface determines crack initiation, and the maximum depth of residual compressive stress dictates crack propagation. Microscopic damage in T6 heat-treated aluminum alloy 7075 predominantly occurs in the second and third deformation zones, while T73 heat treatment leads to most damage in the third deformation zone. Notably, crack propagation is evident in T6 heat treatment at any cutting speed with a cutting depth of 150 μm, whereas it is inconspicuous in T73 heat treatment at cutting speeds below 540 m/min. Furthermore, at cutting speeds below 540 m/min and a cutting depth of 150 μm, T6 heat-treated micro-cutting is prone to oxidative wear. In contrast, at a cutting speed of 72 m/min and a cutting depth of 150 μm, the predominant wear form in T73 heat-treated micro-cutting is oxidation wear.This study underscores the intricate interplay between heat treatment processes, cutting conditions, and microscopic damage in aluminum alloy 7075 micro-cutting. The nuanced insights provided contribute to a deeper understanding of the machining characteristics of this alloy, paving the way for improved processing methodologies.

Investigation of surface damage mechanisms in milling heat-treated pine wood

High-Pressure Treatment Effects on Density Profile, Surface Roughness, Hardness, and Abrasion Resistance of Paulownia Wood Boards

Characterization and Prediction of Mechanical and Chemical Properties of Luanta Fir Wood with Vacuum Hydrothermal Treatment

The influence of the thermal modification of pine (Pinus sylvestris L.) wood on the creation of fine dust particles in plane milling: Fine dust creation in the plane milling of thermally modified pine wood

Surface roughness and chip morphology of wood-plastic composites manufactured via high-speed milling

Effects of Milling Methods on Cutting Performance of Wood–Plastic Composites Based on Principal Component Analysis

Effect of heat treatment on bonding performance of poplar via an insight into dynamic wettability and surface strength transition from outer to inner layers

Morphology, mechanism and kerf variation during CO2 laser cutting pine wood

Cutting Force and Surface Roughness during Straight-Tooth Milling of Walnut Wood

Investigation of Roughness and Adhesion Strength Properties of Pine and Poplar Wood Heat Treated in Air and under Vacuum after Artificial Aging

Machinability of Different Wood-Plastic Composites during Peripheral Milling

Comparison of the chemical and micromechanical properties of Larix spp. after eco-friendly heat treatments measured by in situ nanoindentation

Effect of Low-Thermal Treatment on the Particle Size Distribution in Wood Dust after Milling

Characterisation of rotary friction welding process and mechanism of heat-treated Scotch pine

Preparation and Characterization of Heat-Treated Douglas Fir Wood with Core–Shell Structure

Moisture changes and surface checking development during drying of Masson pine wood

Intenzitet toplinske modifikacije topolovine. Dio 2

Machinability of wood-plastic composites from the CNC milling process using the Box-Behnken design and response surface methodology for building applications

The Effect of Steaming Beech, Birch and Maple Woods on Qualitative Indicators of the Surface

Investigation on the damage mechanism of micro-cutting surface layer of aluminum alloy 7075 with different heat treatment processes

Study on the effect of micro‐texture coating tool on the milling quality of wood surface