Abstract:As an environmentally friendly polymer material, isotactic polypropylene (pp), possesses excellent dielectric properties while it can be recycled, so it is regarded as having promising application prospects in the field of high voltage power cable insulation. However, the increasing operating voltage rating also puts higher demands on its insulation reliability. In this study, an intrinsic modulation method for pp insulation based on mesoscopic structure modulation by crystal phase transformation is proposed, which not only effectively improved the dielectric properties but also enhanced the mechanical toughness synergistically. The transformation of the crystal phase from the α-crystal to β-crystal within the PP/β-NA samples was successfully achieved by the solution blending method. The crystallization efficiency is greatly promoted, and the crystal structure is further improved at the same time. As the proportion of β-crystal gradually increases, the elongation at break could be raised to 451% at maximum. The difference in dielectric parameters between the crystal and amorphous regions is caused by the variation in the molecular chain density and arrangement, which is also the main reason for further triggering the high-intensity partial discharges and large-area electrical tree degradation in the amorphous region between the spherocrystal boundary at the mesoscopic scale. Compared with the premodification, the introduction of β-crystal effectively alleviated the problem of electric field distortion. Among them, the modified PP-β-0.2 sample had 16.8 kV/mm lower maximum electric field, 2258 fewer total partial discharges, 420 μm2 less electrical tree cumulative damage area, and 28% higher breakdown strength. Accordingly, it also has promising applications in the manufacturing of high-voltage power cable insulation.

Polypropylene Films for HVDC Capacitors with Enhanced Dielectric Performance by Irradiation Crosslinking Modification

Dielectric Performance Improvement of Polypropylene Film Modified by γ-ray Irradiation for HVDC Capacitors

Dielectric Properties of Cross-linked Polypropylene by Gamma-ray Irradiation for Film Capacitor

An Investigation on the Evolution of Insulation Performance of BOPP Films for Power Capacitors under Multi Physical Fields Aging

Enhanced dielectric and energy storage properties of polypropylene by high-energy electron beam irradiation

Improved Breakdown Strength of Polypropylene Film by Polycyclic Compounds Addition for Power Capacitors

Dielectric Property and Breakdown Strength Performance of Long-Chain Branched Polypropylene for Metallized Film Capacitors

Dielectric properties dependent on crystalline morphology of PP film for HVDC capacitors application

Improved Insulation Properties of Polypropylenes in HVDC Cables Using Aqueous Suspension Grafting

Breakdown strength improvement of polypropylene by introducing long-chain branched structures for film capacitors

Enhanced Breakdown Strength of Polypropylene Film by Molecular Semiconductor Addition

Enhanced Dielectric Breakdown Property of Polypropylene Based on Mesoscopic Structure Modulation by Crystal Phase Transformation for High Voltage Power Cable Insulation

Polyimide Dielectrics with Cross-linked Structure for High-Temperature Film Capacitors

Ultrahigh Energy Density Achieved at High Efficiency in Dielectric Capacitors by Regulating Α‐phase Crystallization in Polypropylene Films with Fluorinated Groups

Dielectric Properties Improvement of Grafting-Modified Polypropylene by Silane for HVDC Cable Insulation

Improving the Energy Storage Performance of a Chlorinated Poly(vinyl Chloride) Film at Elevated Electric Field and Temperature Via a Simple Annealing Process

High-Temperature Performance of Dielectric Breakdown in BOPP Capacitor Film Based on Surface Grafting

Improvement of Dielectric Properties of Polypropylene Films for capacitors Based on Metal-Ash Suppression

Effect of Stretching Mode on Energy Storage Properties of Grafted Polypropylene Dielectric Films

Crystallisation regulation of long‐chain branched polypropylene on dielectric performance and energy density for metallised film capacitors

Greatly enhanced breakdown strength and energy density in ultraviolet-irradiated polypropylene