Microstructure and fracture behavior of 90W-7Ni-3Fe alloy fabricated by laser directed energy deposition
Chao Wei,Han Ye,Zhuang Zhao,Jingang Tang,Xianfeng Shen,Guomin Le,Kun Ye,Fangbin Le
DOI: https://doi.org/10.1016/j.jallcom.2021.158975
IF: 6.2
2021-06-01
Journal of Alloys and Compounds
Abstract:<p>Additive manufacturing provides a novel route to manufacture tungsten-based alloy components with complex geometries. In this study, a laser directed energy deposition (LDED) additive manufacturing technique is introduced to fabricate 90W-7Ni-3Fe alloy, and the microstructure and mechanical properties are systematically investigated. To facilitate comparison with conventional processing methods, the 90W-7Ni-3Fe alloy is also processed by liquid phase sintering (LPS). The results show that the microstructure of LDEDed samples consisting of matrix (M) phase and W particles phase exhibits significant heterogeneity along the building direction, which is related to the complicated thermal history experienced. As a result, the tensile properties also show a variation at different build heights. The tensile strengths in the bottom and middle regions are better to the top and comparable to the LPSed samples, but overall the plasticity is poor. The tensile fracture shows a mixed fracture characteristic (i.e. W particle cleavage fracture, W-M interfacial debonding, matrix phase rupture, and W-W inter particle fracture), and crack initiations mostly originate from the W-M interface and micro-voids. Besides, benefitting from the higher W solubility in the matrix and smaller W grain size, the hardness of the matrix phase and W particles in the LDEDed samples are higher than those in the LPSed samples. The fundamental understanding will provide a theoretical basis for future fabrication and post treatment to enhance the mechanical properties of LDEDed tungsten-based alloys.</p>
materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering