Abstract:Conventional lead halide Perovskite Solar Cells (PSC) have toxicity and stability issues. Therefore it is crucial to look for lead-free inorganic perovskite material, such as La 2 NiMnO 6 , RbGeI 3 , CsGeI 3 , Cs 2 AgBiBr 6 and others. There has been much work in the area of PSC using Cs 2 AgBiBr 6 as an absorber, However, due to some critical issues of Cs 2 AgBiBr 6 , such as the film's broad bandgap which limits its capacity to absorb light, leading to corresponding PSC being typically restricted to around 4% efficiency. In this work, a lead-free PSC with Cs 2 AgBiBr 6 as the absorber has been engineered to resolve the issues by considering the experimental works in the literature to increase efficiency to 6.3% from a maximum 4.48% as reported in the literature. The output response of both design approaches, as well as the potentiality of future designs, are investigated in terms of output parameters, i.e., Open-Circuit Voltage (V OC ), Short-circuit Current density (J SC ), Fill Factor (FF), and Power Conversion Efficiency (PCE). Besides, this work also focuses on eliminating Sulphur from ETLs by working on several sulphides and oxide-based Electron Transport Layers (ETLs). Several solar cell device structures have been analyzed for their numerical simulation with sulphide ETLs such as ZnS, WS 2 , CdS, CdZnS and oxide ETLs such as TiO 2 , ZnO, WO 3 , IGZO. To progress towards eco-friendly PSCs, alternatives to sulphide, several transparent oxide alternatives (TiO 2 , ZnO, WO 3 , IGZO) have been considered as ETLs. These ETLs have been further doped with Mg to enhance the performance parameters. Mg-doped based ETLs additionally behaving as Hole-blocking layers (HBLs) in corresponding PSCs leads to comparatively significantly better performance in a number of aspects, including V OC (1.21 V), PCE (5.74%), J SC , and FF. The solar cell design has been optimized for high performance through various techniques such as varying ETL and absorber thickness, interface defects variation, series/shunt resistance, band to band recombination, and bandgap grading through doping. Also an effective electric field (E eff ) that depicts the conduction's impact has been calculated. Best performing device among different designs among PSCs with sulphide and oxide-based ETLs has been ZnS/Cs 2 AgBiBr 6 /Cu 2 O (PCE-6.3%) and Mg-doped (20%) ZnO/Cs 2 AgBiBr 6 /Cu 2 O (PCE-5.74%). These results may help researchers in their efforts to find the best-suited materials for the design of high-performance PSCs in the future.

Improvement of perovskite solar cells efficiency with safe and sustainable by design (SSbD) silver-doped zinc oxide nanoparticles

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Efficient and stable perovskite solar cells based on insulating polymer modified ZnO nanoparticles

Performance Enhancement of Perovskite Solar Cells by Doping Non-Toxic Multifunctional Natural Sodium Lignosulfonate into SnO2

Design and performance exploration of Pb-free low-cost all-inorganic perovskite-inspired CuAgBi2I8 solar cells: Theoretical approach

Bidirectional Targeted Therapy Enables Efficient, Stable, and Eco‐Friendly Perovskite Solar Cells

Conductive chelating agent treating electron transfer layer for environment-friendly and efficient perovskite solar cells

In situ Ligand‐Managed SnO2 Electron Transport Layer for High‐Efficiency and Stable Perovskite Solar Cells

Controlling surface morphology of Ag-doped ZnO as a buffer layer by dispersion engineering in planar perovskite solar cells

Multi-cation hybrid stannic oxide electron transport layer for high-efficiency perovskite solar cells

Polysaccharide Modified SnO2 for Highly Efficient Perovskite Solar Cells

Enhancing the Efficiency and Stability of Perovskite Solar Cells through Gradient Energy Band Tin Oxide Electron Transport Layer Design with Graphene Quantum Dot Incorporation

Zirconium acetate stabilized tin dioxide colloidal quantum dots as multifunctional electron transporting layer for efficient and stable perovskite solar cells

Enhanced Charge Transport and Interface Passivation in Efficient Perovskite Solar Cells Using Sulfur‐Doped Graphite Carbon Nitride‐Modified SnO 2 ‐Based Electron Transport Layers

Synergistical Transition Metal Ion Co-Doping and Multiple Functional Additive Passivation for Realizing 25.30% Efficiency Perovskite Solar Cells

Device engineering of double perovskite based solar cells towards high-performance, eco-friendly solar cells

Efficient and environmental-friendly perovskite solar cells via embedding plasmonic nanoparticles: an optical simulation study on realistic device architecture

High‐Performance Perovskite Solar Cells with Zwitterion‐Capped‐ZnO Quantum Dots as Electron Transport Layer and NH4X (X = F, Cl, Br) Assisted Interfacial Engineering

Synergetic Optimization of Upper and Lower Surfaces of the SnO2 Electron Transport Layer for High-Performance N-I-p Perovskite Solar Cells

Manipulating SnO 2 Growth for Efficient Electron Transport in Perovskite Solar Cells

Diffusion-enhanced efficiency of perovskite solar cells