Abstract:This study optimizes electrolyte pH to extend cycling by influencing two‐electron MnO2/Mn2+ reaction for high voltage operation. It integrates a carbon‐based current collector with a high density of structural defects for enhanced cycling. With impressive performance and minimal decay over 400 cycles in a flooded stack‐type cell architecture, these batteries present a promising practical solution for large‐scale energy storage applications. Zn–MnO2 batteries offer cost‐effective, eco‐friendly, and efficient solutions for large‐scale energy storage applications. However, challenges, like irreversible cathode reactions, prolonged cyclability, and electrolyte stability during high‐voltage operations limit their broader application. This study provides insight into the charge–discharge process through in situ deposition of active β‐MnO2 nanoflakes on a carbon‐based current collector. The study elucidates the effect of pH and electrolyte concentration on chemical conversion reactions with Zn, in particular focus on their impact on the two‐electron MnO2/Mn2+ reaction crucial for high voltage operation. The electrolyte, characterized by being relatively lean in Mn2+ and with a targeted low pH, enables extended cycling. This research achieves greater cycling durability by integrating a carbon‐based cathode current collector with high density of structural defects in combination with cell architectures suitable for large‐scale energy storage. A flooded stack‐type Zn–MnO2 battery prototype employing the optimized electrolyte demonstrates a high discharge voltage (≈2 V) at a substantial discharge current rate of 10 mA cm−2. The battery exhibits an impressive areal capacity of ≈2 mAh cm−2, maintaining ≈100% capacity retention over 400 cycles. This research establishes a promising practical, and cost‐effective cathode‐free design for Zn–MnO2 batteries, that minimizes additional processing and assembly costs.

Charge–Discharge Performances and Mechanisms of Zn-Ion Batteries with β-MnO2, γ-MnO2, and Mn2O3 Positive Electrodes

Reaction mechanism and electrochemical performance of manganese (II) oxide in zinc ion batteries

Valence Engineering via In Situ Carbon Reduction on Octahedron Sites Mn3O4 for Ultra‐Long Cycle Life Aqueous Zn‐Ion Battery

Zn‐doped hollow cubic MnO2 as a high‐performance cathode material for Zn ion batteries

Charge Storage Mechanism of MOF-derived Mn 2 O 3 As High Performance Cathode of Aqueous Zinc-Ion Batteries

MnO 2 @Fe 2 O 3 Cathode for Aqueous Zinc/Manganese Batteries: Enhanced Discharge Capacity and Stability through Forming FeMnO 3

A Comparison Study of MnO2 and Mn2O3 As Zinc-Ion Battery Cathodes: an Experimental and Computational Investigation

Co2+/3+/4+‐Regulated Electron State of Mn‐O for Superb Aqueous Zinc‐Manganese Oxide Batteries

Unveiling the Intricate Intercalation Mechanism in Manganese Sesquioxide as Positive Electrode in Aqueous Zn‐Metal Battery

Co 2+/3+/4+ ‐Regulated Electron State of Mn‐O for Superb Aqueous Zinc‐Manganese Oxide Batteries

Charge storage mechanism of MOF-derived Mn2O3 as high performance cathode of aqueous zinc-ion batteries

Inhibition of Manganese Dissolution in Mn 2 O 3 Cathode with Controllable Ni 2+ Incorporation for High‐Performance Zinc Ion Battery

Reaction mechanisms for electrolytic manganese dioxide in rechargeable aqueous zinc-ion batteries

Inhibition Of Manganese Dissolution In Mn2o3 Cathode With Controllable Ni2+ Incorporation For High-Performance Zinc Ion Battery

Acidity‐Aided Surface Modification Strategy to Enhance In Situ MnO2 Deposition for High Performance Zn‐MnO2 Battery Prototypes

Enriching Oxygen Vacancy Defects Via Ag–O–Mn Bonds for Enhanced Diffusion Kinetics of Δ-Mno2 in Zinc-Ion Batteries

Enriching Oxygen Vacancy Defects via Ag–O–Mn Bonds for Enhanced Diffusion Kinetics of δ-MnO 2 in Zinc-Ion Batteries

Manipulating Oxygen Vacancies by K+ Doping and Controlling Mn2+ Deposition to Boost Energy Storage in β-MnO2

Unravelling the Mechanism of Rechargeable Aqueous Zn-MnO2 Batteries: Implementation of Charging Process by Electrodeposition of MnO2

Cobalt-doped Manganese (III) oxide cathode materials with enhanced electrochemical performance for aqueous zinc-ion batteries

EQCM study of intercalation processes into electrodeposited MnO2 electrode in aqueous zinc-ion battery electrolyte