Abstract:This study explores the feasibility of utilizing pervious concrete (PC) incorporating diverse lightweight aggregates (LWAs) integrated with phase change materials (PCM) for applications where forced air cooling would be advantageous. The use of such a component provides latent and sensible heat that can cool forced air applications, offsetting ambient temperature increases that occur during the day. Macro- and microencapsulation techniques were used to incorporate inorganic PCM in the PC. The macro-encapsulation technique involved enclosure of PCM within a stable shell prior to addition into the concrete. The microencapsulation technique involved the impregnation of PCM into porous lightweight aggregate. To overcome the PCM reaction with the concrete constituents, an epoxy coating was utilized. The design of the PCM concrete mix and comprehensive laboratory assessment of porosity, water permeability, PCM absorption capacity, compressive strength, and microstructure of the LWAs are detailed. The test results indicate that LWAs have high PCM impregnation rates ranging from 32 % to 57 % by volume. The compressive strengths of PC using LWAs were reduced by 25 % to 65 % when using microencapsulation. The use of microencapsulation was found to reduce the pressure drop under air flow due to the increase in aggregate size as a result of the coating thickness. PCM-PC with a shell thickness of 100 mm, resulted in a pressure drop of less than 100 Pa at a velocity of 0.35 m/s. The use of macro-encapsulated PCM in PC was sensitive to the phase of the PCM, where the liquid phase reduced the compressive strength by 67 %. The failure occurred within the macro-encapsulated PCM at the liquid phase temperatures and at the interface between the encapsulated PCM at solid phase temperatures. The heat transfer provided by the LWA infused PCM when used in a packed aggregate bed or in PC, was shown to match expected latent and sensible heat estimates based on the thermal properties of the materials. This systematic investigation provides valuable insights into LWAs and PCM performance in pervious concrete, offering a comprehensive understanding of their interaction in cooling applications.

Thermal performance of a solar energy storage concrete panel incorporating phase change material aggregates developed for thermal regulation in buildings

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Study on the heat transfer of a concrete wall outfitted with phase change materials

Development of Concrete Façade Sandwich Panels Incorporating Phase Change Materials

A Review of Recent Improvements, Developments, Effects, and Challenges on Using Phase-Change Materials in Concrete for Thermal Energy Storage and Release

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

The thermal performances of cement-based materials with different types of microencapsulated phase change materials

Improving thermal performance of a passive ventilation and cooling system by integrating a phase-change material: Dynamic characteristics and parametric examinations

Preparation and performance study of a novel radiant panel for thermal and cooling storage with phase change materials

A foamed cement blocks with paraffin/expanded graphite composite phase change solar thermal absorption material

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones

Application of Monodisperse Encapsulated Phase Change Materials in Building Thermal Energy Storage

Energy Storage in Lightweight Aggregate and Pervious Concrete Infused with Phase Change Materials

Study on properties of phase change foam concrete block mixed with paraffin / fumed silica composite phase change material

Structural-functional integrated concrete with macro-encapsulated inorganic PCM

Phase change materials embedded in expanded clay aggregates to develop energy storage concrete: A review

Thermal performance and optimization of a casing pipe solar energy storage floor with phase change material