Abstract:Improper electronic waste management in the world especially in developing countries such as Iran has resulted in environmental pollution. Copper, nickel, and manganese are from the most concerned soil contaminating heavy metals which found in many electronic devices that are not properly processed. The aim of this study was to investigate the biological removal of copper, nickel, and manganese by Bacillus species isolated from a landfill of electronic waste (Zainal Pass hills located in Isfahan, Iran) which is the and to produce nanoparticles from the studied metals by the isolated bacteria. The amounts of copper, nickel, and manganese in the soil was measured as 1.9 × 10 4 mg/kg, 0.011 × 10 4 mg/kg and 0.013 × 10 4 mg/kg, respectively based on ICP-OES analysis, which was significantly higher than normal (0.02 mg/kg, 0.05 mg/kg, and 2 mg/kg, respectively. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) of metals on the bacterial isolates was determined. The biosorption of metals by the bacteria was evaluated by inductively coupled plasma optical emission spectroscopy (ICP-OES). The metal nanoparticles were synthetized utilizing the isolates in culture media containing the heavy metals with the concentrations to which the isolates had shown resistance. X ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used for the evaluation of the fabrication of the produced metal nanoparticles. Based on the findings of this study, a total of 15 bacterial isolates were obtained from the soil samples. The obtained MICs of copper, nickel, and manganese on the isolates were 40–300 mM, 4–10 mM, and 60–120 mM, respectively. The most resistant isolates to copper were FM1 and FM2 which were able to bio-remove 79.81% and 68.69% of the metal, respectively. FM4 and FM5 were respectively the most resistant isolate to nickel and manganese and were able to bio-remove 86.74% and 91.96% of the metals, respectively. FM1, FM2, FM4, and FM5 was molecularly identified as Bacillus cereus , Bacillus thuringiensis , Bacillus paramycoides , and Bacillus wiedmannii , respectively. The results of XRD, SEM and EDS showed conversion of the copper and manganese into spherical and oval nanoparticles with the approximate sizes of 20–40 nm. Due to the fact that the novel strains in this study showed high resistance to copper, nickel, and manganese and high adsorption of the metals, they can be used in the future, as suitable strains for the bio-removal of these metals from electronic and other industrial wastes.

Live Multi-metal Tolerant Bacterial Biofilm on Polyurethane Sponge for Low-cost Bioremediation of Heavy Metal from Small-scale Industry Wastewater

Removal of Heavy Metals by Pseudomonas sp. – Model Fitting and Interpretation

Multimetal bioremediation from aqueous solution using dead biomass of Mucor sp. NRCC6 derived from detergent manufacturing effluent

Exploring bioleaching potential of indigenous Bacillus sporothermodurans ISO1 for metals recovery from PCBs through sequential leaching process

Heavy metal application of response surface optimized-lipopeptide biosurfactant produced by Pseudomonas aeruginosa strain CGA-02 in low-cost substrate

An assessment of metal absorption competence of indigenous metal tolerant bacterial species- an in-vitro study

Biosorption of copper, nickel, and manganese as well as the production of metal nanoparticles by Bacillus species isolated from soils contaminated with electronic wastes

Bioremoval of Different Heavy Metals in Industrial Effluent by the Resistant Fungal Strain Aspergillus niger

Metal- Pseudomonas veronii 2E Interactions as Strategies for Innovative Process Developments in Environmental Biotechnology

Greener Method for the Removal of Toxic Metal Ions from the Wastewater by Application of Agricultural Waste as an Adsorbent

Novel bio-filtration method for the removal of heavy metals from municipal solid waste

Bioremediation of Selected Heavy Metals from Industrial Influent Collected at Wupa Wastewater Treatment Plant, Abuja

Metal tolerance and biosorption of Pb ions by Bacillus cereus RMN 1 (MK521259) isolated from metal contaminated sites

Low cost biosorbents from fungi for heavy metals removal from wastewater

A Study of the Suitability of Microbial Cells for the Biosorption and Bioaccumulation of Heavy Metal Removal

From industrial sites to environmental applications with Cupriavidus metallidurans

Biosorption of nickel, cobalt, zinc and copper ions by Serratia marcescens strain 16 in mono and multimetallic systems

Microbial potentiometric sensor technology for real-time detecting and monitoring of toxic metals in aquatic matrices

Microbial Strategies for Heavy Metal Removal from Industrial Wastewater

Isolation and identification of bacteria from solid waste deposit sites for the degradation of heavy metals

Production of Biosurfactant Produced from Used Cooking Oil by Bacillus sp. HIP3 for Heavy Metals Removal