Abstract:The rapid and accurate detection of hydrogen peroxide (H2O2) has recently been a fascinating research topic in electrochemical sensing. Herein, spinel CuMn2O4 nanoflakes were synthesized through coprecipitation and pyrolysis methods and then drop-coated onto the surface of a bare glassy carbon electrode (GCE), successfully generating an enzymatic-free electrochemical sensor (CuMn2O4/GCE) for good amperometric detection ability of H2O2. In comparison with the reported spinel AB2O4-based electrocatalysts in a phosphate buffer solution, the CuMn2O4/GCE sensor exhibits a high sensitivity of 3.420 A M–1 cm–2 and a low detection limit of 12 nM. This excellent sensing performance is mainly derived from the inherent porous structure and the large electrochemical active area of spinel CuMn2O4 nanoflakes, as well as the synergistic effect between Cu and Mn that facilitates electron transfer and increases active sites. Especially, the high contents of Cu+ and Mn3+ ions in the nanocatalyst are useful for promoting the capture and reduction of trace H2O2. In addition, the CuMn2O4/GCE sensor presents a satisfactory recovery in monitoring H2O2 derived from rat serum, commercial milk, and disinfectors, indicating its potential applications in related environmental, food, and biological fields.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00898?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00898</a>.Instruments; ESR spectrum of CuMn2O4; XRD patterns of CuO and Mn2O3 samples; XPS full spectra of CuO, Mn2O3, and CuMn2O4; high-resolution XPS spectra of CuO and Mn2O3 samples; SEM images of products calcined at different temperatures and their electrochemical H2O2 sensing performance; TEM images and XRD pattern of precursor; typical current–time curves of CuMn2O4/GCE with consecutive injection of 0.05 mM H2O2 into 0.05 M PBS at different pH values; i–t curves of CuO/GCE and Mn2O3/GCE with consecutive injection of H2O2 into 0.05 M PBS and their respective fitting curves; Table S1, two reference CuMn2O4 composites by doping CuO and MnO2 of corresponding synthesis and characterizations and their electrochemical H2O2 sensing performance; Table S2, TEM images and XPS spectra of CuMn2O4 nanomaterial after stability tests (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00898/suppl_file/an1c00898_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Direct Growth of Poly-Glutamic Acid Film on Peroxidase Mimicking PCN-222(Mn) for Constructing a Novel Sensitive Nonenzymatic Electrochemical Hydrogen Peroxide Biosensor

Electrodeposition of Monodispersed Cu Nanoparticles on Poly-P-Aminobenzene Sulfonic Acid Functionalized Glassy Carbon Electrode and the Electrocatalytic Reduction Toward H2o2

A Hydrogen Peroxide Sensor Prepared By Electropolymerization Of Pyrrole Based On Screen-Printed Carbon Paste Electrodes

A Highly Sensitive <tex>$\boldsymbol{O}_{2}{}^{\bullet-}$</tex> Biosensor Based on PEDOT:PSS/SA Composite Conductive Hydrogel

CuMn 2 O 4 Spinel Nanoflakes for Amperometric Detection of Hydrogen Peroxide

Amplified Electrochemical Hydrogen Peroxide Sensing Based on Cu-Porphyrin Metal–Organic Framework Nanofilm and G-Quadruplex-Hemin DNAzyme

Silver Nanoparticle-Enzyme Composite Films for Hydrogen Peroxide Detection

Carbon-Doping Mesoporous β-Mo 2 C Aggregates for Nanomolar Electrochemical Detection of Hydrogen Peroxide

Dual-function Glucose and Hydrogen Peroxide Sensors Based on Copper-embedded Porous Carbon Composites

MOF-Derived Bimetallic CoFe-PBA Composites as Highly Selective and Sensitive Electrochemical Sensors for Hydrogen Peroxide and Nonenzymatic Glucose in Human Serum

Hydrogen Peroxide Electrochemical Detection for the Development of Protein Film-Modified Sensor

Novel neuron-network-like Cu–MoO2/C composite derived from bimetallic organic framework for highly efficient detection of hydrogen peroxide

Ag Functionalized Molybdenum Disulfide Hybrid Nanostructures for Selective and Sensitive Amperometric Hydrogen Peroxide Detection

Nonenzymatic sensing of hydrogen peroxide using a glassy carbon electrode modified with graphene oxide, a polyamidoamine dendrimer, and with polyaniline deposited by the Fenton reaction

A Glassy Carbon Electrode Modified with a Nanocomposite Consisting of Carbon Nanohorns and Poly(2-Aminopyridine) for Non-Enzymatic Amperometric Determination of Hydrogen Peroxide

A hybrid composite of recycled popcorn-shaped MnO2 microsphere and Ox-MWCNTs as a sensitive non-enzymatic amperometric H2O2 sensor

Construction of a novel electrochemical biosensor based on a mesoporous silica/oriented graphene oxide planar electrode for detecting hydrogen peroxide

Synergistic catalysis and detection of hydrogen peroxide based on a 3D-dimensional molybdenum disulfide interspersed carbon nanotubes nanonetwork immobilized chloroperoxidase biosensor

A MgO Nanoparticles Composite Matrix‐Based Electrochemical Biosensor for Hydrogen Peroxide with High Sensitivity

Catalytic Modification of Porous Two-Dimensional Ni-MOFs on Portable Electrochemical Paper-Based Sensors for Glucose and Hydrogen Peroxide Detection.

Porphyrin Functionalized Porous Carbon Derived from Metal-Organic Framework As A Biomimetic Catalyst for Electrochemical Biosensing