Abstract:Zhundong coal represents a large portion of China's future energy supply, because of the large reserve capacity. Although Zhungdong coal has low ash and good ignition characteristics, it also contains large amounts of sodium, which can foul and corrode heat-transfer surfaces. For economically viable use of Zhundong coal or other high-alkali coals, the alkali release must be mitigated prior to or within the burner. This can be done either by washing the coal,, using sorbents to trap the sodium, or a combination of these methods. Additive influence on the release of sodium over the entire coal combustion process was measured using a calibrated laser-induced breakdown spectroscopy (LIBS) technique. The additives used were alumina, silica, and five mineral sorbents comprising blends of silica, alumina, and various other inorganic compounds; different coal/sorbent ratios were assessed (1%, 3%, and 5% additive, by weight). During the three stages of sample coal combustion, it was found that the first stage, devolatilization, releases only similar to 1.2% of the total sodium; the char combustion stage releases similar to 28% of the total sodium; and the ash stage releases the vast majority of sodium (similar to 70%). The peak instantaneous release rate occurs during the char combustion stage. The sodium retention efficiency for all of the sorbents tested was lowest during the devolatilization stage and there was no appreciable change to the duration of the stage. Sodium retention efficiency was greatest in the ash stage, primarily due to the sheer amount of sodium released during this stage. The ash stage was effectively shortened, in proportion to the retention efficiency of the sorbent. The sodium release during the char combustion stage showed an obvious difference in profile for the various types of sorbent tested. Alumina was the least effective in reducing sodium release and retained the characteristic shape of sodium release from raw coal during this stage. Silica and sepiolite demonstrated similar sodium release profiles, which were markedly different than the sodium release profiles of either alumina or aluminosilicate mineral samples. Time-resolved sodium retention plots show an enhancement in the sodium retention by alumina during the char burnout. The addition of sodium sorbent to the coal extended the duration of the char burnout stage, which may indicate that the reduction of available sodium reduces the alkali catalysis of the char decomposition.

The role of alkali metal in N2O and NO emission during high-sodium Zhundong coals oxy-fuel circulating fluidized bed combustion

Investigations of Zhundong Coal with Removing Water-Soluble Sodium in Chemical Looping Combustion

Effect of SO2 and SO3 on the distribution of Na/S/Cl and ashes characteristics of Zhundong coal during circulating fluidized bed O2/CO2 combustion

Study on soot-sodium interaction in the initial stage during pulverized coal combustion

Characteristics of sodium compounds on NO reduction at high temperature in NOx control technologies

Catalysis of metal oxide for NOx reduction via retraining with pulverized coal

Distribution characteristics of alkali emission between gas and solid phase during Zhundong coal combustion

An experimental investigation into the fate of fuel-bound N-species during fluidised bed combustion of a dried coal slime in O 2 /Ar mixtures

Role of Carbide Slag Addition on NO Emission Characteristics During Coal Combustion

Experimental study on NOx emission characteristics under oxy-fuel combustion

Catalysis of Metal Oxide for NOx Reduction Via Reburning with Pulverized Coal

Inhibition of Sodium Release from Zhundong Coal Via the Addition of Mineral Additives: Online Combustion Measurement with Laser Induced Breakdown Spectroscopy (Libs)

Study on the mechanism of iron-rich coal gasification slag on NO conversion in high temperature flue gas of cement kiln

On-line Measurement of Alkali Metal Released From the Jet Flames of Zhundong Coal

Interactions in NOX chemistry during fluidized bed co-combustion of residual biomass and sewage sludge

Experimental study and molecular dynamics simulation on co-combustion of pulverized coal and NH3 at O2/N2 and O2/CO2 atmospheres

Influence mechanism of ammonia mixing on NO formation characteristics of pulverized coal combustion and N oxidation in ammonia-N/coal-N

Alkali metal emissions in an early-stage pulverized-coal flame: DNS analysis of reacting layers and chemistry tabulation

Influence of alkali metal Na on coal-based soot production

Effects of inorganic sodium on the combustion characteristics of Zhundong coal with fast-heating rate

Study of the NO Formation Characteristics and Ammonia-N/coal-n Transformation Mechanism of Ammonia-Coal Co-Combustion in O2/CO2 Atmosphere