Abstract:A dual circulating fluidized bed reactor for chemical looping combustion of coal has the advantage of flexible regulation on oxygen carrier circulation, but there is always part of unconverted coal char escaping from the fuel reactor (FR), reducing the carbon capture efficiency of the whole unit. In this work, a numerical investigation is conducted using the computational particle fluid dynamics (CPFD) method to examine how to improve the carbon conversion in a 50 kWth coal-fueled dual circulating fluidized bed reactor for chemical looping combustion. The improvement strategies generally fall into two categories. The first category is based on the ideas of extending the residence time of char and strengthening the mixing between the char and oxygen carrier (OC), including enhancing the FR height, increasing the number of coal feeding points, and leading combustible gas generated in the gasification carbon stripper (GCS) to the FR. The second category is to physically separate char particles from the binary material stream in a carbon striper (CS) based on the difference of terminal velocity between the char and OC particles and then recycle the stripped char to the FR again. With respect to the 50 kWth reactor, in which a two-chamber GCS is coupled within the loop seal, the full-scale CPFD simulation reveals that, when the GCS is off, the carbon capture efficiency (solely contributed by the FR) is quite low (42.3%), even if some optimizations are adopted for the FR (two oppositely collocated coal feeding points, 56.4%; doubling the FR height, 58.7%). On the other side, when the GCS is on, the carbon capture efficiency reaches over 90% significantly. To further improve the carbon conversion in the reactor, a new non-mechanical valve integrated with a four-chamber CS/GCS is designed numerically in this paper, where three-dimensional CFPD simulation is conducted to optimize the key parameters, such as freeboard height, baffle height, flow rate of OC, and superficial velocity. The integrated and compact device can function as the loop seal and carbon stripper simultaneously, and it can be operated as not only the CS mode (char is physically separated from OC) but also the GCS mode (char is gasified, and then combustible products are recycled back to the FR; i.e., char is chemically separated from OC) by regulating the operational velocity and fluidization agent. The carbon capture efficiencies of GCS and CS modes are 97.8 and 98.9%, respectively. The CS mode is more economical in terms of the operational cost, because a large amount of steam is not required herein. Finally, by means of parallel comparisons on these strategies mentioned above in performance and cost, the optimal strategy to improve carbon conversion in the reactor is proposed successfully.

Investigations of Zhundong Coal with Removing Water-Soluble Sodium in Chemical Looping Combustion

Effect of CO2/H2O on the Incipient Ultrafine Particulate Matter Formation in Oxy-fuel Combustion of High-Sodium Lignite

Inhibition of Sodium Release from Zhundong Coal Via the Addition of Mineral Additives: Online Combustion Measurement with Laser Induced Breakdown Spectroscopy (Libs)

In Situ Measurements of the Release Characteristics and Catalytic Effects of Different Chemical Forms of Sodium during Combustion of Zhundong Coal

Investigation on the Chemical-Looping Reaction Characteristics of Ningdong Coal with Manganese Ore

Release Characteristic of Different Classes of Sodium During Combustion of Zhun-Dong Coal Investigated by Laser-Induced Breakdown Spectroscopy

Research and Development of Coal-fueled Chemical Looping Combustion

The role of alkali metal in N2O and NO emission during high-sodium Zhundong coals oxy-fuel circulating fluidized bed combustion

Migration and Transformation of Sodium During Staged Coal Combustion of Zhundong Coal and Influence of Carbon Coating

Detailed Investigation on Sodium (na) Species Release and Transformation Mechanism During Pyrolysis and Char Gasification of High-Na Zhundong Coal

Effects of inorganic sodium on the combustion characteristics of Zhundong coal with fast-heating rate

Effect of phosphorus-based additives on sodium release during Zhundong coal gasification in flat flame-assisted entrained flow reactor

Slagging Characteristics of Zhundong Coal during Circulating Fluidized Bed Gasification

Effects of Water-Soluble Sodium Compounds on the Microstructure and Combustion Performance of Shengli Lignite

Situation of Combustion Utilization of High Sodium Coal

Experiments on chemical looping combustion of coal with a NiO based oxygen carrier

Effect of combustion heat on release and transformation of the sodium during Zhundong coal ash-forming process

Release and Transformation Characteristics of Na/Ca/S Compounds of Zhundong Coal During Combustion/co2 Gasification

Inhibition of Sodium Release from Zhundong Coal Via the Addition of Mineral Additives: A Combination of Online Multi-Point LIBS and Offline Experimental Measurements

The characteristics of mineralogy, morphology and sintering during co-combustion of Zhundong coal and oil shale

Numerical Investigation on the Improvement of Carbon Conversion in a Dual Circulating Fluidized Bed Reactor for Chemical Looping Combustion of Coal