Abstract:Computational simulation of the Powder Bed Fusion (PBF) process is a useful tool for predicting and analysing melt pool geometry during the deposition process. Advanced models that use Computational Fluid Dynamics (CFD) can accurately simulate the complex melt pool dynamics of the process but are typically computationally onerous to implement. CFD models require thermophysical data over a large temperature range that may be difficult to acquire for the material systems of interest. Heat conduction models, which are useful to industrial end users are easier to implement, but their accuracy can be compromised. The main difference between heat conduction and CFD modelling is the absence of convection (especially Marangoni convection). However, several sources in literature have highlighted a simple approach to mimicking the effects of Marangoni convection on the melt pool by artificially increasing the thermal conductivity of the liquid. However, due to its simplicity and lack of agreement within literature, the modified heat conduction approach is neither sufficiently robust nor universally consistent. Comparison to experimental data is lacking. In the present work, the heat conduction model is modified using an orthotropic description of anisotropic thermal conductivity in the liquid phase by applying directional correction factors. The correction factors are calibrated by comparing the predicted geometry against experimentally-obtained melt pool dimensions for single-layer, multiple tracks in Ti-6Al-4V processed by laser-PBF. After appropriate correction factors were selected, the modified heat conduction model gave results in good agreement with experiments. To test the general applicability of the approach, data from literature were analysed and simulated using the model. After correction factors were adjusted accordingly, the simulated results were validated over the range of power levels and scan speeds.

Gradient models of moving heat sources for powder bed fusion applications

A Gaussian Process-Based extended Goldak heat source model for finite element simulation of laser powder bed fusion additive manufacturing process

A new heat source model for selective laser melting simulations based on energy distribution on the powder layer and the surface of substrate

A three-phase model for simulation of heat transfer and melt pool behaviour in laser powder bed fusion process

Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes

On the application of the anisotropic enhanced thermal conductivity approach to thermal modelling of laser-based powder bed fusion processes

Heat Source Model Development for Thermal Analysis of Laser Powder Bed Fusion Using Bayesian Optimization and Machine Learning

Development of a surrogate model for high-fidelity laser powder-bed fusion using tensor train and gaussian process regression

Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening

A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool

A semi-analytical solution of 3-D transient temperature field for a uniform plate subjected to Gaussian-distribution laser heat source

Accurate prediction of melt pool shapes in laser powder bed fusion by the non-linear temperature equation including phase changes - isotropic versus anisotropic conductivity

A Polynomial Approach for Thermoelastic Wave Propagation in Functionally Gradient Material Plates

Thermal Behavior of Solid Heated by Gaussian Moving Heat Source

Analytical Modelling of Scanning Strategy Effect on Temperature Field and Melt Track Dimensions in Laser Powder Bed Fusion

New Heat Flux Model in Surface Grinding

Two-dimensional heat transfer and melt flow in the laser-impact zone at selective laser melting of thin walls -- II: Modeling

Heat transfer model and finite element formulation for simulation of selective laser melting

Modeling and numerical studies of high-precision laser powder bed fusion

Gradient of the Temperature Function at the Voxel (i,j, K) for Heterogeneous Bio-Thermal Model

The Green's Functions for Peridynamic Non-Local Diffusion.