Abstract:Manual painting is commonly conducted on an aircraft's exterior, and the coating thickness should be within the allowable range. For quality control, the thickness requires accurate assessment. However, the current non-destructive testing techniques for metallic substrates cannot be well suited to the widely used carbon fibre-reinforced polymer composites, which are less conductive. Here we present a new microwave cavity resonator sensor, in which an octagonal cross section (an intermediate shape between a cylinder and a sphere) is adopted to easily eliminate mode degeneracy. A design strategy incorporating electromagnetic simulation is presented, and an accurate model is developed for the extraction of the resonance frequency and quality factor from the asymmetrical responses. In the tests, the open cavity is placed on a composite sample, and coating thickness change causes cavity wall impedance perturbation, leading to resonance frequency shift. From the experiments, a linear relationship is seen between the coating thickness difference and resonance frequency shift, thereby facilitating the estimation process. As the resonant electromagnetic fields are similar to those of the cylindrical TE011 mode, insensitivity to the conductivity and anisotropy of the composite is also demonstrated, enabling convenient implementation. Reasonable accuracy is obtained for thicknesses up to 2 mm. In the prediction of two- and multi-layered coating cases, errors within ±5% are obtained. The sensor developed offers efficient on-site measurement of paint coatings on carbon fibre composite structures.

A CPW Resonator for Complex Dielectric Characterization of Thin Films at W-Band

An X-band waveguide measurement technique for the accurate characterization of materials with low dielectric loss permittivity

High-Order Mode-Matching-Based Single-Cavity Coaxial Transducer for Broadband Measurement of Complex Permittivity

A Dual-Scale CSRRs-Based Sensor for Dielectric Characterization of Solid Materials

An Improved NRW Method for Thin Material Characterization Using Dielectric Filled Waveguide and Numerical Compensation

A Rasorber-Like Waveguide Based on Thin Film

iQ Cavity for Material Permittivity Characterization

A Broadband, Via-Less, and Reusable Characterization Method for Advanced Packaging Materials with Multimode Gap Waveguide Resonator

A new microwave cavity resonator sensor for measuring coating thickness on carbon fibre composites

A Dual-Band Resonator Sensor for Low Permittivity Characterization

A DGS-CPW Microwave Sensor Loaded With SRR for Solid Material Measurement

Microwave cavity resonator sensor with an octagonal cross section for thickness measurement of coatings on carbon fibre composites

Complex Permittivity Characterization of Low-Loss Dielectric Slabs at Sub-THz

S-band electron spin resonance spectroscopy using a short-circuited coplanar waveguide resonator

On-Wafer Measurement of CPW with RDL Process for Substrate Effect in <i>W</i>-Band

Simpler Reference-Plane-Invariant Method for Permittivity Extraction of Medium- or Low-Loss Dielectric Samples Using One-Port Measurements

A Method to Determine Broadband Complex Permittivity of Thin Film Dielectric Materials up to 60 GHz

A Systematic Material Characterization Method via Near-Field Scanning Microwave Microscopy

High-Accuracy Complex Permittivity Characterization of Solid Materials Using Parallel Interdigital Capacitor- Based Planar Microwave Sensor

Broadband Printed-Circuit-Board Characterization Using Multimode Substrate-Integrated- Waveguide Resonator

Multiband Permittivity Measurement Using Directional Coupler Based on Groove–Ridge-Gap Waveguide