Abstract:The collapse and dissolution of the structure of the MnO2 positive electrode in the cycle process is mainly caused by the volume expansion during the phase transition process, which leads to the extrusion of the adjacent parts of the electrode and poor cycle performance. To overcome this issue, morphology of MnO2 films were controlled by adding various concentrations of surfactant Hexadecyl trimethyl ammonium Bromide (CTAB) in the electrolytic cell through changing the current distribution characteristics between substrate and solution. The obtained MnO2 nanofilm materials prepared with different concentrations of surfactant were compared from the aspects of surface morphology, specific capacity and cyclic stability. The morphology and structure of the prepared MnO2 were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer Emmett and Teller (BET). As expected, MnO2 with its unique crystal structure exhibited excellent cycling and superior performance (311.2 mAh g−1 at 0.1 A g−1, 177.6 mAh g−1 at 5 A g−1, 125% capacity retention after 4000 cycles at 5 A g−1). This capacity retention was among the highest reported so far for MnO2-based cathode materials for Zn-ion batteries. The excellent electrochemical performance may be due to its unique nanostructure, which provides enough space for the volume expansion and proper structure for the re-deposition of MnO2. This work provides an new sight to develop long-circulation MnO2 electrodes for aqueous Zn ion batteries by designing an advantageous master structure dynamics.

Study on the preparation and performance of Cr2O3-MnOx nanocomposite material as cathode for aqueous zinc-ion batteries

Application of cobalt-modified irregular cubic block–shaped MnCO3@Mn3N2@Mn2O3 composite cathode material in aqueous zinc-ion batteries

Molten salt synthesis of α-MnO2/Mn2O3 nanocomposite as a high-performance cathode material for aqueous zinc-ion batteries

The Construction of Nanoflower‐like MoO2@C Composites via Crystal Engineering for Ultrastable Aqueous Zinc‐Ion Batteries

A New High-Performance Porous Carbon-Coated Mn3O4/Na2CO3 Cathode for Suppressing Mn2+Dissolution in Aqueous Zinc Ion Batteries.

Structural regulation of Mn2O3 nanofiber cathode material for advanced aqueous zinc-ion batteries

A New High-Performance Porous Carbon-Coated Mn3O4/Na2CO3 Cathode for Suppressing Mn 2+ Dissolution in Aqueous Zinc Ion Batteries

A Cu/MnOx Composite with Copper-Doping-Induced Oxygen Vacancies as a Cathode for Aqueous Zinc-Ion Batteries

Carbon nanotube@Mn3O4 composite as cathode for high-performance aqueous zinc ion battery

Metal–Organic Framework‐Derived MnO/C Nanocomposite with Lamellar Porous Structure for High‐Performance Aqueous Zinc‐Ion Battery

Cobalt-doped Manganese (III) oxide cathode materials with enhanced electrochemical performance for aqueous zinc-ion batteries

Carbon nanofiber-coated MnO composite as high-performance cathode material for aqueous zinc-ion batteries

Nitrogen-Doped Carbon/V2O3 Nanorod Composites as Cathode Material for High-Performance Aqueous Zn-Ion Battery

In Situ Synthesis of MnO/C Nanoparticles Anchored on Reduced Graphene Oxide As High-Performance Zinc Ion Battery Cathode with Enhanced Zinc Storage Performance

Micro cubic MnCO3@MnO2 for aqueous zinc ion battery

CTAB controlled electrochemical deposition of manganese dioxide with enhanced performance in aqueous Zn-ion battery

Enhancing electrochemical performance in aqueous rechargeable Zn-ion batteries through bimetallic oxides of manganese and cobalt as electrode

In-Situ Growth of Mn3O4 Nanoparticles on Nitrogen-Doped Carbon Dots-Derived Carbon Skeleton As Cathode Materials for Aqueous Zinc Ion Batteries

Synthesis and Optimization of ZnMn 2 O 4 Cathode Material for Zinc-Ion Battery by Citric Acid Sol-Gel Method

Uncovering sulfur doping effect in MnO2 nanosheets as an efficient cathode for aqueous zinc ion battery

Adjusting Zn 2+ diffusion kinetics and storage capability of MnOOH nanofibers for high-performance cathode of aqueous zinc-ion batteries