Combinations of V 2 C and Ti 3 C 2 MXenes for Boosting the Hydrogen Storage Performances of MgH 2

Haizhen Liu,Chenglin Lu,Xinchun Wang,Li Xu,Xiantun Huang,Xinhua Wang,Hua Ning,Zhiqiang Lan,Jin Guo
DOI: https://doi.org/10.1021/acsami.0c23150
2021-03-15
Abstract:Two-dimensional vanadium carbide (V<sub>2</sub>C) and titanium carbide (Ti<sub>3</sub>C<sub>2</sub>) MXenes were first synthesized by exfoliating V<sub>2</sub>AlC or Ti<sub>3</sub>AlC<sub>2</sub> and then introduced jointly into magnesium hydride (MgH<sub>2</sub>) to tailor the hydrogen desorption/absorption performances of MgH<sub>2</sub>. The as-prepared MgH<sub>2</sub>–V<sub>2</sub>C–Ti<sub>3</sub>C<sub>2</sub> composites show much better hydrogen storage performances than pure MgH<sub>2</sub>. MgH<sub>2</sub> with addition of 10 wt % of 2V<sub>2</sub>C/Ti<sub>3</sub>C<sub>2</sub> initiates hydrogen desorption at around 180 °C; 5.1 wt % of hydrogen was desorbed within 60 min at 225 °C, while 5.8 wt % was desorbed within 2 min at 300 °C. Under 6 MPa H<sub>2</sub>, the dehydrided MgH<sub>2</sub>–2V<sub>2</sub>C/Ti<sub>3</sub>C<sub>2</sub> can start to recover hydrogen at room temperature, and 5.1 wt % of H<sub>2</sub> is obtained within 20 s at a constant temperature of 40 °C. The reversible capacity (6.3 wt %) does not decline for up to 10 cycles, which shows excellent cycling stability. The addition of 2V<sub>2</sub>C/Ti<sub>3</sub>C<sub>2</sub> can remarkably lower the activation energy for the hydrogen desorption reaction of MgH<sub>2</sub> by 37% and slightly reduce the hydrogen desorption reaction enthalpy by 2 kJ mol<sup>–1</sup> H<sub>2</sub>. It was demonstrated that the combination of V<sub>2</sub>C and Ti<sub>3</sub>C<sub>2</sub> promotes the hydrogen-releasing process of MgH<sub>2</sub> compared with addition of only V<sub>2</sub>C or Ti<sub>3</sub>C<sub>2</sub>, while Ti<sub>3</sub>C<sub>2</sub> impacts MgH<sub>2</sub> more significantly than V<sub>2</sub>C in the hydrogen absorption process of MgH<sub>2</sub> at ambient temperatures. A possible mechanism in the hydrogen release and uptake of the MgH<sub>2</sub>–V<sub>2</sub>C–Ti<sub>3</sub>C<sub>2</sub> system was proposed as follows: hydrogen atoms or molecules may preferentially transfer through the MgH<sub>2</sub>/V<sub>2</sub>C/Ti<sub>3</sub>C<sub>2</sub> triple-grain boundaries during the desorption process and through the Mg/Ti<sub>3</sub>C<sub>2</sub> interfaces during the absorption process. Microstructure studies indicated that V<sub>2</sub>C and Ti<sub>3</sub>C<sub>2</sub> mainly act as efficient catalysts for MgH<sub>2</sub>. This work provides an insight into the hydrogen storage behaviors and mechanisms of MgH<sub>2</sub> boosted by a combination of two MXenes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c23150?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c23150</a>.XRD patterns of as-milled samples (Figure S1); XRD patterns of MgH<sub>2</sub> + 45 wt % (2V<sub>2</sub>C/Ti<sub>3</sub>C<sub>2</sub>) in different states (Figure S2); isothermal hydrogen desorption curves; JMA plots; and Arrhenius's plots of as-milled samples (Figures S3–S6) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c23150/suppl_file/am0c23150_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?