Abstract:<p>An imidazolium ionic liquid (1-aminoethyl-3-methylimidazolium bromide, AMIB) was exploited to prepare thin film composite membranes (TFCMs) exhibiting high water permeability, salt rejection, antibiotics separation and antibacterial properties. Polyamide TFCMs were prepared by "piperzine ∼ trimesoyl chloride" (PIP-TMC) interfacial polymerization. AMIB molecules were anchored to membrane surface through "acyl chloride ∼ amine" amidation. Salt rejection and water flux of the modified membrane (PIP-TMC-AMIB) was 95 ± 1% (R<sub>Na2SO4</sub>) and 135 ± 5 L m<sup>−2</sup> h<sup>−1</sup> at 6 bar pressure. Thus the permeance of the modified TFCM is ∼ 4 times as high as that of lab-made pristine PIP-TMC TFCM. The PIP-TMC-AMIB membrane shows high water permeance (∼ 25 Lm<sup>−2</sup> h<sup>−1</sup> bar) and effective rejection (>90%) toward antibiotics such as 50 ppm ciprofloxacin, tetracycline, oxytetracycline, levofloxacin and erythrocin. In addition, the membrane exhibits effective separation of antibiotics/sodium chloride mixtures, and highly improved antibacterial properties by killing 99% E. coli colonies.</p>
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to improve the performance of polyamide nanofiltration membranes, especially in terms of water permeability, salt and antibiotic separation, and antibacterial performance. Specifically, the researchers modified the surface of thin - film composite polyamide membranes (TFCM) with imidazolium ionic liquid (1 - aminoethyl - 3 - methylimidazolium bromide, AMIB) in the hope of significantly improving these performances.
### Main problems
1. **Improve water permeability**: Although traditional polyamide TFCM is widely used in the field of nanofiltration, its water permeability still needs to be improved. In this paper, by introducing AMIB molecules, the aim is to greatly increase the water flux.
2. **Enhance the separation performance of salt and antibiotics**: In order to effectively treat wastewater containing high - concentration salt and antibiotics, it is necessary to develop nanofiltration membranes with high - efficiency separation capabilities. The researchers hope that through AMIB modification, the membrane will have better separation effects on salt and antibiotics.
3. **Endow antibacterial performance**: Traditional polyamide membranes lack antibacterial properties and are easily contaminated by microorganisms. In this paper, by introducing AMIB molecules with antibacterial properties, it is expected to endow the membrane material with antibacterial ability, thereby prolonging the service life of the membrane and reducing maintenance costs.
### Solutions
The researchers solved the above problems through the following methods:
- **Surface modification**: Using the "acyl chloride - amine" amidation reaction, the AMIB molecules are covalently anchored on the surface of polyamide TFCM.
- **Performance testing**: Through a series of experiments (such as water flux testing, salt and antibiotic separation testing, antibacterial testing, etc.), the performance improvement of the modified membrane was verified.
### Experimental results
- **Water flux**: The water flux of the modified PIP - TMC - AMIB membrane is 135 ± 5 L m\(^{-2}\) h\(^{-1}\), which is about 4 times higher than that of the unmodified membrane.
- **Salt and antibiotic separation**: The rejection rate of the modified membrane for Na\(_2\)SO\(_4\) is 95%, and the rejection rate for antibiotics (such as ciprofloxacin, tetracycline, ofloxacin, etc.) exceeds 90%.
- **Antibacterial performance**: The modified membrane can kill 99% of Escherichia coli colonies, showing excellent antibacterial performance.
In conclusion, this paper significantly improves the water permeability, salt and antibiotic separation performance, and antibacterial performance of polyamide nanofiltration membranes through surface modification technology, providing new ideas for the design of high - performance nanofiltration membranes.